-
Historic Volumes data
Hi Can anyone reply to the below I am also facing same issue with time scale the Hint says NOTE: The Historic Volumes data includes the ACTUAL sales volume of product SKU from FY19. The Supply Chain model's Model Calendar begins in 2020 and does not include any previous years. If you run the Import Process as-is, you will…
-
3.2.11.3 Create Saved View for Combination Chart
The Product Replenishment User Experience page will include a combination chart of data from the INV01 Inventory Ordering module that displays the weekly data for the months selected with the Planning Period Filter. In the INV01 Inventory Ordering module, create a saved view: Saved View Name: Chart for UX * Include…
-
Level 2 - Sprint 3 - 3.4.3
The formula for Country Made in" is Parent(distribution center) I am getting an error, I need assistance
-
3.4.4 Activity: Create Stock Exceptions Review UX Page
Hello , I am working on Level 2 training and have been stuck on this activity. I am not able to set up page to sync as well as not able to set up SKU view from INV2 module. I would really appreciate support with this. Thanks, Alina
-
New Bee How to get Workspace
Hi All, I ma new Bee and little confused with the process to learn Anaplan. While activating account, I did apply for 90 day workspace and started the course for level 1 Modelling. The course steps asked me to confirm if I have workspace and admin privileges'. Not sure where to look for to see I have workspace allocation…
-
3.2.11.3 Create Saved View for Combination Chart
Hi, I am trying to create Saved View. Time skips from Week 4 FY20 to Week 1 FY21. Please see my screenshot and guide me. Thanks, Mark
-
3.2.11.3 Create Saved View for Combination Chart
Hi, It says here that "Filter the data using the Planning Period Filter Weeks Only line item in the SYS01 Time Settings by Week module. " I did just as instructed but then i came out with this. Can anyone tell me what I did wrong? Thank you. Best Regards, CK
-
2.4.11.1 Create Product Family Manager Role
In the Supply Chain model, add a new role: Product Family Manager. Each Product Family Manager should be able to make changes to the Volume Growth Rates for only their assigned Product Family, but only view the data for the other three Product Families. The Product Family Manager role should be able to see the Detailed…
-
3.3.5.4 Update INV01 to Allow Override of Order Amount
@Misbah Can u let me know if its right? are my formulas right?
-
3.3.7.2 Add DCA to INV01 Inventory Ordering
Add Read and Write Access Drivers to INV01 Inventory Ordering module to set up Dynamic Cell Access to perform as shown in the example below: Week 1 & 2 (blue highlight) * Week 1 shows the result when Submit Purchase Order Request is NOT checked. * Week 2 shows the result when Submit Purchase Order Request is checked…
-
level 1 lesson 8.5.3 mapping
Unable to import file properly and map Could you please help me ...
-
Level 2 - Sprint 3 - 3.3.5.3
3.3.5.3 Check Your Work After you have added the line items and formulas for the INV01 module, compare your model with this example: Expected resultMy result Above are snapshots for the expected numbers and what I got after entering the formulas required. They are discrepancies, can anybody please let me knw what went…
-
Activity 8.8.2
Hi, I am unable to add the right data in Fy 21 and FY 20 in the REP 01 Country Margin Report Module. I have added the exact formula as well but it is showing the correct answer in only the FY 19 rest two years are incorrect. I have check my other modules i.e., the referring module for this formula is also correct but the…
-
Testing as End Users
Hi, I'm at the end of Sprint 2 just before the exam (Activity 2.4.11) which is asking one to test as end users. Think am good but just need to check the following: 1. Can this be done while still with WSA rights still on? Video seems to suggest we need to turn this off but that's cumbersome for a self-learner as I'll need…
-
3.2.11.3 Create Saved View for Combination Chart
3.2.11.3 Create Saved View for Combination Chart The Product Replenishment User Experience page will include a combination chart of data from the INV01 Inventory Ordering module that displays the weekly data for the months selected with the Planning Period Filter. In the INV01 Inventory Ordering module, create a saved…
-
Sprint 3 - 3.5.4.2 Create Distribution Center Capacity Module
Hi, In activity 3.5.4.2 Create Distribution Center Capacity Module formula I gave for Percentage Full is Total Beginning Inventory / Distribution center capacity. But result is greater than 100%. I'm attaching the screenshot. Please help. Thank you very much
-
3.4.3 Activity: Create Country Summary Module
Hi All, I am stuck in this exercise almost 2 hour, not able to proceed further. Can anyone please help? I have added line item "Country Made in" SYS08 SKU details module. Now i know that the formula in Safety stock flag count would be 'INV01 Inventory Ordering'.Safety Stock Exception Count[SUM: 'SYS08 SKU Details'.Country…
-
7.2.3
I'm stuck trying to map this import. Below is an image of how I was trying to map it. If anyone knows how to map this correctly I would appreciate it.
