-
Anaplan may want to address this issue with lesson 2.4.10
The suggested extra learning pages no longer link through to the information. This might go back to the last major upgrade in 2022. They go to a page not found message. Thanks, MPW
-
3.3.7.2 Add DCA to INV01 Inventory Ordering - Level 2 Sprint 3
The hint for this module is below: Below is my work: My formula is different than what the module hint suggested and was wondering if it still works. For simplicity in my explanation I will name each line A-E A. Submit Purchase Order Request? B. Override Suggested Order Amount? C. Override Amount D. Override Shipping…
-
Anaplan Pre Sale Certificate training
Who can sharing me, how to get officially training certificate for Pre Sale of Anaplan training? I 'm represent of your Partner.
-
3 5 5 activity create distribution center summary ux page
Hi y'all, I need help creating the Product SKU by Distribution Center grid for this activity. I can't can't figure out what module to use or how to pivot it to get these results. Any help would be greatly appreciated.
-
Import Data - Ignored issue
Hi there, I'm trying to import data from a source. It looks good and says 'Success! The import is complete.' However, it ignored all the data I had. Please see the attaches. Maybe it's easy to handle but I couldn't catch it. Does anyone guide me? Please see the attaches. Thanks, Mark
-
3.3.5.5 Update Inventory Ordering to Allow Override of Shipping Method
Hi All, I need some help here regarding the Final Shipping Time in Weeks and Final Shipping Method Graphics attached. When I run this using the default position of Road and a 2 week delivery time it works fin, irrespective of the week I place the order. However, when I choose to Override Shipping Method, pick, say, Air…
-
13.6.4 13.6.4 Activity: Add Line Chart to Margin Summary Page
Hi, For 13.6.4 L1 Model building I am getting my UX page like below, Please guide me to correct this. Model Building Answer Regards, Aslam
-
what is the difference of classic UX and new UX
-
Sprint 3: Supply Chain :P3 SKU No data
Hi all I'm at the start of Sprint 3, but my Supply Chain module seem to have lost data in the P3 SKU list, which is blocking me for going forward. P3 list does seem to be populated: However, every module with P3 SKU in the dimensions has been cleared out: Does this have to do with any restriction settings I put? I tried…
-
Data Not Importing - 8.5.3 Activity : Import Data Into Volume Input Module
Hi Folks, I am currently on this Lesson in the Anaplan course. Data is not importing from the Volumes + Imports.CSV that I have download. I can see what I believe is the problem. The dates on the .CSV file are for 2019, where in my model they are for 2023. I assume I can just adjust the dates on the .CSV file to match the…
-
Doubts regarding Anaplan L1,L2 and Anaplan way
Dear Team, I am a new joiner in Anaplan, I want to learn Anaplan and start my career into Anaplan. I need Anaplan trial workspace for my L1 and L2 Certifications but its showing first should learn Anaplan way then only trial workspace will be given by anaplan team, so I am confussed, first what should learn . so please do…
-
Talent Builder Independent Page Builder Role
I would like to ask if Talent Builder Independent members are allowed to have Page Builder Role and Access to creating apps? I am now at Level 2 Model Building Sprint 2 and I cannot create an app on my workspace, only creating pages via My Pages. I am assuming that we do not have Page Builder Roles. Is this intentional or…
-
9.2.5 Activity: Add Formulas to Price Growth Rates Staging Module
I am trying to add the below formula to the line item (Unit Price %) in the REV05 Price Growth Rates Staging module and I keep getting the an error message 'REV04 Price Growth Rates'.Unit Price%[LOOKUP: 'SYS04 Location Details'.Country, LOOKUP: 'SYS06 Product Details'.Product Family] The error message I am receiving is…
-
level 1 model building exam I am unable to update an import
-
L2 Conclusion - REP05 Local Currency
Is there any issue with the formula for Local Currency? - Although it's fetching the correct result, want to check if there is anything else I'm missing. regards Sudhir
-
Level 3 Sprint 2 6.4 Max Accounts
What does Max Accounts mean in this exercise?
