-
Not able to apply for Level 1 Independent Path
Hello - I just created my user profile and would like to apply for the Level 1 Program, however I do not see the option to Apply for the training workspace on the website. I see the image for Apply Now however it is not clickable.
-
10.2.2: Decimal places seperator error at importing data
Hi all, I have a quick NOOB question. As my browser is not set on US standards - I have some trouble when importing files that use "." instead of "," For decimal places. The result is if I import numbers that use "." as decimal seperator it gets treated as thousand seperator. So it get's displayed as $500.500 (fivethousand…
-
Level 1 Lesson 7, activity 7.2.4
Hi, I followed the course instruction to build the module SYS08 Employee Details and import data for Employee.csv. 'Code' and 'Name' and 'Dept' not loaded, then I tried to insert formula as suggested for 'CODE' and 'DEPARTMENT' but there was error message 'E2 EMPLOYEE#' is not recognized as a hierarchy in the model. The…
-
L2 1.5.5 Activity: Create Time Range - Create an FY19 Time Range
Hello All, Creating a New Time Range for the above L2 excercise; however, it does not appear that I am allowed to choose a start period that am I am being asked to do (see below screenshots). My suspicion is that the Model Calendar settings drive this behavior; however, the Introduction to Time Ranges video did not seem to…
-
Possible Hiearchy reset
Hey everyone! I've run into a problem On Level 2 of the model builder, the task was to create saved views from imports. I was saving an import and what i needed to import deleted the grid work that was originally there. Do you know how to reset a hiearchy? Thank you!
-
Lesson 9.2.5: 5% turns into 420%
Hello All I have a question I hope someone can help me with. I input 5% on my F19 for REV 04 , then i receive 420% for my REV 05 Is there antone who can help me out?
-
2.3.9.1 Select Source stuck
Hello I am trying to follow the directions for 2.3.9.1 Import Data into DAT03 Historic Model and I am getting this error: Also doing the same with I try and run the Process 9 import? Is something wrong with my Model or? Thank you.
-
1.3.6.1 Code and Items?
Hello Everyone, Instructions for 1.3.6.1 go as follow: 1.3.6.1 Create Build Region Saved View Create a saved view for importing: * Module Name: SYS05 Region Details * Saved View Name: Build Region * Include: Code and items Make sure to select SHOW for the Code line item and save the view. This will ensure that as new line…
-
Level 3 4.6.3 SYS14 Module
Hello So I was able to get the desired outcome but the formulas used are not as per the PLANUAL. I have created two system modules SYS04 (dimensioned by P2 Product) and SYS02 (dimensioned by A1 Accounts). But when I try to use the formula SYS02 AccountDetails.Code & SYS04 ProductDetails.Code to use(Line item: CODE) , I get…
-
Level 1 Activity 5 _ Employee expense Lookup Formulas resulting in zeros
I am getting zeros for my lookup formulas in Activity 5 for employee expenses. EMP03 Employee Drivers by Role seems right. Attached SYS08 Employee Details seems right _ Roles, Departments. Attached My lookup reference formula seems right - referencing the EMP03 file and mapping to the associates via Lookup in the Sys08…
-
Lv.2 Sprint1 1.5.2
Could you gime me an idea? I don't know why there is no data...
-
Activity: Import Data into FP&A Model
Hi Team, I'm unable to understand the import below shown is my mapping.
-
Import Final Demand Forecast into DAT02 Module
I'm unable to understand why errors are coming though i think mapping is fine plz help
-
Level 2 Supply Chain Time Settings
Hi all, I'm having some issues with the time settings on my L2 supply chain model, although it's only just starting to affect my work when I started on activity 2.3.9. For example, here is what my DEM03 module is showing, once I have all the formulas in: I think this is coming from an issue in SYS01, which currently looks…
-
Anaplan Case Number: 00435262
Dear Anaplan Team, Kindly activate my 90 days subscription requested, on 1st Aug 2022 at the earliest. Awaiting response. Regards, Pradeep Hebballi
-
View designer does not show on my card configuration
Hello community, I am stuck at 3.3.12, level 2 because I don't see "View designer" option from 3.3.9 lesson. I'll we really grateful for any help.
