-
Allow model builders to differentiate models by changing the color of the "Anaplan" blue header bar
We have many different models our team of builders uses, all of which have a slightly different name, but sometimes that's not exactly obvious if one is working in the Revision 1 model, or the Revision 2 model, Staging, or Production etc. I would like the ability to alter the color of the blue anaplan header bar so that I…
-
Copy Conditional Formatting Rules Across Multiple Line Items
One request I get from users is adding conditional formatting. A lot of times users want a standard color in cells that allow input. Creating rules for multiple line items is often times cumbersome, so I would like the ability to easily apply a rule across multiple line items. For example, one UX card has three input line…
-
'Not Between' Filter in the UX Grid Card configuration
We often use filter to remove small numbers eg less than -$100k and greater than $100k but to do this we have to do 2 filters which is not ideal / best practice. Are we able to add Not Between in the UX Filter so we can only do 1 filter for each grid. Thanks.
-
Change individually the colour of the chart series even with 2 dimension/list (nested charts)
Ability to change individually the colour of the chart series even with 2 dimensions/list. For example we have Product + Country as the 2 dimension/list in the rows and Time Period in the columns. We can change the colour for different products but not the combination of Product + Country. In the example attached, we have…
-
Option to add multiple models in App[Multisource App] at one go.
Hi Team, Currently, We are using a multi-app set-up (Dev, Test, Prod) for our UX apps to a single app enable with multiple source models. But we need to go page by page and add the multiple models. It's very time consuming process cause if we have around 40-50 pages , we need to do one by one. It is better to have option…
-
NUX Pages Visibility and Editability
AS IS: If a NUX page is associated with only one model, the page will disappear when the model is archived or deleted. TO BE: The NUX page must remain visible, accessible for viewing and editing, even if the linked model is archived or deleted, so that you can link the page to another model, read the text blocks, check the…
-
Better Warnings
When you go to delete a Page, it just asks "Do you want to delete this page?" It would be helpful if it reiterated which page you are about to delete, so that if I accidentally clicked the wrong page, I could catch that.
-
NUX - Vertical lines in designer view
For page builders it would be great to also have horizontal grid lines in the pages designer view. This would help to align the size of the cards not only in the width but also in height. This is especially helpful if you have a page with multiple text cards that are functioning as links to pages, or headers.
-
Auto refresh when apply filter and sync the rows in New UX
This is one of the major issues, In this the data is getting auto filtered for an instance User filtered based on employee name and as the updated the territory with another employee name it gets filtered out immediately as we click on the another row to update other changes. This auto filtering was not there in classic…
-
Filter Option on New Ux displaying complete list data when limited items are published on dashboards
When we apply filter on new ux it displays us with the complete list of items to be selected instead the ones showing on the dashboard. Also when we apply one filter on one column and try to apply another filter on the second one still it displays with the entire list instead of the limited items that got filtered out…
-
Ability to Limit End User Module Options
The NUX doesn't allow us to limit what end users have the ability to do like the Classic does. The option to Show History is a non-negotiable need to have in NUX before we can fully transition over from classic. Our largest model contains quite a bit of data and has 1k+ users interacting with it throughout the day / week.…
-
Adjust Column Height
For page builders, it would be nice to have the opportunity to adjust the column height within grids without having to adjust the size horizontally. Right now, this is only possible for row heights (medium, large, extra large). This would save us some white space and we could therefore show more valuable content in grids.
-
NUX - White space in grids with hierarchy lists
If a grid is dimensioned by a hierarchy list, but it is filtered so only the lowest level is shown, a lot of white space is visible on the list item level. The white space also doesn’t go away if the parent levels are deselected in the show / hide section of the custom view. The only possible way to get rid of the white…
-
Freeze Panes
Will it ever be possible to freeze panes like excel?
