-
Standardise Zero Formatting between Modules (& Classic UX) and New UX
When setting number formats, the formatting should be consistent across Modules/Classic/New UX. Below, see an example where a material zero balance is formatted as a hyphen as selected. In the New UX, this appears as a non-zero value. The workaround is to round the output to zero, but Anaplan should format consistently…
-
FIRSTNONBLANK() as a Function
Add a "FIRSTNONBLANK()" function that will evaluate each of the arguments and return the first one that is not blank. This would allow for formulas like the following to be greatly simplified and potentially better performing: Example 1: IF ISNOTBLANK( line item A) THEN line item A ELSE IF ISNOTBLANK( line item B) THEN…
-
Sort Module Overview in Settings by Cell Count
I was wondering if it is possible to sort the modules by their cell count in the settings. At the moment there is only the possibility to export the model overview and then sort it in Excel for example. This extra step would be saved by having a built-in sorting function. For me it is important to sort the modules by their…
-
Indication in blue print if a Line Item is used as DCA
There should be a column in blue print view of a module like "Referenced By" highlighting modules where a line item is used as a DCA
-
Hide items on the model map
As we put headings as empty modules, these then appear on the model map. Could we not include zero cell modules on the model map, or give the builder the ability to exclude.
-
Allowing Time Sum function to accept 1st argument a function
I would like to ask if you may give timesum function ability to accept other function within timesum parentheses [ex: Timesum(previous(revenue),start period, end period)]. The main reason I asked this, I would like to calculate the average 3 month based on previous figure. [Excel example] In meantime, I would also like to…
-
Remove Selective Access for a module
We encountered a situation where we had selective Access enabled for Regions. A user had following access: Region 1 - Write Region 2 - Write Region 3 - Read Region 4- Read Region 5 - Write. We had to create a boolean filter on Regions. Since, the user has only read access to Region 3 and 4, he could not set the filter for…
-
Selective Summaries: Set Summary individually for each dimension
Sometimes, it's the case that we do not need summaries for all dimensions that are applied to a module - I might need calculations to happen for all intersections applicable for the dimensions applied but need roll up only for one of the dimensions which is currently achieved by creating a separate module at higher level…
-
Enable cards from multiple models within the new UX app
Enable cards from multiple models within the new UX app. Currently you can add multiple models to a page, but when you add cards sourced from different models you have to toggle to that model at the selector. After creating the cards, you have to toggle to this modal at the top otherwise the data is killed as per the…
-
Enhance "Delete from List Using Selection" by accepting filters in combination with Users list
As a model builder, I would like to have the possibility to create an action with the option "Delete from List Using Selection" by using booleans line-items in combination with the Users List additional the List where it is needed to delete the elements. Currently, when trying to build an action "Delete from List Using…
-
Setting to restict user from selecting list items multiple times
In some scenarios, where you need the user to map a list item with another list item (one to one mapping), it would be useful to have an Anaplan setting that restricts the user to select a list item only once in the field. Currently, you need to add some manual check to make sure that each item is mapped only once.
-
New UX for modeling: refresh dashboard button for classic
As users move to the new interface also for classic dashboards, the "refresh" button becomes even harder to access. Now you have to right click on the tab name to open the tool bar, where the refresh button is. I know that classic dashboards are no longer priority, but this new interface makes it slightly worse to deal…
-
New UX for modeling: Switch between models and keep the module/list tabs open
When using the new navigation bar to switch between models, it would be great if Anaplan can keep the tabs for modules / lists that you have open already. Of course with a time stamp on it, maybe 30min or 1h. So if you go back to that model later, the same modules / lists would already be opened. Ideally also with the…
-
New UX for modeling: Dragging column width in modeling screens
Ability to drag the columns to be bigger or smaller on modeling screens, such as blueprint view but also the settings pages (modules, actions, etc). That's especially useful for the second tab "Imports" on the Actions setting page. It's currently impossible to read the content when we use saved views, and there's no…
-
New UX for modeling: Formula tips
In the new formula editor, it would be great if we could get formula tips, similar to excel that gives you a cheat-sheet of what arguments are needed and in what order. So instead of having to open an Anapedia page everytime to remember the order of the functions I use left often, this would pop up when I start typing in…
-
New UX for modeling: Formula broken down into lines & color coded
In the new modeling UX, it would be great if the formula is broken down into lines and indented when different parts of the formulas are in use (especially for multiple IF statements). Right now, even though the colors change per formula, it's hard to find where the breaks are. Additionally, right now every IF statement…
-
Configure Default Number Format for Entire Model
It would be nice to be able to set a default number format for an entire model. We use the same number format across all modules and models so we're spending a significant amount of time modifying this setting from the current default. It would be very beneficial to set this format upfront. I saw this idea labeled as "Not…
-
Format Column for List Formatted Line Item in Module Blueprint Export
When we export module blueprint to a file, list formatted line item has the list ID as value in the Format column instead of the name of the list itself. It will be useful if the list name is also added so that the exact list used by a specific line item can be known more easily without referring back to Anaplan blueprint.