-
3.2.11.3 Create Saved View for Combination Chart
3.2.11.3 Create Saved View for Combination Chart The Product Replenishment User Experience page will include a combination chart of data from the INV01 Inventory Ordering module that displays the weekly data for the months selected with the Planning Period Filter. In the INV01 Inventory Ordering module, create a saved…
-
Level 1 lesson 8.5.2 Mapping options
While doing this activity i faced issues while mapping it. But in my workspace there were an additional tab of time while i was mapping it. Could you please help me out to complete it correctly.
-
Workspace Access Navigation
Hello, I have been granted access to 90 day free access to the workspace. I am working towards completing the model building courses. Can you please suggest how I can access the workspace (navigation/instructions) as I am unable to find and start using it. Thanks, Alok
-
LEVEL 2 - SPRINT 3 - 3.2.11.1
added the formulas , Let me know if anything else is required to be done in the activity Are the last 2 line items formulas correct? Anything else to be done?
-
sprint3
Dear Members , Have used the below formula for 3.3.5.2B Shipping Line Item * Shipping Time Weeks: Show the shipping time associated with the shipping method. 'TRA01 Shipping Metrics by Week'.'Shipping Time (Weeks)'[LOOKUP: 'SYS08 SKU Details'.Product] Not able to get the correct answer . Thanks
-
Level 2 - SPrint 3 - 3.3.6
Attaching below are what is expected and what i got, need assistance regarding this. Let me know if i have to attach my formulas too
-
Level 2 - 1.3.10.2 Import Data into G2 Country List - Error
Hi, 1.3.10.2 Import Data into G2 Country List In the Data Hub model, import data from the source saved view into the target list: * Source: SYS06 Country Details module, Build Country saved view * Target: G2 Country list NOTE: This list is part of the geographic hierarchy. Remember to designate the Parent when importing…
-
7.2.3 Activity: Import Data into Employee Details Module
I could not do the mapping correctly. I can not see all the required columns. Could you please help me to understand what I did wrong? Thank you!
-
Sprint 3 Questions
Hi , Facing an issue with the below mentioned ask 3.3.5.2B Shipping Line Items * Shipping Method: Show the standard shipping method for the SKU. * Shipping Time Weeks: Show the shipping time associated with the shipping method. Line Item: Shipping Method+Line Item: Shipping Time Weeks I have used the below mentioned…
-
sprint 3
Hello members , I am Unable to understand what needs to be done for the following : 3.3.5.2A Beginning Inventory, Forecast Demand, and Suggested Order Line Items * Beginning Inventory: This line item needs to display the value from the Beginning Inventory line item in DAT01 Beginning Inventory module for the first week of…
-
L2 - S3 - 3.3.5.5
Want help with this formula.
-
L1MB 8.5.2 Import Data into Price Book Module
I'm importing data in activity 8.5.2 in Level 1 Model Building, but the results shows different numbers than expected. My models shows: It should be: It seems like my data import doesn't recognice the right decimals of the numbers that were imported. Anyone having the same issue? How to solve this? The steps I followed…