-
NUX Ability to Re-Size Drop Down Lists in Grids
Is there an ability to allow a user to resize a drop down list in grids? Currently it looks like it defaults to the size of the column, and when selecting a list item within a hierarchy, often the view of the item is obstructed and you have to scroll to see the item. We did notice that you can resize the column right…
-
Be able to format graphs
We should be able to easily format graphs in the UX without having to create a separate line item. (The same way we can with a card.) For example we should be able to format a graph by millions. (From 3,370,000 to 3.3M)
-
Filter window/panel should close when clicking "Apply"
Hej The Filter window/panel should close when clicking "Apply", rather than having to also click on the "X". As a user I want to apply several filters to a grid and then click "apply". With clcking "Apply" I expect the filter window to close, so that I can better view the data to which the filter was applied.
-
Improve Context Selector NUX
Hej, The context selectors should be improved in following ways As a User, I need the upper levels of a hierarchy in the Context selector to freeze when scrolling. This is so that I always can understand where inside the hierarchy I am when selecting the the item to display. As a User, I need the Font of upper levels of a…
-
Format Numeric Data in NUX and in Module
This is similar to the below but more blown out - I have a requirement to better format a View to enhance a viewer's experience in a specific order with specific formatting on a line item based off of a line item subset. Unfortunately, a singular Number line item cannot both be formatted to show 1000's and % at the same…
-
Count, Min, Max... should be visible even when discrete cells are selected
Quick calculations (Count, Min, Max, Average, Sum) are seen in Anaplan UX pages when selecting consecutive cells. But when discrete cells are selected, no values are shown. This leads to difficulty in analysing data. Just for the sake of adding up values in some discrete cells we have to use calculators.
-
Make Drill Down more user friendly
Quick calculations (Count, Min, Max, Average, Sum) available in Anaplan when selecting cells should also be made applicable while Drill Down via UX pages. Size of grids in drill down must be adjustable by users. Currently long grids are difficult to view.
-
Be able to insert a custom Homepage Banner/picture
It would be a neat feature to be able to have a custom banner och picture on the Homepage. In the same way as ACE is, please see attached. Here you could for example show important information, deadlines and news
-
Upload Image for NUX
Anaplan don't allow to upload images but there is the possibility to show them only with the use of links. This can indeed streamline the App but it can generate some problems where some clients have restrict web access in regards to websites that are visitable. It would be great to have the chance to upload image and -why…
-
Management Reporting - Styling improvements
This concerns specifically the desire to enhance Management Reporting support for additional font sizes, bold text (not limited to headers), support for bullets, additional presentation styling and adding simple shapes. There are some other overlapping Ideas already in Idea Exchange: * @erik.bangsund : you have a very…
-
Regarding Case: 00485851Reload of Anaplan Add-in Word/Excel/PowerPoint should land user to Home page
Current behavior of add-in is reload option land user to sign in page, which is not a good user experience, as due to current behavior user needs to again do the sign in process in oredr to navigate to Home Page of add-in, As per our suggestion it should be replaced with logic where reload lands user to same page which…
-
To have flexibility to adjust gap between modules in a Dashboard
My client will like to see te flexibility to adjust gap or removing whitespace between modules in a dashboard as they felt that there are too many white space in between modules in a dashboard. The benefit of that will improve the user experience especially if the user has a small screen size to view the dashboard (which…
-
Extending the number of cards to publish in Apps page
Suggest that the limit of publishing cards in Apps will be increased, to address the extensive reporting formats
-
Add the feature to hide "Copy Down" and "Copy Across" buttons
The buttons "Copy Down" and "Copy Across" are too dangerous for the users. A popup message, where the user can understand what it is going to happen and then confirm the copy, could be helpful. As it is, there is the risk to accidentally override a lot of data with just one click, especially in those cards where there are…
-
Allow more intuitive date input via keyboard
Description: As an end user, I want to be able to type in dates into date-formatted fields using a flexible and intuitive format, so that it is quicker and easier for me to enter required data into a model and allowing me to focus on the outputs, rather than having to spend additional time thinking through the format of my…
-
Show progress for full process in new UX
Suggest to show the general process progress in the new UX. In the classic UX, it is possible to see which specific action in the process chain is currently being processed. The new UX only shows the progress bar per process step but without any information at all about which step is currently being processed and it is…