-
Enable placement (Before, After, Top, Bottom) of new module upon Insert of module.
Similar to the drop down list when adding a new member to a list, it would reduce steps if I could add the new module to the Bottom of the display or After a selected module. In order to list modules sequentially, eg. SYS01, SYS02, SYS03, I must insert the module, then go back to the modules list and Reorder.
-
New Model Experience - formula editing field improvement
I am sharing here one idea that would make the New Model Experience even better than it is now: Automatic formula indentation / keeping white spaces and new line hits in formula text It would be quite nice to be able to keep the formulas more friendly-looking and let devs to work with them easier. Colours in formulas made…
-
Allow filters across multiple line item formats
I need to be able to apply a filter to my line items to show any line that is blank regardless of format. Currently if I use >0 it will hide all lines with text formatting. The ability to add 2 filters for is not blank or is >0 would also be an acceptable solution
-
New Modelling Experience Button Turns OFF in normal browsing mode of Google Chrome and MS Edge
The New Modelling Experience Button/Switch/Toggle turns off automatically if a user logs out and logs in again. This behaviour has been recorded in Normal Browsing Mode of Chrome & MS Edge. However, it does not seem to happen in Incognito Mode.
-
Searh Bar Location within the Formula Area in the New Modelling Experience UI
As a user in the New Modelling Experience, I would like the formula search bar to not cover the body of the formula, so that it is easier for me to navigate my formula while performing a search action within the formula area. Currently the search bar will cover part of the formula upon its invocation, which is not user…
-
New Model Experience: Re-open last closed tab
Often when you are model building or analysing an issue, you close a tab (be it a dashboard or a module) and realise you should have kept it open. Often that then means having to go away and search for the object again. It would be really useful if like on internet browsers like Chrome, you had the option to re-open the…
-
Manage Pre-Allocation in List/Config
I read a good article on LinkedIn by our colleague Mark Warren. It was about Pre-Allocation for avoiding model saves. Model saves may have impact on performance. Please see the LinkedIn post: https://www.linkedin.com/posts/mark-warren-45649ab_reducing-saves-in-data-hubs-activity-6796397489789399040-uGOR The led me to the…
-
Search Actions in the New Modelling Experience
Hi Team The new modelling experience is great, giving a fresh feel to the design. I like the search option centralized as i don't have to do many clicks. Currently it has Modules, Dashboards and Lists. Can you include Actions too ? Thanks Kudi
-
Make the Roles->Lists Section Uneditable if the List is Structural List
We Know that the Roles->Lists Section need to be checked when there is a need for an end user to edit the list and the list here would mean Production List. Idea I am proposing is to lock down the Roles->Lists enabling feature for all Structural Lists so that WSA's don't get the option of enabling it. This way Anaplan will…
-
Power Function Update
POWER function is unable to calculate all equations correctly. Cube root of '-8' is '-2' But when I tried the "POWER(-8, 1 / 3)" calculation, it resulted as "NaN" (shown in Image)
-
Ability to Export Adhoc from NUX
Unlike Classic, New UX doesn't have the option of allowing users to export the module/view from the dashboard directly without the pre defined actions. Idea is to provide the option to the end users so that they can export the data without running any pre defined export actions.
-
Allow ISFIRSTOCCURRENCE to search against time
IFO returns true for the first occurence of a value against a specific list formatted dimension. i would like the possibility to validate against the time dimension as well.