L2 - Sprint 1 - 1.6.3.2 Import Data into DAT04 Distribution Center Parameters Module * Download data file: Weekly Safety Stock.csv. * Import data file into the DAT04 Distribution Center Parameters module. I am trying to do the mapping Distribution tab map is not coming properly Please help to resolve the issue . Regards, Srin

Level 2 - 1.6.3.2 Import Data into DAT04 Distribution Center Parameters Module

sp40684

L2 - Sprint 1 -

1.6.3.2 Import Data into DAT04 Distribution Center Parameters Module

Download data file: Weekly Safety Stock.csv.
Import data file into the DAT04 Distribution Center Parameters module.

I am trying to do the mapping

Distribution tab map is not coming properly

Please help to resolve the issue .

Regards,

Srin

Accepted answers

AntonMineev

Hi @sp40684!

You need to change the mapping for DAT to "Column Headers". After that, check the tabbing mapping again. You will need to map the header name to the LI in the module (if this does not happen automatically).

Снимок экрана 2022-01-11 в 08.21.01.png

All comments

AntonMineev

Hi @sp40684!

Снимок экрана 2022-01-11 в 08.21.01.png

sp40684

thanks and i have completed

sdasmasulthana

HI, I too tried many times now Got the solution for this.

First check all the things mentioned in creating module steps perfectly.

Then Please go for mapping like this

VineethaTarugu

Even after all the changes i am getting the following error

please guide Further

seymatas1

It is not throwing an error but is ignoring the columns it should import. The mapping @sdasmasulthana provided is correct. There should be another problem with time.
Can you check the time granularity of the module?

Sait

The above mapping is correct.

Can you check if there are numbers in your module?

VineethaTarugu

Thanks@ seymatas1 issue got resolved,

Had issue with time granularity.

CharlesD

Hi,

I have done the mapping exactly as indicated by @sdasmasulthana

And I have set the module time scale to half-year

However all imports are ignored, no data is loaded

Is there anything else I need to do to set the module time to half year ?

Any suggestion ?

seymatas1

Hi Charles,

Can you check if your Time, SKU Flat, and DAT04 Distribution Center Parameters Line Items tabs match?

Time Tab:

SKU Flat Tab:

DAT04 Distribution Center Parameters Line Items Tab:

If they don't match, you can "map items manually".

Let me know if this helps.

Seyma 🌷🙂

ulyssesfarias

https://community.anaplan.com/discussion/comment/171357#Comment_171357

You were facing the same issue that I faced.
Please check if the LINE ITEM Weekly Safety Stock has the TIME SCALE set for HALF-YEAR.

In my case, the module was set "half-year", but the line item was "week"

Quick Links

Can you help?

Unanswered questions

Module Information Visibility Restricted for Non‑Admin Users on Anaplan page
Why are non‑admin users unable to view Module information on the Anaplan page, while workspace administrators can? (After click the three dots on the grids right up corner) Are there any configuration options that allow non‑admin users to view module details without granting full workspace administrator access?
How to synchronize scroll a card/s from the main board and another card/s in the insights panel?
Just like the main question above, I wanted to try out the new feature on the board where you can you the insights panel to put additional cards. However, I wanted to synchronize scroll a card on the main board with the card on the insights panel but I can't find where it might be.
ADO connection from postgreSQL
Hi everyone, I am trying to create a connection ADO from PostgreSQL, but I consistently receive the following error: Failed to establish a connection The following message was sent from the target system: The SSL certificate is either invalid or not in unencrypted PEM format. Please check your certificate and try again.…