-
Level 2 Supply Chain Time Settings
Hi all, I'm having some issues with the time settings on my L2 supply chain model, although it's only just starting to affect my work when I started on activity 2.3.9. For example, here is what my DEM03 module is showing, once I have all the formulas in: I think this is coming from an issue in SYS01, which currently looks…
-
Anaplan Case Number: 00435262
Dear Anaplan Team, Kindly activate my 90 days subscription requested, on 1st Aug 2022 at the earliest. Awaiting response. Regards, Pradeep Hebballi
-
View designer does not show on my card configuration
Hello community, I am stuck at 3.3.12, level 2 because I don't see "View designer" option from 3.3.9 lesson. I'll we really grateful for any help.
-
Invo5 shipping costs
The above image show what has to be done I have attach the data i am getting for shipping cost is wrong I am not able to rectify please help me out what i have done wrong .
-
INV05 Data
For some reason my data from shipping cost is not populating. I went back and checked all the formulas from INV01 and they look accurate. What could be wrong? @JaredDolich
-
MB 1 13 6 4 and 13 6 5
Community, Working through MB 1- on lesson 13 now to set up UX pages. The results of my first attempt at a Volume Chart, followed by Margin Chart result in something not desired. The line graphs follow along the periods then comes the full year values. The full year values make the visualization unusable from an end user…
-
INV01 Level2
I have attached screenshot ,what booleans I must have checked in INV01 so that my module will be ready for further calaculatons or whatever changes I should made in this module to make it calculation ready.
-
Level 2 Sprint 3 3.3.7.2 Add DCA to INV01 Inventory Ordering
Almost completed the work Just confused regarding my work plz suggest if I am wrong 1. Should I use "Submit Purchase Order Request" line item as formula in AD02 Inventory Ordering for Overrides "Submit Purchase Order - Write? " OR 2. Should I use line item "Submit Purchase Order - Write? " from AD02 Inventory Ordering…
-
Time Schedule for self-learners
Hi everyone, I am a self learner for MB 1&2. Has been about 2 months and because of my daily things I am not sure I will finish on time(90 day ). Is there any possibility to re-schedule? Thx in advance.
-
Classic Dashboard - What does this mean ?
Dear Community Members, I am on MB Lesson 12. I have noticed the phrase "........ on a Classic Dashboard or a UX Page" is mentioned frequently in the lessons. I may have missed it from a previous lesson, but I do not understand what the "Classic Dashboard" refers to. Does this refer to the overall Anaplan Platform…
-
The Filter is gone if left unchecked on Product Replenishment UX Page
In Level 2 Model Building 3.3.12 Activity: Create Product Replenishment UX Page, I should've make a page similar to this prototype: This is the screenshot of the UX Page that I've made: If you take a look, 'Planning Period Planning' grid only show us the checked months (Jan and Feb). It used to show all the months, but…
-
Check your Work png file not showing the answers in MB1 lesson 8 and lesson 9 (so far)
I am working on MB1 lesson 9 now. In the previous lesson (8) and in this lesson so far, the png. files to "check your work" after each activity are not working. In all previous lessons (1-7) I could check my work. Is anyone else experiencing this issue? Maybe it is a bug with the training material. Does anyone have an idea…
-
Is Something Wrong With my Role List? Level 1
Hi, So while trying to update my Emp02 Employee Expenses module calculations for bonus, car costs, phone costs and medical costs to reference Emp03 Employee Drivers by Role module, I get this error: "Invalid error for 'EMP02 Employee Expenses'.Bonus: Automatic sum of 'EMP03 Employee Drivers by Role'.Bonus % over Role…
-
Issue with changing source model
Hello, I am currently following the Level 2 - Model Building Sprint 2. I had to change the source model to the Data Hub created during Sprint 1. Unfortunately, the name of the source didn't change when I clicked on "Edit Mapping" but just added the details in "Mapped to". When I followed the next steps to populate data…
-
MB 1 Activity 11 3 3 Check your work Error (I think)
Working through MB1 11 3 3 I believe the "Check your Work" reference has an error. Looking for a confirmation from experienced Community Member. The activity required that we Set Style Setting to Summary 2 for the Other Costs Line. I would expect that line to be Bold/Indent like that other Summary 2 Style Formatted line…
-
Data not matching In inv01 inventory ordering
I am stuck on this module from last 2 day but not getting how to get data correct my formule are correct The image for data what i have got is below
-
Create Distribution Center Summary UX
Hi Team. I'm not able to set conditional formatting like for the value of 80% green and around 100 red and also i need to ask are the values feasible in the Distribution center capacity module.
-
3 3 12 activity create product replenishment ux page conditional formatting
conditional formatting is not working in UX page using the max middle and min criterion even in module its not working. How can I make it possible in this case * Add conditional formatting to display Confirmed Purchase Order Receipt as green any time the value is greater than 0. * Add conditional formatting to display…
-
Level 3 - Technical Exam
Hi All, My model works fine when i compare the data with "Check your build". However when I enter the answers for the exam the answers are incorrect. I uploaded all the prerequisites. Also checked the Accounts> Product check too. Still it gives me incorrect value.
-
Activity 3.3.5.2
Hi Team, Please assist me with this. After inserting my formulae, I noticed a difference in value in my Suggested Order amount. My value is 8192, the screenshot has 8194. I am also attaching the formulae in my line items so you can guide me What am i missing
-
Country System Module
Hi Team, I want to ask the Q that on what grounds is the mapping happening Like P3 SKU and G2 country should have the same dimensionality in accordance to Sum fn like we used the systems module to create a list formatted line item? can we do so in all the cases ?
-
Data not matching
This is the desired output the image below is one i got after completing inv01 inventory ordering i have error in 1. Ending inventory data for week3 and week 4 2. Shipping cost 3. Final shipping cost 4. Shipping cost variance Please help me
-
Create Product Replenishment Page
I want to understand the relation of the Planning Period Filter for months relation to the INV ordering module and how the data changes
-
Number of cells count conclusion exam
Hello everyone. I have successfully completed my module builder certification training. There was question during the exam that I was not able to resolve. This was related to the cell count for the export model to transfer the final demand from the supply chain model onto the FP&A model: This is the formula I used to pull…
-
Import Error
How to resolved this error.? I have attached screenshot.
-
Data error
the above image is in the lesson which we have to do This Thsi image The above image is what i have done after applying all formula and thus table matches the first table of first image but as soon as i made summary changes all value i get are wrong when i choose for the All products in page selector . The data i get is *
-
level2 3.3.5.2 Confirmed PO Delivery formulas
POST(PO Submitted, Shipping Time Weeks) worked in Confirmed PO Delivery Formula.OFFSET(PO Submitted, Shipping Time Weeks, 0) is right according to the hint in the module but it is giving wrong results as adding value in the current and 2 weeks ago column not filling the value in after two weeks.added a screenshot. Plz…
-
User access for demand account manager
Please help me to figure out that is it correct for demand account manager . I am not getting it
-
8 5 2 Activity L1 Model Build Import Data to Price Book Module
The Mapping Screen for the import looks different than what was shown in the lesson. I do not know how/where I have set up the module incorrectly so that I don't end up with the correct options for mapping the import. I have attached a screenshot of the (incorrect) mapping options I have - no tabs available. I also…
-
Level 1 Lesson 8.5.2 Mapping Options I have are not correct _ not matching the lesson plan
When I try to import data into REV01 Price Book and come to the Mapping dialog, what I see is not matching what was shown in the lesson plan. I have uploaded a picture of my incorrect view as well as a picture from the lesson plan. Can someone help me figure out where I have gone wrong in the set up?
