Filtering time intervals on the UX

ClarenceA
Regular Contributor

Filtering time intervals on the UX

Hi I'm trying to figure out how one filters time intervals on the New UX. Doesn't appear where one can select months in lieu of weeks or quarters for that matter. I may have to do that at the model level. Thing is how does one?

Is the solution to create a Time by Weeks module in the model and have that linked to the module or saved view we are trying to display on the UX? If so what logic should I use to enable just the weeks, months or quarters as the case may be? Appreciate any suggestions, better still with an illustration.

Kind regards,

Clarence

1 ACCEPTED SOLUTION

Accepted Solutions
vinayvm
Certified Master Anaplanner

Re: Filtering time intervals on the UX

@ClarenceA ,

 

If you are looking to display weeks/qtrs/years based on a user input, you might want to check the below thread:

https://community.anaplan.com/t5/Anaplan-Platform/Dynamic-Time-filter-in-the-new-ux/m-p/110191#M2660...

 

Best Regards,

vinayvm

View solution in original post

6 REPLIES 6
LipChean_Soh
Certified Master Anaplanner

Re: Filtering time intervals on the UX

Hi @ClarenceA 

 

Perhaps you can attach an Excel mockup of what you're trying to achieve?

 

Thanks,

LipChean

ClarenceA
Regular Contributor

Re: Filtering time intervals on the UX

Thanks Lip Chean. There's another reply provided by Vinay that looks interesting with the Filters although I did something similar but not sure why it's not showing up as expected on the NUX. What I did was to create a filtered Saved View and referenced that in the NUX but for some reason the filtering is not showing up as expected.
vinayvm
Certified Master Anaplanner

Re: Filtering time intervals on the UX

@ClarenceA ,

 

If you are looking to display weeks/qtrs/years based on a user input, you might want to check the below thread:

https://community.anaplan.com/t5/Anaplan-Platform/Dynamic-Time-filter-in-the-new-ux/m-p/110191#M2660...

 

Best Regards,

vinayvm

View solution in original post

ClarenceA
Regular Contributor

Re: Filtering time intervals on the UX

Many thanks @vinayvm let me check that out!

ClarenceA
Regular Contributor

Re: Filtering time intervals on the UX

Hi @vinayvm this is an interesting solution!

To get it to work with the NUX is the idea to have a filtered Saved View to be referenced in the NUX?

Best regards,

Clarence

vinayvm
Certified Master Anaplanner

Re: Filtering time intervals on the UX

@ClarenceA ,

 

In the thread, there is a SYS01 Time Filters module which has a lineitem named Filter. You can use any one of the following:

- In the NUX, you can use it to create a custom view (recommended)

- Create a saved view in your module, and use that module view in NUX

 

Best Regards,

vinayvm