-
Remove Selective Access for a module
We encountered a situation where we had selective Access enabled for Regions. A user had following access: Region 1 - Write Region 2 - Write Region 3 - Read Region 4- Read Region 5 - Write. We had to create a boolean filter on Regions. Since, the user has only read access to Region 3 and 4, he could not set the filter for…
-
Selective Summaries: Set Summary individually for each dimension
Sometimes, it's the case that we do not need summaries for all dimensions that are applied to a module - I might need calculations to happen for all intersections applicable for the dimensions applied but need roll up only for one of the dimensions which is currently achieved by creating a separate module at higher level…
-
Enable cards from multiple models within the new UX app
Enable cards from multiple models within the new UX app. Currently you can add multiple models to a page, but when you add cards sourced from different models you have to toggle to that model at the selector. After creating the cards, you have to toggle to this modal at the top otherwise the data is killed as per the…
-
Setting to restict user from selecting list items multiple times
In some scenarios, where you need the user to map a list item with another list item (one to one mapping), it would be useful to have an Anaplan setting that restricts the user to select a list item only once in the field. Currently, you need to add some manual check to make sure that each item is mapped only once.
-
New UX for modeling: refresh dashboard button for classic
As users move to the new interface also for classic dashboards, the "refresh" button becomes even harder to access. Now you have to right click on the tab name to open the tool bar, where the refresh button is. I know that classic dashboards are no longer priority, but this new interface makes it slightly worse to deal…
-
New UX for modeling: Switch between models and keep the module/list tabs open
When using the new navigation bar to switch between models, it would be great if Anaplan can keep the tabs for modules / lists that you have open already. Of course with a time stamp on it, maybe 30min or 1h. So if you go back to that model later, the same modules / lists would already be opened. Ideally also with the…
-
New UX for modeling: Dragging column width in modeling screens
Ability to drag the columns to be bigger or smaller on modeling screens, such as blueprint view but also the settings pages (modules, actions, etc). That's especially useful for the second tab "Imports" on the Actions setting page. It's currently impossible to read the content when we use saved views, and there's no…
-
New UX for modeling: Formula tips
In the new formula editor, it would be great if we could get formula tips, similar to excel that gives you a cheat-sheet of what arguments are needed and in what order. So instead of having to open an Anapedia page everytime to remember the order of the functions I use left often, this would pop up when I start typing in…
-
Format Column for List Formatted Line Item in Module Blueprint Export
When we export module blueprint to a file, list formatted line item has the list ID as value in the Format column instead of the name of the list itself. It will be useful if the list name is also added so that the exact list used by a specific line item can be known more easily without referring back to Anaplan blueprint.
-
Open the saved view if you save a view
When creating a saved view, it will not open by default, but you need to open the saved view in order to finetune it. It will benefit the model builders, because now a lot of times you create a saved view and you need to remember to open it again before making more changes to the view and continue saving. A lot of times…
-
Enable placement (Before, After, Top, Bottom) of new module upon Insert of module.
Similar to the drop down list when adding a new member to a list, it would reduce steps if I could add the new module to the Bottom of the display or After a selected module. In order to list modules sequentially, eg. SYS01, SYS02, SYS03, I must insert the module, then go back to the modules list and Reorder.
