3.3.12 Create product Replenishment Page

ankitaga2000
Frequent Contributor

3.3.12 Create product Replenishment Page

I am trying to create UX page for this. I am getting all Checked by default in the saved view  for the months but when I am using the same saved view in UX page I am not able to edit any of them. Selection of months in the top most grid.

ankitaga2000_0-1616324284980.png

My Saved view

ankitaga2000_1-1616324329407.png

All are editable in this. now in UX page

 

ankitaga2000_2-1616324375309.png

They become uneditable. I dont understand why this is happening.

Even the below INV01 grid is not editable in UX  page. But the actual grid is editable .

ankitaga2000_0-1616324818963.png

 

 

Regards,

Ankita

 

8 REPLIES 8
JaredDolich
Moderator

Re: 3.3.12 Create product Replenishment Page

@ankitaga2000 

It's a little bit hard to find, but you can turn your grid to be editable by clicking on the "grid" tab in the Card Configuration. There you can flip a little switch to make it editable.

EditMode_001.png


Jared Dolich
ankitaga2000
Frequent Contributor

Re: 3.3.12 Create product Replenishment Page

Oh I missed that out !! @JaredDolich 

Thanks for telling. It worked. 

Also for the below Saved view 

ankitaga2000_0-1616335594720.pngankitaga2000_1-1616335607892.png

 

ankitaga2000_2-1616335629289.png

 

I am putting the weeks filter but still I am getting month too (JAN). I dont know why.

 

Regards,

Ankita

JaredDolich
Moderator

Re: 3.3.12 Create product Replenishment Page

@ankitaga2000 

Try using SYS01 Weeks Only? filter on that. 

SYS01_Blueprint.png


Jared Dolich
ankitaga2000
Frequent Contributor

Re: 3.3.12 Create product Replenishment Page

This worked as I changed the filter but there are other problems which came up.  Stuck in the conditional formatting condition for the ending inventory. Where to define the condition ?

ankitaga2000_0-1616341040923.png

ankitaga2000_1-1616341056188.png

 

Also My Planning Period Filter is not getting reflected in the below grids.

ankitaga2000_2-1616341480624.png

@JaredDolich 

 

JaredDolich
Moderator

Re: 3.3.12 Create product Replenishment Page

@ankitaga2000 

For conditional formatting it depends if you use a saved view or custom view. If you built a saved view then you set the conditional formatting in Classic with your saved view. If you used a custom view, you can set the conditional formatting on the grid - there's a little icon on the upper right hand corner.

Your time filters might not be working because you haven't applied the filter to your grid. Same logic as above.


Jared Dolich
ankitaga2000
Frequent Contributor

Re: 3.3.12 Create product Replenishment Page

Qi have applied the time filters to the grid. Time filter grid is a saved view. How to apply filter to saved view grid . Also I got the conditional formatting way in custom view . But if you see the above screen I am not getting how to apply condition in that for ending inventory less than safety stock way . 

Misbah
Moderator

Re: 3.3.12 Create product Replenishment Page

@ankitaga2000 

 

There is a difference between the Custom View and Module View. Custom View is the something which you can edit, change, re pivot, apply the conditional formatting, sort and do other stuff while working on Page Creation in NUX. On the other hand Module View is the view that is saved in the module and you won't get any option to change it in NUX. It will come as-is from the Module or Saved View of the module.

 

Misbah

ankitaga2000
Frequent Contributor

Re: 3.3.12 Create product Replenishment Page

I changed it to custom view and then applied the filters and it worked . My saved view was not working properly .