-
Anaplan Data Export using Cloud ETL - Snaplogic
As per the Business requirement, need to export the data from Anaplan (Not Manual). To define this, we used Snaplogic cloud tool to extract the data and do data manipulation by using Anaplan Read Snap. We can configure this Anaplan read snap in two ways 1. Basic Auth 2. Certificate + Keys based on above information, we can…
-
Filter on Imports
An option to filter on imports would be a nice to have feature. That way model builders will have an option to pre-process data instead of making a process to prepare the data after importing to list.
-
CloudWorks custom load calendar
Suggest to add ability in Cloudworks to create custom load calendars. Not all data integration loads follow a recurring pattern but are instead based on custom load dates. Adding ability to e.g. specify a specific load calendar for the next 12-18 months will ensure load dates are aligned with business processes and reduce…
-
Mapping Options for Module Import
When uploading a CSV a few more options about whether specific columns can be ignored or manually mapped (in a similar way to how imports to lists work)
-
NUX Export Labels
In the current UX, you can include property labels when exporting. I would like this feature to be available in NUX as well.
-
Ability to automate exports to PDF
As a model builder I want specific export to PDF to be saved in the list of exports so that a process can be created to group them together and run specific export to PDFs from dashboards in one go. I will know this is successful when I will be able to create a process and group a series of PDF exports together, which can…
-
File Import Issue due to Control Panel Local Language Setting
Some users in Europe are facing issues importing offline excel file into Anaplan. Currently we have a workaround for this issue. If user changes his Format setting in Region and Language to “English”, then the upload is successful to Anaplan. Users have to change their local language setting every time they need to upload…
-
Paste more than 10,000 cells
The limit of only being able to paste 10,000 cells is too small. Ideally it would be 100,000 to cater for larger data sets
-
Refresh Function in Excel Add-in should provide option to submit changes
Description: If a user changes data in a read/write view of data in Excel via the Anaplan Excel Add-in and then subsequently clicks on the "refresh" button, the Anaplan interface does not inform the user of any changes that have been made to the data before the view is refreshed. This results in any changes being cleared…
-
Excel add-in, Date time settings
Excel Add-In error: Refresh failed due to unexpected error. Found out that when the Excel template is created with Regional settings [ ex. decimal symbol as Dot / . ] is different from your system settings [ ex. Decimal symbol Comma / , ] then the refresh fails and shows up unexpected error. This is solved as soon as the…
-
Batch printing, exporting, emailing of NUX dashboards and worksheets
Description: As an Anaplan user, I would like to be able to print, export, or email Dashboards and/or Worksheets in the New UX based on a selection of list items relevant to the the Board/Worksheet. This process should be able to be scheduled (e.g. daily, weekly, monthy at a set time) or run on-demand by the user. The user…
-
Export multiple modules into unique file
As a Model Builder I want to create a Process to trigger multiple Export actions at once, each export linked to a different module. However, the Process generates as many files (csv, Excel, txt,...) as the number of Export Actions within the Process. It would be better if the Process could generate a single file (CSV,…
-
Run export from source model to target model
At the moment in order to transfer data between models manually it is required to open the target model and pull/import the data from there. Having the additional functionality of running an export from the source model to the target (pushing the data instead of pulling it) would enhance the user experience in some…
-
Excel Add-In: Possibility to display name or code for list members
I would like to have the possibility to extract different attributes for a list member in the worksheet via Excel Add-In (rather than just the name), in the same way the direct export from Anaplan allows: display name, code, parent, etc. Few examples where I find this functionality useful: reconciliation process after a…
-
Data Tags as a comment feature for developers
Hi team, As a Model Builder and BAU Support Team Specialist, I am interested in documenting enhancements in our models. Using only the Notes feature as a commenting tool, it is getting really hard to track them all after a couple of years of the model being rolled out. At some level of complexity of the model, it is…
-
Creating a version with import action - access settings
