Training

Problem with 2.3.9 Activity: Historic Volumes to Baseline Forecast
Here they say that the module DATA03 Historic Volumes , the Historic Volumes data is already loaded in the Data Hub model .But I think that there is a problem here because I don't have the same format as they show in tthis activity? Can someone help me with that please ?
Curiosity, Collaboration, and Connected Planning: Inside a 3-Day workshop
Author: Mikhil Agarwal, Certified Master Anaplanner and Delivery Manager at VISEO USA Inc. “They say a strong foundation doesn’t just support growth; it sparks curiosity.” That could not have been more fitting during our Anaplan onboarding workshop in Singapore last year. What began as a technical Level 1 Model Building…
Building a Center of Excellence
Overview Standing up a Center of Excellence is complex. There are many decisions to be made. Here are some of the materials to help get a basic understanding of building a CoE that are part of our CoE Success Accelerator Workshop. What is a Success Accelerator Workshop? Anaplan offers targeted workshops, Success…
Data Related Training Classes
* Anaplan Connect (301) * Anaplan Data Integration Basics (303) * Creating a JAVA keystore for use with Anaplan Connect Overview This set of classes address how data is used and managed within an Anaplan model: Anaplan Connect (301) Anaplan Connect enables the Anaplan administrator to automate Anaplan imports of data and…
Still stuck on "Confirmed PO Delivery" and "Confirmed PO Receipt", something isn't adding up.
I'm honestly not sure what to say about this one because I thought I had nailed down all the formulas, and then the corrected formulas, but here we are. I think I can narrow down where the errors are taking place, I just don't know how to correct them. In all truth, I could really use a review of all the formulas in…
L2 Sprint 2 - 2.3.9 Activity: Historic Volumes to Baseline Forecast
Hello, I keep seeing the following error message: Invalid formula: 'DAT03 Historic Volumes'.'Offset Volumes for 1st Forecast Year' = IF 'SYS01 Time Settings By Week'.'1st Forecast Year?' THEN OFFSET('DEM02 Volume Growth Rates by Week'.Growth %, -52, 0) ELSE 0 For function OFFSET, all line item arguments that vary by time…
What are good books to read for a customer about to install/use Anaplan for forecasting.
I am taking all the free online courses I can find. There is a book "Anaplan A Complete Guide 2021", is a newer version available, soon? Is it worth buying? What about Anaplan - "Complete Self Assessment Guide"…or will this be covered in our kick off meetings with Anaplan staff? Any other recommended Books/Resources, other…
L3 User Story 2.4
Hi Community, In L3 User Story 2.4 requires the comments to be seen by others. Who should see the comments? That Country Sales Manager's ? and do we have to create a link or add an line item for comments associating with all accounts and then publish it do UX so end user can add comments along side of the accounts…
Help with L1MB lesson 8.5.3 Activity: Import Data into Volume Inputs Module; Import not working?
Hello — I have been trying to import the data file Volume+Inputs into the REV02 Volume Inputs module with no success. Just a couple of disclaimers: I am in grid view when I try to import I have refreshed both the lesson view and the example view I have re-downloaded the file I have updated the grid view for the time being…
Level 2 training 1.5.7.2 Add Formula to SYS13 Line Item
Help please!! Line item: Has Data? Format: Boolean Formula: IF TIMESUM('DAT03 Historic Volumes'.Volume) <> 0 THEN TRUE ELSE FALSE Somehow, it did not give me correct result. Not sure what's wrong here.
Where to start?
I've just created an account and I am looking for the starting point to learn about Anaplan. Any recommendation or tip? Thanks! :)
NEED HELP ON LOOKUP
Hello, Good Day! Need some professional help on how I can replicate the weeknum function from Excel to Anaplan. I am relatively new to this platform. I have a module where I should be able to get the Peak Week from a date value (Peak Date). » So it's like the Weeknum function using the 'Peak Date Mid" value. I have another…
2.4.8 Activity: Create Detailed Demand Review UX Page
Hi I'm stuck at this activity where im unable to use the override checkbox in the UX page, but it works fine at the module view. Can anyone please let me know what im missing here, as i have reviewed the access driver module activity. Thanks & Regards Fardeen
Assistance with Locating the Level 2 Exam
I hope this message finds you well. Could you kindly assist me in locating the Level 2 Exam? Since the Anaplan Academy training platform update on December 3, I have been unable to find the exam for Level 2. If you could share the URL or provide guidance, it would be greatly appreciated. Thank you in advance for your help.
UX obstacle course or scavenger hunt
In as much detail as possible, describe the problem or experience related to your idea. Please provide the context of what you were trying to do and include specific examples or workarounds: As an end user, I want to upskill in UX pages in a fun gamified way such as an obstacle course or scavenger hunt, so that I can be…
