-
Reactivate Anaplan Workspace
Hi All, My workspace access has expired after 90 days. How do I reactivate my workspace account /Access? Regards, Meenaz
-
why my Anaplan workspace access it is rejected 90days trial period?
I don't have the Anaplan workspace access it is rejected 90days trial period. I learned level1 in the Anaplan community. please check my history and provide the workspace access. I want to learn up to level 3. Please provide the workspace access.
-
Level 1 Talent Builder - First participation in the forum
Hi Everybody, I'm a new student and i would like to pass the exam for the Level 1 TB (independent). If my understanding is good i need to finish courses video before having the acess to the exam. but the probleme is in each course there is activity section about the Unicorn Candy Company model which requires to get…
-
L3 Sprint 1 - Location Details?
Regarding User Story 1.4 & 1.5, the account / location relationships are empty in both the hub & spoke models. I don't see a downloadable file that gives this information (perhaps I missed it?) I can't seem to get the numbers shown in step 6.3 without this information though. Are we expected to make up which accounts are…
-
Level 3 Sprint 1 Point of Sale (POS) System
Hi, I am in the Level 3 - Sprint 1 Training section. In section 4.2, it says to utilize the Point of Sale (system). I can't seem to find the location of this system. Where could I find it? Thank you!
-
Level 2, Sprint 3 - DCA
Hello, Help please!!! I have been struggling with this for almost half a day and I just cannot get my module to replicate the example given in the sprint.. In the original example, all the cells are blank (Week 1) if the Submit PO Request Boolean is not selected but I just can't figure out how to make that happen in my…
-
Level 2 Model Builder Training - access to Sprint 1
Hi Team, I am trying to start Sprint 1 section from the L2 training. However, I the link to Sprint 1 training is not active for me. I do have Level 2 introduction course completed. Can someone please help figure out how to move to the next step? Thanks, Maggie
-
Level 3 Model Building Sprint 1: TAR01 Detailed Sales Target module
I'm working on my L3 Model Building, It has been paused for quite sometimes due to my confusion in how to fill The TAR01 Detailed Sales Target module. I can't even create a module to verify the The TAR01 Detailed Sales Target data. Here is the TAR01 Detailed Sales Target module that have been filled Here are the formulas I…
-
3.3.7.2 Add DCA to INV01 Inventory Ordering
I have tried working on this for hours (!!!) and have read every community article regarding this lesson and it is not working. Can someone explain to me where I am going wrong? PLEASE HELP!
-
Workflow Owner Role
I cannot find a workflow owner role to assign. I am a Tennent Admin and so I thought I would go to Administration and find it there with the other roles but it is not there. Is it someplace else or is there a secret button to press to make it appear? bottom line, how do I assign the workflow owner role?
-
6.11.1 Activity: Add Version Details Module
While creating the versions module the budget doesn't show up why? Help me here plz.
-
Why is the formula on this line item referencing the forecast? Maybe I'm missing something
11.3.4 Activity: Add Formulas to Profit & Loss Report Module Head Count : IF 'SYS09 Version Details'.Forecast? THEN 'EMP02 Employee Expenses'.Headcount[SUM: 'SYS08 Employee Details'.Country] ELSE 'DATA01 P&L Actual and Budget'.Headcount I ask because the modules don't just contain one specific element like say just…
-
Native Time must shift with snapshot period
I have native time and snapshot period as my dimensions, I want the data to populate when I select (snapshot period as a page selector) Snap - Feb 23, the native time on the grid below must show from Feb 23. Created module with Snapshot period as a dimension to use that to show the forecast months, it is of no help as the…
-
Anaplan Modeler
I have worked with Anaplan but only at data input level. I want to do Anaplan Modeler training. Can someone guide me.
-
Volume Import - Import keeps failing - Please help
Here's my Source to Target Data Time: I’m using YYYYMM Product Code & Location Code are fine. Fixed line item, I selected “Volumes”. Error Message: I don’t understand why it doesn’t accept the time format.
-
Lesson 8 : Revenue and Margin Modules
Anybody can help me? i already entered the formula, but the number doesn't appeared when i view the product family page. but if if i checked at the products module it already aligned with the product family as a parent. i will be thankful if anybody may help me. Thanks
-
Workflow Feature Anaplan
Hi All, I was testing out the Workflow feature in Anaplan, could I get some help on how to use the machine task (data write feature) and hierarchy task? Do we have any documentations on how to use the different tasks in workflow. Is there a way we can show that a workflow or a task has been completed in the NUX? For…
-
9.2.6 lesson
I am working on 9.2.6. I have updated and checked all formulas but Revenue, COS, Margin and Margin % do not match with what solution is shown in exercise. Can anyone please help?
-
Request for Workspace access
Hi Team, I had requested for getting access to 90 days free access to Anaplan workspace just a day ago. Can you let me know until when I will get the access. Regards, Dipak Sah
-
3.3.12 Activity: Create Product Replenishment UX Page
Couple of questions based on my current UX Page and the screenshot from training * Is there any way to shift the context selectors on the top? i.e. if I want to have Time on left and Product on right instead of how it currently is. * Why are the Booleans in the INV01 grid not editable like they are in the material's…
-
I am stuck on importing data for REV02 Volume inputs module.
Attached is the screenshots for your reference. Kindly help as been stuck on this for a while.
-
I would like to request 90 day access to complete the Level 1 Anaplan Model Building course
-
3.6.1 Activity: Create Roles & Test as End Users
Hi, I have been having trouble in understanding creating roles. I have created the roles required in this assignment but I am not sure if I am doing it correctly and I can't change my workspace admin access. Is there anything I can compare my work to, to make sure its correct before moving forward. Any help is appreciated.
-
How to Identify a new entry for a particular Column in a Numbered List?
I have a numbered list in which a monthly data is uploaded every month, So in Anaplan I want to set a logic to check which are the new addition in a particular Column having from last month to the current month. TIA.
-
Data Copy Model to Model
Hi, I want to copy the data from one deployed model to another deployed model, what would be the best strategy to complete it with using minimum import actions? Thanks, Anmol Sarna
-
GTM Certification for Partners_where the certification
I have just completed the GTM - Go To Market course, but couldn't see the certification in my profile in Anaplan community. Does anyone know where I can find the certificate? In another question, I confirmed that I would send an email, but I couldn't find it . Thanks in advance.
-
Role list Model builder L1 exam
Hello are you able to explain why I have a situation like that? The parent is there but in the general list the field is not populated and I cant populate. I dont have any list member named All Roles. Thanks
-
Level 2 Conclusion INV05
Hello, i am trying to create the formula for INV05. But I am getting 0 for "Shipping Costs" . Here is the formula that i am using : 'INV01 Inventory Ordering'.Final Shipping Costs[SUM: 'SYS08 SKU Details'.Supplied By] and this is my INV01 Inventory Ordering Can anyone help me please ? Thanks!
-
Issue in downloading data for LVL1 Model Building Exam
Hello I am stuck here, I cant download the last files, it gives error. Can you please help? Thanks
-
Revision tags question, can we choose the change ?
Hello ! I have a quick question about revision tags. When I create a revision tag and I made some changes. Can I specify in a revision tag that I don't want to load one of the changes? Thanks, William