Lvl 3 TAR04 Account segment total by country

kunal_311
Frequent Contributor

Lvl 3 TAR04 Account segment total by country

Hi, 

I was validating my build of TAR04 module. While my All Segment data is matching, the individual segment data(small,medium,large) aren't. See attached image; first grid is my build and second the one from training. 

 

kunal_311_0-1618749838167.png 

kunal_311_1-1618749977533.png

 

I checked my system module and all segments are mapped to each account. what is it that I am missing?

1 ACCEPTED SOLUTION

Accepted Solutions
kunal_311
Frequent Contributor

I was able to figure it out.

View solution in original post

14 REPLIES 14
ChrisAHeathcote
Community Boss

@kunal_311 

Check your summary settings.

Chris
HeathcoteAndHerran.com
kunal_311
Frequent Contributor

Hi @ChrisAHeathcote 

 

I used SUM as summary settings as it allows sum for all segments & for all regions. I tried other summary settings but they did not work.

My solution

kunal_311_0-1618855193532.png

Training Solution:

kunal_311_1-1618855225537.png

 

 

 

 

ChrisAHeathcote
Community Boss

@kunal_311 

I can see from the screenshots that the totals by country match. 

The totals by segment are different therefore the problem must be in the mapping. 

I recommend that you import the data that informs the mapping again as it appears that the distribution in your mapping is different that the example.

Chris
HeathcoteAndHerran.com
kunal_311
Frequent Contributor

Hi @ChrisAHeathcote 

 

First of all, Appreciating your guidance on the said issue.

The mapping was already there in the "SYS02 Account Details" module which we got by downloading the Level 3 Starter model at the start so No import as such is done by us in that case.

To cross-check I again downloaded the starter model and rechecked my values in "SYS02 Account Details" and they are correctly mapped.

kunal_311_0-1618946938488.png

 

kunal_311
Frequent Contributor

I was able to figure it out.

FlorianB
New Contributor

Would you mind shedding some light on how you solved it? I encountered the exact same problem, and also have correct total values, but incorrect segment values.
DenisaBontas
New Contributor

Hello,

 

I Have the same problem here. I downloaded the model again, but the I think that the mapping of the segments are different now from the ones that were used in the training solution.

 

Do you have any solution for that?

 

Thanks

jpackham
New Contributor

Hello,

 

The mappings are correct if you've taken them from the Level 3 Starter model. I initially redownloaded as well just to be safe. I know that @Misbah had made a comment in another thread on this - Take a look at your source for the sales targets by segment, are you using the initial sales target, the final, or something else? Hopefully this helps without giving anything away.

Good Luck!

megha09
New Contributor

Did you find any solution for this?