what example(s)?
i am currently busy with Level 2 and have found now quite a few of these that says "like this example" ,but where is it? we are expected to comply with the steps but how can we if its not well documented?
2.3.8.2 Import into DEM01 Module All Products Growth rate
Hi, I am having problem getting the total of all products for each month and I have no idea why it is not populated. Can anyone please help on finding out why it is not populating?
Sales rep monthly Commission not matching with Anaplan 'Check Your Build' numbers?
Hi All Community Members, Despite putting a lot of thought and efforts, I am not able to figure out where am I going wrong. I have set all the Modules and formulae in place but still the numbers for the sales rep monthly commission is not matching with the Check Your Build numbers. Please find below details of my modules I…
2024 Recertification Requirement Announcement: Using Workflow in Anaplan!
We're thrilled to announce our 2024 recertification process for Certified Model Builder, Certified Solution Architect, and Certified Master Anaplanner. Being a Certified Model Builder, Certified Solution Architect, or Certified Master Anaplanner means that you’re a highly qualified and valued part of the Anaplan ecosystem!…
level 3 training sprint 2 2.3.1 Assigning accounts to territory question
hello everyone I am facing a question that after I reading user story 2.2 , which is about how to use count formula, I have to write some formula of items in QUO01 Territory Account Validation Moducle, and the Assigned>1?: item is asked for finding if one accout is assgin for more then one terrior. so I create a new…
Financial Planning & Analysis Model for Training
Hello, I just began my Anaplan training (level 1) and am looking for the Financial Planning & Analysis model they keep referencing but cannot locate it on my company's Anaplan site and cannot find anywhere to download it within the training. Can anyone assist?
Lesson 8.5.3
I am on my way to finish the Level 1 Model Building Training and I am in Lesson 8.5.3 and I am not able to rearrange the dimensions in the REV02 Volume Inputs model to the target screenshot. The Mapping failed… Help, please….Shalini
Level 3 - 5.5 Model Build Specifications
While Building Import process from the Data hub, I an getting confused should I import Sales Reps Flat# or G3S Sales Rep# in first Action of Build Sales Rep ? 5.5.2 Sales Planning Model - Import Processes Next, create import processes in the Sales Planning model to: Build Sales Reps Build Sales Rep Details Build Sales Role
Create Shipping Export Module and Create a Saved View
Hi Team, I have been struggling for a long time here in the INV05 Shipping Export module below is the blueprint mode: Below is the layout for my INV01 Inventory Ordering module The formula for Shipping Costs is as below: Final Shipment Amount / 1000 * 'TRA01 Shipping Metrics by Week'.'Cost per 1000 units'[LOOKUP: 'SYS08…
Ability to change color of the BLUE Anaplan banner in order to quickly differentiate between models
A helpful enhancement in future roll outs would be the ability to change the blue Anaplan banner to that of a color chosen by the Administrator. This will allow for quick user differentiation between Training and Production models they have access to.
L3 Account Assignment
Guys! PLEASE PLEASE PLEASE revise this training. It is so unclear as to what exactly you are asking us to do. This is not realistic, this is not a real life scenario, right! In real life we have discussions, we go to meetings, we follow an Agile methodology, and we get to ask questions whereas here you have left us in the…
Anaplan should provide a learning environment for Workflow functionality
My understanding is that there is a licensing fee (applied to all non-read-only users within a tenant) that has to be contracted and paid in order to open up the new Workflow functionality. I don't think this is fair, because how are we (as the Anaplan experts and model builders) to understand the technology to be able to…
Level 3 Use a published line item on the Account Assignment UX for the comment
Hello, I am unsure how to link the comment to the account that I assigned. It seems like I need to select the account first, and then provide comment for that particular account? Not sure how we can achieve it using a published line item.
2.4.7.1 conditional formatting add new rule option is not avaliable
Hello Can i know why I cant able to apply conditional formatting? why there is no new rule icon available when i select conditional formatting icon ? I have selected even a line item row or column and selected conditional formarting icon but still i there is no New rule option avaliable
L3 Sprint 2 User story
Hi Everyone, I am in L3 in lesson 4.4 as per below screenshot. I have used the same csv file to import the data in Data Hub model and created the list G4Territroy>Accounts# and pushed it into spoke model (Sales Planning model). Just need one confirmation as per below SS it mentions we have to import into Sales Planning…

Training

Discussion List