-
L1 Help — 9.2.5 Activity: Add Formulas to Price Growth Rates Staging Module
Hi there everyone! I am stuck on L1 9.2.5 Activity: Add Formulas to Price Growth Rates Staging Module. I am not getting an error, but my data in the REV04 Price Growth Rates module is not moving forward into REV05, even though I am using the lookup formulas the lesson provided, and I can see that REV05 is accessing the…
-
Line Item 'Held or Revised' and 'To change' in Level 3 Sprint 1
Hi Community, I am confused how to approach the line item Held or Revised and To Change in my TAR02 module in my Sales Planning Model. What does these line items mean? I did some experiments with these but nothing fruitful. For reference, this is part of activity 8.2 of Sprint 1 of Level 3 certification.
-
3.3.5.2A Beginning Inventory, Forecast Demand, and Suggested Order Line Items
Hello, As per the below request, I have added the formulas but how can I check if the result of the formulas I have applied are correct or not?
-
2.3.8.2 Import into DEM01 Module, Import successful but 'All product' list is blank
Actual- Expected-
-
Level 1 Exam - Question 5
I dont know where i'm going wrong.....this is the formula I'm trying to use.... IF Employed? THEN Salary * 'EMP03 Employee Drivers by Role'.Bonus % [LOOKUP: 'SYS08 Employee Details'.Department, LOOKUP: ''SYS08 Employee Details'.Role ] ELSE 0
-
Level 2: Importing shipping method from SYS07 Location Details to SYS07 Distribution Center Details
I am not showing any shipping cost for most columns on INV 01 Inventory Ordering because it is not pulling in a default shipping method from SYS07 Distribution Center Details: It seems that I need to import data from the Datahub's SYS07 Location Details module. However, when I try, because SYS07 Distribution Center Details…
-
L1 Exam Question 4
I am stuck on Question 5 so i went back and I believe it is all caused by not being able to make Role a list that references the roles. It will not allow for this and is making it so that I can't move past question 5. Could someone assist me?
-
Level 3 - Accounts show in 8.2.1 can not be found in A1Accounts list
Review Level 3 model build recently and looks some content are refreshed. And in 8.2.1/ 8.2.2 shows stories on modification of account targets. Above sample of accounts are not in A1 Accounts list in Level 3 Model. Are these accounts just sample or somewhere can refresh the A1 list? (I download it from Level 3 course just…
-
9.2.6
I am having trouble with 9.2.6 course. My 5% that I type into REV04 is not mapping over to REV03 like it is supposed to. Even with the formulas completely accurate to what the training asked for. Any tips or things I can do for this?
-
8.5.3
I am having trouble with this Volume Inputs module and importing the CSV file. I cannot seem to get the import to run without error. Can someone walk me through this?
-
Tableau to Anaplan integration
Hi team, Could you please help me with best possible way to export data from Tableau and load it in Anaplan by writing script or something. Regards, Venkatesh
-
Publish a list as page selector to a dashboard
Hello, I have a nested list like the following. I want to publish only the parent as a page selector for a particular dashboard without giving the user the ability to select specific child. How can I do that? Parent Child A 1 A 2 B 3 C 4
-
Import Data into DAT01 Beginning Inventory Module
Hi, While I try to import Beginning+inventory data, There is this 4th column (purple) that I don't know what to do. Any idea please?
-
Level 2 - Sprint 1 - 1.3.10.3 Import Data into G3 Location List
Hey community, I am having some challenges getting the same output as the course shows. I have not been able to get the distribution center boolean to appear in the G3 Hierarchy list. Please see the screenshots below: * Course question and output * My output (missing distribution center boolean) * My location flat list *…
-
TIMESUM Formula - 1.5.7.1 SYS13 Account SKU Filter Module
this is my formula: IF TIMESUM('DAT03 Historic Volumes'.Volume) <> 0 THEN TRUE ELSE FALSE it does seem to work but when I copy paste in the exam it says incorrect. 1.5.7.1 Create SYS13 Account SKU Filter Module My formula Results seems correct Data03 Historic Volumes module Blueprint view However when I copy paste the…
-
Import failure for 2 cell
1.3.10.3 Import Data into G3 Location List In the Data Hub model, import data from the source saved view into the target list: Source: SYS07 Location Details module, Build Location saved view Target: G3 Location list
-
Anaplan Model Building Workspace Access
-
SYS12 SKU Details module
I am stuck on this. When I had my line item my board looks like this. What is wrong in my module ? I can't remove Time if in the line item I add Code, Product and Distribution center it looks like this> aren't they supposed to be in column?
-
1.3.15.1 Rename Actions
HI, I am lost for this part. I have creat a new process "5 Load Geographies". But then I don't understand want to do and why. Can I have some help please.
-
Account+Review+CYW+Scenario - Mexico values not matching the scrrenshot - L3 certification
Hello Anaplan community, I am currently working on User story 1.7 - 1.10 (Under section 8 of Sprint 1) and after building the country and segment distribution module, I noticed the values were not matching only for Mexico country.While investigating on this issue I noticed that the "Override" Boolean is checked but with no…
-
Model Schema
Model design should always come before model building. A model schema is used to diagram the relationships that will be built between the dimensions (time, versions and lists), the modules, and the dashboards in an Anaplan model in order to meet end user needs. Organizations may also have schemas detailing the…
-
Talent Builder Workspace Share?
I need to re-take level 1 and level 2 model building for upcoming interviews. Since the Talent Builder applications are temporarily on hold till 3/31/24 I was wondering is there anyone who already has access to a workspace via Talent Builder that would be willing to share access with me? Is that even possible? Thought I'd…
-
Level 1 Model Building Exam activity 7
Hello There, I am on Activity 7, I am able to bring the REP04 list data as described in the question. However, I am struggling with Page Selector, how can I get those dimension drop downs in text box? Secondly, I am also struggling with Line Chart, how to get years on X axis and the different colors for the executive,…
-
10.2.4 Activity: Import Data into Employee Drivers Module
I have mapped this but all the list items are getting ignored what should i do ? The correct output must be like this !
-
Level1 exam formulas error (activity5)
I tried to update the formulas but it shows Invalid fomula . Updated formulas for Bonus was below, IF Employed? THEN Salary * 'EMP 03 Employee Drivers by Role.Bonus %[LOOKUP: 'SYS08 Employee Details'.Department, LOOKUP: 'SYS08 Employee Details'.Country] ELSE 0 What exactly am I doing wrong here? Any help would be greatly…
-
Level 1 exam - model building activity 2
Hi, I'm trying to do the activity 2: "update the REV02 volume inputs module to include a formula to pull data from the DATA 02 SKU Volumes module". And tried the formula: 'DATA02 SKU Volumes'.Volumes but I get the error message: Level mismatch on common dimension Can
-
Done with L1 and L2. What next?
Hello Anaplanners! I recently completed my L2 certification for Anaplan. Unlike L1 and L2, there are no courses in the Anaplan Learning Center for starting or enrolling in L3 certification course. Can anyone let me know the next steps towards getting an L3 certification and an eventual Certified Anaplan Model Builder…
-
ERROR line item for assignees
Hi All, I've been working in Anaplan Workflow, when it comes to hierarchy task I am facing with a challenge. I chose a line-item driven assignee method in the hierarchy Task, but I was not able to assign the particular line item for assignees. The error showing in the line item for assignees: "There are no valid line…
-
workspace access
can anyone help me to get workspace access for level 1 model building
-
3.3.5.2A Suggested Order Line Items.
Can anyone please explain how we will calculate the suggested order line items? I have been stuck here for 2 days