Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

Highlighted
Occasional Contributor

Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

The instruction states to 'run the 9. Import Data from Hub process to pull data from the Data Hub model into the DAT03 Historic Volumes module in the Supply Chain model.'

 

I ran into this problem while trying to run all actions in process 9. I checked my Data Hub and nothing seems to be wrong with DAT03.Export view.

 

Explored all the mentioned options on below pages:

1. https://community.anaplan.com/t5/Academy-Training/Level-2-Sprint-2-Import-into-DAT03-Historic-Volume...

2. https://community.anaplan.com/t5/Academy-Training/Level-2-Import-into-DAT03-Historic-Volumes/m-p/761...

but not able to understand how to resolve this issue. Kindly help.

5 REPLIES 5
Highlighted
Super Contributor

Re: Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

Hi @VGSonawane,

 

To Overcome this error follow these steps.

 

Step 1:   Go to Actions -> Import Data Sources

 

Step 2: Click the particular source object and select New Source -> Connect to Anaplan Model.

 

1.JPG

 

Step 3: Select the saved view in Data hub which you have created.

 

Step 4: Go to Actions -> Imports, edit the respective actions and map accordingly.

 

2.JPG

 

Step 5: Execute the Action.

 

if you face the same error "Model Object Could not be located" for other actions then follow the steps which i have mentioned for the respective actions.

 

 

Thanks,

 

Sorna Raja Prabhu
Highlighted
Occasional Contributor

Re: Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

@Sorna Raja Prabhu Thank you for the solution. On step 4, getting error as shown in the attached image.

 

Edit data.png

Highlighted
Super Contributor

Re: Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

Hi @VGSonawane,

 

The reason for the error is SOURCE OBJECT is not assigned for the import action 9.1

 

You can see the SOURCE OBJECT difference between import action 2.6 and 9.1

 

in the import action 2.5 or 2.6

                  SOURCE OBJECT NAME is tagged to your datahub.

 

in the import action 9.1 

                  SOURCE OBJECT NAME is not tagged to your datahub that's why.

 

STEP 1: Copy the Source Label for the import action 9.1 and use the search bar to search in Actions - >import data sources.

 

STEP 2: Click edit and locate your saved view in the datahub which you have created.

 

1.JPG

 

STEP 3: Click Actions -> Imports then edit the mapping and run the actions.

 

All the Best

Thanks,

Sorna Raja Prabhu
Highlighted
Occasional Contributor

Re: Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

@Sorna Raja Prabhu  Below solution worked for 9.1 import but now new error flashed for 9.2. Images attached below. Line item is similar in both modules.9.2_1.png9.2_2.png

Super Contributor

Re: Level 2 - Sprint 2 Import into DAT03 Historic Volumes using actions

Hi @VGSonawane,

 

Check the mapping for the import action 9.2

 

You have not mapped in the correct way.

 

 

All the Best

Thanks,

Sorna Raja Prabhu