-
Visibility of whether a line item is referred by an action
In the blue print view we can only see if a line item is referred by formulas. If we similarly had the visibility of whether a line item is referred by actions, it would be very helpful.
-
Ability to refer to the total of all line items in a module
Presently to get a total of all line items in a module we have to create another line item and manually add the other line items in the module. This is both time consuming and error prone. Also if there is ever a addition of a line item in the module the formula for total has to be updated. Instead if we had a simple…
-
Increase the limit of list item beyond 999 999 999
As a anaplan coe lead, i need to enable more complex and scalable use cases into anaplan and integrate seemlessly with high volumes system working with event or log based architectures. To cover these, one limiting factor is the hard limit over the 1billion minus one on lists. I d like to have this limit raised to higher…
-
Current page option in the context area for a context selector filter
I would like to apply a filter to a context selector to use a filter dimensioned by what is also another context selector and wanting the filter to update with what is chosen from that other context selector. For example: I have a list as a context selector and time, which I only want to show the items chosen in the list…
-
Automate/Improve Resetting Next Item Index for Lists
Problem: There is no automated or pre-emptive way to reset the “Next item index” on a list without first clearing the list. Issues Caused: When using a data hub with a large data set that is refreshed daily, we regularly exhaust the item index. This causes the import process to fail and results in refreshing of all…
-
Module Lines System Generated 'Created by' and 'Modified by' Detail
All module lines should include system generated "Created By" and "Modified By" detail for audit trail, compliance, and support reference. It is not always clear as to whom created or modified a line in a module. If a consultant or contractor is making changes to lines, the only way to find that detail is by combing…
-
Saved View Utilization Audit
We're currently updating our Saved Views naming conventions and below is an initial draft. Part of the intention is to make it clear how any given saved view is being utilized. It would be great if, when auditing Saved Views, we could see how they were being utilized automatically. (2 examples below) Because of this lack…
-
Add back the 'Used in Dashboards' reference for Modules (with NUX)
With the NUX in place and being the standard for dashboarding, it would be good to have the ‘Used in Dashboard’ reference working again within the Model. This would be good for the transparency/auditibility of the model, for all users. With the Classic UX, it was easy to see when a Module was used in any of the Dashboards.…
-
First Model Copy Throws ALM out of sync
I just encountered an issue where I made a model copy of a deployed model in production (the first model copy of production made) and it threw ALM out of sync. A Model copy should not operate as a new revision tag that makes PROD out of sync with DEV.
-
Rankcumulate with Multiplication
I use the rankcumulate with for allocation. I have come across something that I don't have a solution for: Compounding percents within a list of data. This could be used for compounding mardowns for pricing to see the aggregate affect. Example soming costs $100. I take a 20% price reduction in the first period and then…
-
September 2022 releases and October sneak peek - View Modules Used In Pages
The release this month is helpful but I think it missed expectations. What would be more helpful is to be able to see what UX pages a module is published on in the exact same way the "Used in Dashboards" column is in the Modules. The update would more or less be "View Pages Used in Modules". I used the column in the…
-
Be able to select a default summary type for a model
In the spirit of trying to keep our models size-efficient, we encourage model builders to set the summary type to "none" whenever possible in calculation modules (trying to follow the DISCO method here!). Unfortunately, when a new line item is created, the summary type always defaults to "sum" and it's very easy for model…
-
Enhancement Request for the ability to assign list items to a subset using a formula
I would like the ability to populate a subset based on a line item attribute in another import module that contains the full list.
-
Statistical Functions Package: Normal Distribution
Concept: Include basic Statistical Functions in Anaplan Description: I miss some basic statistical functions among the available functions. These formulas are extremely useful when it comes to calculate chances or risks, which is a common and useful bit within the forecast calculations. A good example is the lack of a…
-
ALM syncing when multiple developments are happening
We have 2 developers working on the same model in different modules. One has completed his changes but the other is not ready to sync. Unfortunately you have to sync the whole model, and this means partial changes would then be synced. If the first developers' changes are urgent, waiting for a major change to be finished…
-
Add Notes/Comments on Management Reports
Users(Stakeholders/CEO etc) must have access to add Notes/Comments on the Management Reports they view for better understanding, similar way we have in powerpoint
-
Block line items deletion when used in saved views or actions
As a model builder i need to not be able to delete any line item that is present in a saved view and / or used in an action in connected models. With the growing number of connected models and their imports between models as the connection, any line item deletion, move or renaming can result in breaking the models import…
-
Impact of saved views in Connected Planning
As companies are growing, their use of the workspace is also growing resulting in multiple models. From an user standpoint, it is complicated to audit every saved view, as you can only see those that are being used in the model where they are being imported. As such, could we have a new tab in imports not only to see the…
-
Create ABORT button when getting stuck with changes/formula when you made mistake.
When submitting changes to line item, and you know you did mistake. Please let us ABORT calculation by Anaplan. It will save tie and resources when building model.
-
Use ChatGPT's API to produce commentary and send it back into Anaplan
I've love to see some more native API's to connect Anaplan into ChatGPT API to be able to generate commentary. This would be an application similar to CloudWorks or PlanIQ that allows you to configure certain fields to be selected and then a certain style or questions can be asked to ChatGPT to produce the commentary based…
-
Disable formulas in Version
I would like to see the possibility to disable formulas for an entire Version. This would enable to save a bulk copy of latest forecast without regards to change in logic. Currently this is managed by saving a copy of the entire model but that makes it hard to compare.
-
Page Name in the module list
Currently we have this option to indentify the modules used in the page but model builders have to open each page in the modelling experience to identify the module. It would be really easy if we can identify them in the module list. May be if new column can be added and all the pages attached to the module is updated then…
-
New Summary for Hidden Items
Currently all the line items are shown by default in the UX pages. It would be good to have a flag / summary in the items that we are using to make calculations, but are not an output and we want to be hidden under all circumstances.
-
Idea exchange search
Currently entering a search on the Idea Exchange page returns every piece of collateral on the community regardless of type. Please can the search on the idea exchange automatically filter (or only show) existing Ideas
-
Add used in Pages to the Actions Screen
The screen of actions shows where each process or action is used. For actions, it shows the process, for processes (and actions) it shows the dashboard. Please add a new column to show which UX pages the action or process has been published to.
-
Function to Count Booleans
There are occasions in a model where I want to count the number of True or False boolean values. Currently the only way to achieve this is to have another line item with an IF THEN function to create a 1 or 0 and then sum the line item. It would be great to have a function to do this automatically.
-
Version subsets and selection as a format
It would be great if you could select Versions as a format of a line item. This would make it much easier to pull data from a specific version into a module without versions, for example using a lookup within a line item. It would also be great if we could create subsets of versions in models where there are many versions,
-
Ability to add multiple values to a text filter
Description of the enhancement required: Text list filter delimiter An example of the enhancement: Text line items can be filtered by more than one value. How would it help their business process: Filter of text string with a delimiter. Want to be able to set a filter on a text line item for more than one value without…
-
Shortcuts for Anaplan in new user experience
Having in mind recent improvements in the way that anaplan is using new formula formatting and "inteli-sensne" like interface when using bottom formula bar, its so much wast that there is so few shortcuts inside anaplan. Some of them are not working at all with new experience (Ctrl+>, Ctrl+< - working only with anaplan…
-
Allow hashing out of lines in the formula editor
Issue: As a model builder, we sometimes need to alter lines of code in the formula of a module. It would be really helpful if there was a character (e.g. hash symbol "#") that Anaplan can ignore so that model builders are able to quickly remove certain lines of code from being used in the calculation without having to…
