I am building email template for MAILTO formula. Is it possible to format the text (make bold, italic, colored) and create paragraphs in the emails' body? Maybe implement html tags?
@LHasanova,
I don't believe you can do bolds, italics, or colored, but you can have multi lines like paragraphs.
Create a Line item called Break without any dimensionality (or better yet, create this in its own module without dimensionality) with the formula being: " "
Create a line item named Removed Quotes with the formula: RIGHT(LEFT(break, 2), 1)
Create your 1st paragraph in a line item (Body line 1), your 2nd paragraph in a secod line item (Body Line 2), etc.
Create another line item named Full Body with the formula: 'Body Line 1' & Remove quotes & 'Line 2' & Remove quotes & 'Line 3'
In the last parameter of the MAILTO function, use the Full Body line item.
This should give you what you are looking for in regards to line breaks.
Hope this helps,
Rob
this is what the body of my mailto looks like:
but it should like this instead:
to make the link visible and clickable to the recipients.
Do we have any workarounds to do this?
Note: here is my mailto formula:
MAILTO("Send to Approver 1", " ", "", "", "Anaplan notification", "https://us2a.app.anaplan.com/core10145/anaplan/framework.jsp?selectedWorkspaceId=8a81b00e67191af001672d4db52616de&selectedModelId=2EB5EDD76EF64A668505BEC98CC32A5F")
Thank you so much!
Best regards,
Sarah
@SarahE ,
I would check the format of the email, whether the default is in HTML or Text.
Hi Rob,
Your solution is not working to me. Quick questions:
Thanks in advance for your help.
Regards,
Ramiro
@rodriguezramiro ,
Care to attach some pictures to help figure out what is going on?
Thanks,
Sure! Here you go some pictures. The line items I'm using are "Body", "break" and "MAILTO" ("Body 2" and "MAILTO2" are for an alternative solution I found in the Community).
Blueprint
Regular View
Resulting Email
Thank you.
I think the issue is in your break and break_aux line items.
Break should not be a subsidiary view, but fully dimensioned by what you have in the Applies To for the module:
Break_aux should not be a formula of " ", but that should be entered as the text. Take a look at the below:
Which produced:
Rob,
Thanks for the quick answer. I did the changes, but it's still not working (same result). Please, find new screenshots below:
Thanks again.
On the Break, you don't enter " ", but rather " shift return (on the Mac -> Control + Option + Return)
@rodriguezramiro
Did you get it working?
@rob_marshall
I'm attempting to reproduce this line break line item, but I'm not having any luck on my Windows 10 Enterprise laptop (version 1909, OS build 18363.959).
Enter and Shift-Enter confirm entry of the line item (equivalent to clicking the green checkbox icon at far right), while other combinations of [Alt, Ctrl, Shift]-Enter have no effect, i.e., Ctrl-Enter, Alt-Enter, Ctrl-Alt-Enter, Ctrl-Shift-Enter, Alt-Shift-Enter, Ctrl-Alt-Shift-Enter don't do anything.
Pasting in
"
from Notepad will show the desired input in the cell, but gives a "The formula for 'Module'.'Line Item' is invalid:" error.
Is there some other way to capture these line breaks?
Many thanks in advance,
Chris
@chrised209 ,
I wouldn't paste it in, but type it in using " + Shift + Alt + Enter ", the one combination you may have not tried. It is hard for me to show you because I have a Mac.
No effect.
To be crystal clear, I'm holding down the Alt and Shift keys while pressing Enter with my cursor between the quotes and with the checkmark icon visible at right and getting no response from the editing bar (or from the computer at all, really). I tried it holding down Alt first and holding down Shift first (the sequence shouldn't really matter, in my experience) with indistinguishable results.
Do you perhaps know of any alternate ways to get a line break into a model cell?
It may also be noteworthy that my target module and line item are dimensionless, but the module has a number of user-dimensioned subsidiary view items to feed some textlists to generate the To/Cc/Bcc listings.
DM me and we can set something up.
I want to take a moment to thank @rob_marshall for his above-and-beyond help on this issue.
The key problem I had in reproducing this solution above was that I was making a formula entry instead of an entry into the data cell. I wasn't able to enter a line break in a formula to extend across all relevant dimensions, but I was able to make a line break entry in a data cell outside of Blueprint view. On my Windows 10 machine, I was able to make the entry not with Alt-Shift-Enter, but rather with Ctrl-Alt-Enter. Storing multiple line breaks in a single cell wasn't effective, but text joining with it more than once worked.
@chrised209
Happy to help!
Thanks for the really nice post. It helped me while creating all the process for my Clients, I just have one question these emails are going to send from Mail of Windows 10, will that work with Outlook too.
Thanks
Suruchi Kapoor
@suruchi.kapoor
Yes, it will work for Outlook as well as Windows.
Great solution! I found this 3 years later and it still works very well. Thanks to all of you for finding all the relevant workarounds. (especially that Ctrl + Alt + Enter instead of Shift)
Hi ALL, I have a module where a line item (Assignments column) is formatted by a large ‘Projects’ list. Each record is assigned to a Project and this module is published to a UX page. When users apply a filter on the Assignments column, the filter dropdown displays the entire Projects list (since the column is…
Hi ALL, In my model, I have Need stored at a 'D3' RS Group level. I need to use this Need in another module at the G5 Location level. I currently have a mapping module where each G5 Location maps to a D3 RS Group. This Module uses D2 Role as dimension. but the line item I've to find the RS Group (Find D3 RS Group = 'FIND…
I couldn't find any formula to do this, but I want a way to put on the page/grid the connection details. This is so I know what connection I'm in rather than going into Connections details to see it. Is there an XL3 formula to return this value?
