Bridging Versions With Waterfall Charts

General Requirement

For a set of measures, end users want to be able to choose any two versions and see the calculated variances between them. They also want to see a visualization in the form of a waterfall chart that explains the difference between the selected versions.

Problem Statement

Let’s say we have a summary measure, EBITDA perhaps, that is made up of 10 component items, and that we have 6 native versions in our model. The user wants to be able to choose any two of those versions and see the variances for each component and a chart showing the bridge between the EBITDA of the first version with that of the second:­­

andrew_martin_1_0-1608149787230.png

Overview

Native versions in Anaplan provide for simple variance calculations between versions, e.g. Actual – Budget. But it is common to have many versions—Actual, Budget, 11 monthly forecasts per year, Scenarios, etc. Adding calculated versions for variances between these is not a good option for the following reasons:

  • A lot of needless space would be used in modules where they are not needed.
  • Usability is compromised in many cases.
  • High maintenance burden.

Variances are often nuanced calculations too. For example, the signage might be different depending on the display protocol of an item in a P&L list, or whether an increase in a value in a list item is deemed to be favorable or unfavorable.

All of the above means that in most cases, variances are handled better and more easily as line items.

Solution

We will have a data module somewhere in our model with the calculated components by time and version (and any other dimensions the module Applies To, such as Cost Centers). Here I have just entered some data manually:

andrew_martin_1_1-1608149787237.png

Each component is a line item, as you would expect.

In Anaplan, we can’t have line-item calculations that intersect with one another, so we need to convert the components to lists in order to calculate the versions and the variances as line items. This is necessary to engineer the calculation to be based on end-user version selections.

The first P&L Component list is a Line Item Subset. Mine looks like this:

andrew_martin_1_2-1608149787242.png

Now, we need a module to collect the data against this LIS:

andrew_martin_1_3-1608149787247.png

At this point, we need to consider the requirement for a user to be able to select any two versions. This feature is best served through the use of list formatted line items so that they can select from dropdown lists:

andrew_martin_1_4-1608149787250.png

This is better than offering a Boolean selection because they can only pick one item for each version.

But—it is not possible to format a line item with Native Versions. We need a list that replicates the Versions. A line-item subset will work well here, but we need to model a way to calculate the versions as line items.

Above we have a module by LIS P&L Components and Versions. We need to create LIS Versions, but in Anaplan we can’t dimension a module by more than one Line Item Subset. We, therefore, need a module that uses a normal list for the P&L Components in place of LIS P&L Components. If it does not already exist for other purposes, then the creation/maintenance of this list can be synchronized with LIS P&L Components via a System module.

The new module CAL02: P&L by Component List looks exactly the same:

andrew_martin_1_5-1608149787257.png

…but is dimensioned by P&L Components, a normal list, but NOT Versions. This is because the line items represent the versions. You can see the full formula for Forecast 2 in the formula bar above. The formulae for the other line items are identical but for the version names.

You will also see in that formula that I have used a simple Mapping module to map LIS P&L Components to P&L Components, which has a FINDITEM formula to populate it.

andrew_martin_1_6-1608149787262.png

I can now build my LIS Versions list to use in my Version Selection module to format for use as a dropdown:

andrew_martin_1_7-1608149787264.png

I also need a module dimensioned by LIS Versions to use as a source for my variance calculations. This also needs the P&L Components list since we can’t have two Line Item Subsets in one module:

Again, this looks exactly the same with a simple Collect formula bringing the data through.

andrew_martin_1_8-1608149787269.png

Now we are in a position to build our Variance Calculation module, based on user selections:

andrew_martin_1_9-1608149787279.png

andrew_martin_1_10-1608149787288.png

Now we have our variances calculated depending on the versions we select. All good so far. But the variance column by itself does not provide all we need for the waterfall chart. We need to model a SINGLE COLUMN with the EBITDA of Version 1 as the starting point, the variances for each PL Component between versions as the movements, and the EBITDA for Version 2 as the end point.

To do this we need another module, with the components converted back to line items. I created a Waterfall Report module, without Versions.

andrew_martin_1_11-1608149787316.png

You will notice that another Mapping module is used as a lookup here to avoid multiple SELECT statements that go against the Planual. The module uses LIS Waterfall:

andrew_martin_1_12-1608149787320.png

…and simple Finditem to populate:

andrew_martin_1_13-1608149787324.png

Now we have our start and end values, bookending the movements that bridge between them, in a single column:

andrew_martin_1_14-1608149787326.png

This is all we need for our Waterfall chart:

andrew_martin_1_15-1608149787329.png

Now, if you think that you will have many users wanting to make different selections while using this feature simultaneously, then you might need to add the Users list to the Version Selection Module, the CAL04: Variance Calculation module, and the OUT05: Waterfall Report module. Take care though, as this might have sizing implications.

The content in this article has not been evaluated for all Anaplan implementations and may not be recommended for your specific situation.
Please consult your internal administrators prior to applying any of the ideas or steps in this article.
Comments

Great write up on what can definitely be a difficult report to build.

 

I believe the inability to format a line item with Native Versions is the biggest drawback to using native versions currently. Unless there is a requirement to use the native versions I would always look to use a list for versions as it gives so much more flexibility without any real downsides. 

Good article for newbies. But it is also well documenting how freaking complex it is to build insightful version comparison reports in Anaplan.

Question: Can the number of components be dynamic? For example, between two versions (actual and budget) I have variances generated by customers (+90 customers) and the list is growing. If I read the post correctly, I would need a module for my customers with +90 ("Component 1.. Component 2..ect.) line items. This seems really inefficient to me and will require ongoing maintenance. I am hoping that there is a solution to dynamically size the number of components based on my growing customer lists! 

 

Thanks in advance ~ Marc 

Version history
Last update:
‎12-20-2020 04:54 PM
Updated by:
About the Author
Labels (1)