-
Level 2 Sprint 3 3.3.5.2A Beginning Inventory, Forecast Demand, and Suggested Order Line Items
I am using this formula 'DEM03 Demand Forecast'.Final Forecast to pull final demand forecast value, but I am not getting any values.
-
Lvl 2 Sprint 2 - 2.3.8.2 Import into DEM01 Module
Hi, I am on Level 2 Sprint 2 - 2.3.8 Activity: Volume Growth Rates - 2.3.8.2 Import into DEM01 Module. I created the module and imported the Growth% data into it. But noticed that "Growth%" is showing in both line items as well as an item in the P1 Product Family List. I had added it to line items as per the instructions,…
-
L2 1.5.6 Historic Volume Model - Import Error
Hi All, I've been reading up on the forum and I have followed most of the advice given but I still seem to have an issue importing data into DAT03 Historic Volumes. The data seems to be ignored when I import. Has anyone else had this issue? I don't believe it is mapping related as SKU, Account and Week all work properly on…
-
3.3.5.3 Check Your Work - issue with beginning inventory numbers - can anyone please help!
Hi, my numbers on beginning inventory aren't changing from 13,000 below - Sharing the relevant screenshot incl SYS01 Time Settings By Week - any help would appreciated as why the numbers from beginning inventory are getting referenced prroperly… Also, to add, when I'm changing the formula to IF (…) from IF NOT (..)…
-
3.3.5.2A Beginning Inventory, Forecast Demand, and Suggested Order Line Items
I have completely cleared the Override? Boolean but now I am unable to reselect the checkbox for Nutzo Bar_EN, Candyate, Week 2 FY20. Can someone please help me with this?
-
3.3.5.3 Check Your Work
Hello, My numbers seem a little off anything you can suggest ? (last screenshot)
-
Share a Tableau dashboard built on server with a Tableau Cloud user
We have a mixed set of licenses at my organization: some of use are on Tableau Server, others are on Tableau Cloud. I am having difficulty figuring out how to share a dashboard I made in Tableau Server with a user who only has Tableau Cloud access. I have been told this is possible but have yet to find any documentation…
-
3.3.5.3 Check Your Work - All Products not showing
I am in the INV01 Inventory Ordering Module, and for some reason, the All Products isn't showing in the drop down - it's only by Product Family. In the P3 SKU list in the Data Hub, you can see that the parent hierarchy is correct - or at least it seems to be. I've also checked the imports again to make sure parent was…
-
Anaplan level 1 lesson 12
How do I do Create Forecast Periods Saved View? In the model, open the OTH01 Non Employee Expenses module. Create a new saved view: Filter: Forecast Months only Save and name the view: Forecast Periods Can somebody help me with this?
-
Some kind of Bug in model of Anaplan Essential Course for Customer
Hi Community, One of my client users is taking Essential course and notified an issue he got while importing date into transactional data module. See the screenshot below When he clicked to open dropdown to select "Language for month names" (his laptop language setting is Chinese), the mapping window here will collapse and…
-
Hello! Is possible to restrict users with Admin access from updating a list subset?
-
Regarding Workspace Access
Hi Team I had raised request for workspace access but got declined mail. I have completed The Anaplan way course and received certification also but still received decline mail. What can I do? How can I get access? And also I am first time user and have not used workspace priorly. Even after sending mail to…
-
Create Shipping Export Module and Create a Saved View
Hi, I am unable to compile the data at month level. As soon as I change the timescale formula to monthly it shows the subsidiary view icon against line items, yet does not change it to monthly view in grid. Please suggest what's going incorrect here..
-
2.3.10 Activity: Create Demand Forecast
Hi, Can anyone please help me urgent , I stuck since long read many article on community , cross checked everything still the Default forcast is not matching with Anaplan answer . for question : In the DEM03 Demand Forecast module that you just created, what is the Default Forecast in Week 6 FY21 for Nutzo Bar_EN in the…