Hi, When manually adding versions, you have the option to select access setting. By default, it is Write. See photo below. However, if you try to create a new version via import action, you can't specify the access setting. The new version created, has by default No Access. I wanted to automate the version creation using…
-
Simultaneous processing (multi-threading) of Anaplan actions
As a user and/or model builder, I want to be able to run actions simultaneously where possible to speed up the data processing and list maintenance actions. This function should also allow other actions to be run only after certain actions have finished running successfully. As an example, if I want to load trial balance…
-
add processId, actionId, fileId as columns in Settings (for API development)
This will speed up API development and runtime both. The API requires ID's as parameter, however Anaplan UI shows only the Name. When using API for sending data to Anaplan or triggering a process we now use the name for searching the id. Currently this requires additional looping in our API framework. If we know from the…
-
Default Export File Type to CSV
This one is simple. Anaplan's recommended export file type is CSV, yet the export dialog defaults to Excel / XLS. Yesterday we had an integration mysteriously run for 7 hours, later realizing it was because the export file type wasn't changed to CSV. Please allow model admin to set the default export file type to CSV. This…
-
Excel Add In - Add Properties Similar to Labels Tab when exporting out of Anaplan
It would be great if you could add properties in the excel add in, similar to how when you export from Anaplan you can add properties from the underlying list using the labels tab.
-
Excel Add-In - Remap
When using the Remap feature, if you select a view that doesn't match the original structure, it should give an error instead of crashing excel. The error message was available in 2.x and is not working in 4.0
-
MSP requirement for tenant integration
MSP partners require the capability for a workspace in Tenant A to read & write directly to a different workspace in Tenant A or B. 1.Must go beyond the functional capability to do imports between WS within the same tenant. 2.A .csv export from a WS in tenant A and import into WS in tenant B is too cumbersome 3.Maybe Hyper…
-
Print as wysiwyg
What you see is what you get (wysiwyg) is a common feature in most reporting tools and a fair request. Currently when we try to export through classic or new UX (as PDF), what we get is far from what we see. This greatly reduces the application of some of our modules as we cannot create PDFs and forward it to higher ups…
-
NUX: Model to Model Import Actions Show Incorrect Results
Backdrop: I have a process containing an import action from data hub to spoke model that populates spoke model list members. Let's say there are 5 members in my spoke model list and there are currently no changes in my source data. Given there are no changes in data, a. The import process when run from 'Actions' tab shows…
-
New UX needs to have a multi-lingual user interface to allow non-english language implementations
Hi Anaplan, The New UX does not currently support a multi-lingual interface. Many of our clients are asking for this to be implemented. It would be really beneficial for many Anaplan Users across the world (Europe, Asia, Africa, South America) for the new UX and UI to support a multi-lingual interface. Great idea suggested…
-
Print Modules/Dashboards Directly from Anaplan
My users want to be able to print directly from Anaplan (without exporting).
-
Ability to include a timestamp on exported XLS files
Description of the enhancement required: Date Time Stamp as data field in the exported file (accurate to DDMMYYYY HHMMSS) An example of the enhancement: Formula which captures the current system time at time of export would be highly appreciated. How would it help the business process: The customer server would be able to…
-
Import Action Categories and Separators
The import action management section often becomes messy because ALL import actions are saved. Would love the ability to create sections and separators, to better organize the import actions I intend to repeat. The following example was created from dummy imports, but it would be great if this feature were built in. I…
-
Local settings for .csv imports - Booleans
Hello, I faced a problem when importing boolean values to anaplan as part of csv file. Our company uses localized version of MS Excel, which when saving a file containing boolean values to text/csv, keeps them not as TRUE or FALSE, but as local equivalents ИСТИНА and ЛОЖЬ. I can try to change my own excel settings, so I…
-
Default subset setting
Suggest to add ability for model builder to change the default setting for list subsets. I.e. add option to select whether a subset setting should be true or false for any new list items added. This will make it easier and more flexible to work with subsets, and help avoid having to create a dummy module and action to…