-
TEXTLIST over USER-list
Hi all, They TEXTLIST-function isn't allowed over the USER-list while this would be helpful in some cases. Can this be altered? All the best,
-
Search Actions in the New Modelling Experience
Hi Team The new modelling experience is great, giving a fresh feel to the design. I like the search option centralized as i don't have to do many clicks. Currently it has Modules, Dashboards and Lists. Can you include Actions too ? Thanks Kudi
-
Filter what appears in the dropdown for a list-formatted line item with a boolean
Current state Currently, you can filter a list using the "Selective access" and "Dependent" checkboxes when you go to the Format property of a line item, or you can create a list subset. It may happen that you want to have more control over what appears in the list than the checkboxes allow... but applying a subset comes…
-
Add properties to line item subset
Description of the enhancement required: Add List Properties for Line items subset and a full menu (like ordinary Lists have). Currently there is only one “Description” property available An example of the enhancement: Adding properties section for a line item subset would allow the business to store non numeric…
-
Allow filters across multiple line item formats
I need to be able to apply a filter to my line items to show any line that is blank regardless of format. Currently if I use >0 it will hide all lines with text formatting. The ability to add 2 filters for is not blank or is >0 would also be an acceptable solution
-
Manage Pre-Allocation in List/Config
I read a good article on LinkedIn by our colleague Mark Warren. It was about Pre-Allocation for avoiding model saves. Model saves may have impact on performance. Please see the LinkedIn post: https://www.linkedin.com/posts/mark-warren-45649ab_reducing-saves-in-data-hubs-activity-6796397489789399040-uGOR The led me to the…
-
List Formatted Items Dependent Dropdown based on a Module Line item
Currently the only way to define a dependency for a list formatted item is to use a List Property or its natural parentage. I would like to maintain this relationship in a module rather on a list property as recommended in the current best practice guidance.
-
Limit user entry for Dependent formatted line item
Currently if you format a line item as a Dependent list, the user gets a dropdown of list items that correspond to dependent criteria, same applies if they are typing the value. However it is possible to copy a name of a list item that is in the list (but does not suit dependent criteria) and paste it without getting an…
-
Make the Roles->Lists Section Uneditable if the List is Structural List
We Know that the Roles->Lists Section need to be checked when there is a need for an end user to edit the list and the list here would mean Production List. Idea I am proposing is to lock down the Roles->Lists enabling feature for all Structural Lists so that WSA's don't get the option of enabling it. This way Anaplan will…
-
Merged: User List Subsets Based on Role
This discussion has been merged.
-
Organize Subsets when Changing Applies To Section in Blueprint mode
As a user, it would be nice to have the subsets indented under their parent lists when changing the applies to section in a module blueprint mode. This organization would mirror the same organization shown when adding dimensions in the initial module creation. This would decrease the time spent finding a subset, especially…
-
Power Function Update
POWER function is unable to calculate all equations correctly. Cube root of '-8' is '-2' But when I tried the "POWER(-8, 1 / 3)" calculation, it resulted as "NaN" (shown in Image)
-
Shared weeks (splited by months)
We use ISO calendar split. This mean that a year contains about 52 calendart week and about 63 shared weeks: when a week is located in two months at the same time. This is the only way to move back and forth between Months and Weeks. Currently we have to maintain false Time hierarchy in order to have this option.
-
Set the Export File Name at the time of Export
Hi when running a Data Export I would like to be able to choose what the file name should be when exporting the file via a prompt. In an ideal world I would like to be able to decide on a prefix and suffix for the file name. With one of the options either being the date/time or the value I set in a module. One of my…
-
Allow ISFIRSTOCCURRENCE to search against time
IFO returns true for the first occurence of a value against a specific list formatted dimension. i would like the possibility to validate against the time dimension as well.
-
Publish Modules/Actions to Dashboard
Hi Team, Can we have the ability to search the existing dashboards when we try to publish a Module/Process/Action. Currently we have to scroll and search for the existing dashboards while publishing. Thanks Sathya
-
Anaplan Workspace, Model, Module, and Line Item Performance Planner
Some customers would like to have an Anaplan Platform feature to determine the resource utilization by a Model and Workspace from the Anaplan server-side: a tool that could show the specific amount of resources consumed by each line item and module. According to the same customers, that feature could show graphic and data…
-
Ignore blank dates for MIN calculations
I'd like Anaplan to ignore blank dates when performing MIN calculations: MIN, x[MIN:y], and MIN as a summary function. For numbers, I can see why 0 is evaluated since sometimes those are true zeroes, but for dates this makes much less sense. With dates, I would want the MIN calculations to return blank only if all of the…
-
Add Automated Line Item Reference if a Field is used in an Import/Export action
It would be extremely beneficial and time saving if you could add a reference to a line item that states if it is being used in any import or export action and what that action is. This would be similar to if a line item is used in another line item or module.