About filip.sypniewski

filip.sypniewski

Hi @Nive, I also bumped into this issue, and added the request on the Idea Exchange, you can support it https://community.anaplan.com/t5/Idea-Exchange/NUX-Line-Item-selection-on-nested-dimensions/idi-p/74836

filip.sypniewski

Hi @Scorina, I did not recall having issues like you mentioned while working on my Level 1 last year. However, indeed there are small errors, it looks like a typo! Probably happened with the release of new version of the course. Not sure if @ChrisMullen has time to check it here, so also best if you can inform Academy about it academy@anaplan.com For sure it will help other people in the future!

filip.sypniewski

Is it? I cannot see the year on your last screenshot. This might cause the troubles. In principle if you have your Year, that should go well as you indicated (based on Summary settings).

filip.sypniewski

@CommunityMember113484, sorry, I think I misunderstood your question. Still waking up on monday morning 🙂 I can't see any time dimension in your output module, I think you should add this dimension? Whether it is Q or Y time scale, based on your needs.

filip.sypniewski

Hi @CommunityMember113484, you need to add Top Level to your lists, that is very simple and can be done quickly. 1. Go to the lists 2. Find your lists and just input Top Level

filip.sypniewski

Same here. It seems to be known issue already and there is workaround posted: https://community.anaplan.com/t5/Known-Issues-and-Workarounds/NUX-Export-Action-Failing/m-p/79633

filip.sypniewski

Great features! and thank you for the summary @Misbah

filip.sypniewski

Hi, I would like to be able to control the options available to users on the worksheet context menu. I am quite concerned that users can delete list elements from worksheet. As per Anapedia (https://help.anaplan.com/anapedia/Content/New_User_Experience/Use/Worksheets/Grid/Menu/Delete-a-list-item.htm) I understand that they can only do that if they have write access to the list. However, this is often the case, they have write access since they run certain action to update the list, to give an example. This way, they are able to delete list elements on worksheet as well. I would like to be able to control which options of worksheet context menu are available to Users and have the possibility to disable some of them.

filip.sypniewski

Hi @Sravan_Kumar, in principle the actions that you are configuring on worksheet are based on existing actions in your model. Therefore you can publish them on both worksheet and board. If you create any forms in NUX, you can also use them on Boards. Hope this helps.

filip.sypniewski

Hi @bleeds, it seems that your formula is correct in INV02 module. Therefore you should review: - your source module - do you have all numbers aligned with screenshots provided for INV01 module? How are you calculating Safety stock exception count? - SYS08 module, if your Country Made is correct

filip.sypniewski

@julio.harada if you enter an app, press "manage this app" and choose "show models" you can see which models are linked to the app. I agree though that the app should not be visible to users if they do not have access to it! +1

filip.sypniewski

Hi @girik, I already posted it on Idea Exchange https://community.anaplan.com/t5/Idea-Exchange/NUX-Open-Home-Page-after-opening-an-app/idi-p/77743

filip.sypniewski

Okay, one more question, are you working on Personal Page? I think so, then you cannot configure actions on personal pages, it is only available on default pages, not personal. Is it correct?

filip.sypniewski

Hi @charantej, you need to enter Anaplan Academy https://learning.anaplan.com/totara/dashboard/ on the dashboard you will see different courses available, select Level 1 Model Building You will find all instructions and requirements in the course itself. Good luck!

filip.sypniewski

@Sravan_Kumar, Hmm, I can see it now. I was thinking maybe it is because your Model is offline, but I checked on my test app, and it does not cause any issue. Last though, do you have any actions (imports, exports) created in your model? Maybe it is not displayed as there are no existing actions and you cannot therefore publish any of them...

filip.sypniewski

Hi @Sravan_Kumar, it will only display in WORKSHEET designer, are you sure you are looking at WORKSHEET Page not BOARD? If you have Page Builder role assigned, you are on worksheet, and enter design mode, you will see this button.

filip.sypniewski

Hi @Sravan_Kumar, if you use 'Actions' card and go to the configure mode, you will see that you can select existing processes, imports, and exports which should be displayed on your Page. After selecting, for example, the processes you want to show to the Users, you need to press 'Add' on the right bottom corner. Afterwards, you need to save your Page by pushing button 'Publish' in top right corner. Does it work for you? Let me know!

filip.sypniewski

Hi @Sravan_Kumar, in principle I would say: if you want to publish big grid e.g. summary of loaded data, go for worksheet. if you want to summarize your data, add some actions, graphs etc, use board. Personally, I use boards most of the time, but I really like 'Additional Insights' panel on the worksheet. So, to sum up, there is no better in my opinion, it depends what you are trying to achieve.

filip.sypniewski

Indeed as explained below, it seems that there was an old version of the model. I did it in November 2019 so probably it was old version.

filip.sypniewski

Hi @sdavidko, I can see that Line Item "Weeks only?" is used in another line item "Not 1st Week of Timescale?" which is referenced in INV01 module. It seems you might be missing something.

filip.sypniewski

@rochellemara then you are not Workspace Administrator. You need to be Workspace Administrator to be able to edit mapping of an action. Please contact your Workspace Administrator to grant you access.

filip.sypniewski

neha.bp.sharma@accenture.com, you can achieve it by publishing for example Text, Image, or even Grid and linking it to other Page. Please see below one of my examples where I used Image card:

filip.sypniewski

Hi @sdavidko, you did not attach the screenshot. Can you please do that so I can help you?

filip.sypniewski

Hi, in User Experience we can build really nice Home pages with navigation buttons. This is great start for Users in their planning experience. However, I would like to be able to select that this page is opened when I open an app. So the idea is similar to landing page in classic environment. This could be great improvement for User Experience. It will be easier for Users to start working in an app, as well as looks much nicer than the current landing page. Ideally, it would be possible to set it by Role, if there are users with different Roles using one app.

filip.sypniewski

Hi neha.bp.sharma@accenture.com, I do not think it is possible to publish list as page selector in NUX. It will appear only on Context Selector menu, when it is dimension of any module published on a Page. You can easily search using "find" box, when you open any of the context selectors.

filip.sypniewski

Hi @darshnam, please see here: https://learning.anaplan.com/course/view.php?id=978 I think this is what you are looking for, good luck!

filip.sypniewski

Hi @Rajasekhar, can you provide screenshot of your module including dimensions and line items? It is not completely clear what is the case.

filip.sypniewski

Hi @sdavidko, you need to activate Synchronized Selection to achieve it. You can find more detailed information in this article: https://help.anaplan.com/anapedia/Content/Modeling/Working_with_Data/Selections/Selections_and_Synchronization.html Let me know if you have any questions!

filip.sypniewski

Hi @Brian_Scanomi, you will not able to achieve it via process, it is not allowed to create members with the same name on different levels of the hierarchy using process, as you noted that could be achieved only manually. There are couple of solutions though: - concatenate name & code on one of the level before importing it to the list (I go for this one the most often) - add additional part of the name e.g. Ice Cream Group on higher level Let me know if you have additional questions!

filip.sypniewski

@CommunityMember111277 check here: https://help.anaplan.com/anapedia/Content/Modeling/Manage_Models/Workflow.html

Online Status	Offline
Date Last Visited	9 hours ago