About aashca9

aashca9 · ‎01-28-2021

@JaredDolich In my experience, I haven't seen a limit on how many or how much you can archive. As I mentioned in my previous comment, we archive our Models almost on a daily basis including Data Hub. However, that being said, one thing to keep in mind is that if your archived model# grows over 5000, then you might run into interface connectivity issues depending on what you are using with regards to integration.

aashca9 · ‎01-28-2021

A couple of things that I have observed with "Copy and Archive" feature in Anaplan: 1. If someone accidentally deletes a model, then you can always recover it from the archived model. 2. If there are some data related issues, where some data was either wrongfully overwritten or deleted, instead of reversing the model to the previous state/process id (which may lead to multiple people having to re-do their work if a ton of activities took place after the deletion/overwriting of the data), you can always used the data from the archived model. We perform a daily backup by coping and archiving all the models, especially during the month end/period close timeframe.

aashca9 · ‎01-06-2021

I am sure you might already know about this, but the correct platform to look for Anaplan jobs would be either LinkedIn, or any other job site. You can also check out Anaplan partners as well as all the companies that use Anaplan, and go on the company sites to look for any open positions.

aashca9 · ‎07-28-2020

Simple answer as mentioned by other users in this list is "Yes". If you are only looking to import/move a model from one Workspace to another Workspace, follow the steps listed below: 1. Take the copy of the model that you want to move. Rename it if you'd like. 2. Go to the Workspace where you want to move this model to, click on the top right on the screen where your initials are and click on Model Settings. 3. Go to Manage Models and then click on "Import". 4. Enter the name of the Model (whatever name you'd like to give) and select the Source. 5. Next, select the Workspace and the Model that you want to move to this new Workspace and Click OK 6. A message box will prompt once the import is complete. Note: If there are integrations that are set on the model that you are moving to another workspace, since the Workspace ID and Model ID would have changes, you would want to change your pointers to make sure it's pointing to the correct Workspace and Model.

aashca9 · ‎07-23-2020

There are two options that I could think of to address your question, but I am not sure how quick they would be. 1. Anaplan has an "University Connect Program (Link: https://www.anaplan.com/university-connect/)" where in Anaplan can be introduced as part of your curriculum and you can actually get certified in it too. You would need to to get in touch with the Anaplan University team to see what the requirements are. I have provided the link above for more information. 2. Anaplan is planning to come up with a program for people who would like to go through these training and learn the application/model building; but are not currently their customer, partners, or employees. I am not sure when this is going to be live, but something that is in the pipeline for sure. Thank you, Aashca

aashca9 · ‎07-21-2020

Currently, you can not export any data out of Tenant Admin to perform any sort of analysis. It would be good to be able to export users, models, workspaces, etc. data out of Tenant Admin to perform analysis to address clean up activities.

aashca9 · ‎07-20-2020

It would be good to view the profile of the case owner and view his/her contact information, along with a way to chat with them directly on your case to get a prompt response, vs having to wait for a reply via an email that can take some time. In addition, it would be good if there was a way the user creating the case could raise the priority of the issue based on its criticality. For me, anytime I reach out to Anaplan support or create a case with them, it's always supercritical for my organization.

aashca9 · ‎06-30-2020

@Joh04924 I would say you are on the right path with "LOOKUP". Look at the mapping reference again, follow that exact sequence and check your logic. DEM02 --> SYS08 --->DEM03

aashca9 · ‎06-30-2020

@kunal_311 Total Column is a sum of all those columns (Hint: you need a formula there). You will not be importing data into the Total column. Makes sense?

aashca9 · ‎06-30-2020

Yes, you should be able to edit the name of the Module. Go to Modules and double click on the Module name you would like to edit. It will then highlight the name and you should be able to edit it.

aashca9 · ‎06-30-2020

What information, in particular, you are looking for? We have integrations built for data transfer between BW to Anaplan using REST APIs.

aashca9 · ‎06-30-2020

Thank you for all the responses. I was able to figure it out.

aashca9 · ‎06-30-2020

@hkitograd Below is the mapping you need to do...The second tab should be mapped automatically to all the locations. In the third tab, you should be loading the data to the specific column. Let me know if this works.

aashca9 · ‎06-30-2020

@stephen.hoffer In my experience we actually started implementing ALM with the most complex models due to some compliance requirement. It does involve a huge effort in identifying all the prod lists, actions, formulas reference in the modules, etc. But, I feel that with a proper approach using agile methodology and working on it as a project would be helpful. This was my approach when implementing ALM globally. I also had to think of all the training and knowledge transfer to all the teams/admins globally. However, based on your org requirement you can decide what would be a better approach.

aashca9 · ‎06-30-2020

I was able to figure it out.

aashca9 · ‎06-30-2020

I was able to figure it out. Thanks for your response @einas.ibrahim.

aashca9 · ‎06-28-2020

Beginning Inventory Formula: IF 'SYS01 Time Settings By Week'.'Not 1st Week of Timescale?' = TRUE THEN PREVIOUS (Ending Inventory) ELSE 'DAT01 Beginning Inventory'.Beginning Inventory[LOOKUP: 'SYS08 SKU Details'.Distribution Center]----Does this not look correct? not sure what I am doing wrong here.

aashca9 · ‎06-28-2020

Override Amount – Write: IF 'INV01 Inventory Ordering'.Override Suggested Order Amount = TRUE AND 'INV01 Inventory Ordering'.Submit Purchase Order Request = TRUE THEN TRUE ELSE FALSE ----Does this not look correct?

aashca9 · ‎06-28-2020

Hello, I am not sure what is wrong here: Beginning Inventory Formula: IF 'SYS01 Time Settings By Week'.'Not 1st Week of Timescale?' = TRUE THEN PREVIOUS (Ending Inventory) ELSE 'DAT01 Beginning Inventory'.Beginning Inventory[LOOKUP: 'SYS08 SKU Details'.Distribution Center]----Does this not look correct? Any help is greatly appreciated.

aashca9 · ‎04-05-2020

In addition, to completing the task, make sure to click all the boxes to see whether it requires you to read through it or not.

aashca9 · ‎03-05-2020

One more thing I'll add, in the same formula you'd need to know each of the employees role, dept, and based on that you'll need to fetch their benefits $$ from the employee drivers by role module.

aashca9 · ‎03-05-2020

Hello, Here you need to reference the Module "employee Drivers by Role" to get their bonus, benefits, etc. based on each of the employees' role. I am not sure how else to say it without giving out the actual answer.

aashca9 · ‎03-03-2020

One more thing I would mentioned is to make sure that your "Configure" tab looks like the one I attached. I see your list and I don't see a roll up.

aashca9 · ‎03-03-2020

Based on your image, I see that the Parent column in empty. I would just add "All Roles" to the Parent field for all the line items.

aashca9 · ‎03-03-2020

What do you see in your "Role" list? Does it contain "Parent" and "Code"?

aashca9 · ‎06-24-2019

Hi @Manuela_Apostol I did reach out to Anaplan support, and they said a deleted model can not be restored. So, was not sure if anyone had been in a similar situation and what did they do to recover the deleted model. Thank you, Aashca

aashca9 · ‎06-24-2019

How to restore a deleted Model?

aashca9 · ‎06-27-2018