-
Invo5 shipping costs
The above image show what has to be done I have attach the data i am getting for shipping cost is wrong I am not able to rectify please help me out what i have done wrong .
-
MB 1 13 6 4 and 13 6 5
Community, Working through MB 1- on lesson 13 now to set up UX pages. The results of my first attempt at a Volume Chart, followed by Margin Chart result in something not desired. The line graphs follow along the periods then comes the full year values. The full year values make the visualization unusable from an end user…
-
INV01 Level2
I have attached screenshot ,what booleans I must have checked in INV01 so that my module will be ready for further calaculatons or whatever changes I should made in this module to make it calculation ready.
-
Level 2 Sprint 3 3.3.7.2 Add DCA to INV01 Inventory Ordering
Almost completed the work Just confused regarding my work plz suggest if I am wrong 1. Should I use "Submit Purchase Order Request" line item as formula in AD02 Inventory Ordering for Overrides "Submit Purchase Order - Write? " OR 2. Should I use line item "Submit Purchase Order - Write? " from AD02 Inventory Ordering…
-
Time Schedule for self-learners
Hi everyone, I am a self learner for MB 1&2. Has been about 2 months and because of my daily things I am not sure I will finish on time(90 day ). Is there any possibility to re-schedule? Thx in advance.
-
Classic Dashboard - What does this mean ?
Dear Community Members, I am on MB Lesson 12. I have noticed the phrase "........ on a Classic Dashboard or a UX Page" is mentioned frequently in the lessons. I may have missed it from a previous lesson, but I do not understand what the "Classic Dashboard" refers to. Does this refer to the overall Anaplan Platform…
-
The Filter is gone if left unchecked on Product Replenishment UX Page
In Level 2 Model Building 3.3.12 Activity: Create Product Replenishment UX Page, I should've make a page similar to this prototype: This is the screenshot of the UX Page that I've made: If you take a look, 'Planning Period Planning' grid only show us the checked months (Jan and Feb). It used to show all the months, but…
-
Check your Work png file not showing the answers in MB1 lesson 8 and lesson 9 (so far)
I am working on MB1 lesson 9 now. In the previous lesson (8) and in this lesson so far, the png. files to "check your work" after each activity are not working. In all previous lessons (1-7) I could check my work. Is anyone else experiencing this issue? Maybe it is a bug with the training material. Does anyone have an idea…
-
Is Something Wrong With my Role List? Level 1
Hi, So while trying to update my Emp02 Employee Expenses module calculations for bonus, car costs, phone costs and medical costs to reference Emp03 Employee Drivers by Role module, I get this error: "Invalid error for 'EMP02 Employee Expenses'.Bonus: Automatic sum of 'EMP03 Employee Drivers by Role'.Bonus % over Role…
-
Issue with changing source model
Hello, I am currently following the Level 2 - Model Building Sprint 2. I had to change the source model to the Data Hub created during Sprint 1. Unfortunately, the name of the source didn't change when I clicked on "Edit Mapping" but just added the details in "Mapped to". When I followed the next steps to populate data…
-
MB 1 Activity 11 3 3 Check your work Error (I think)
Working through MB1 11 3 3 I believe the "Check your Work" reference has an error. Looking for a confirmation from experienced Community Member. The activity required that we Set Style Setting to Summary 2 for the Other Costs Line. I would expect that line to be Bold/Indent like that other Summary 2 Style Formatted line…
-
Data not matching In inv01 inventory ordering
I am stuck on this module from last 2 day but not getting how to get data correct my formule are correct The image for data what i have got is below
-
Create Distribution Center Summary UX
Hi Team. I'm not able to set conditional formatting like for the value of 80% green and around 100 red and also i need to ask are the values feasible in the Distribution center capacity module.
-
3 3 12 activity create product replenishment ux page conditional formatting
conditional formatting is not working in UX page using the max middle and min criterion even in module its not working. How can I make it possible in this case * Add conditional formatting to display Confirmed Purchase Order Receipt as green any time the value is greater than 0. * Add conditional formatting to display…