-
Anaplan model builder level 1 exam activity 2
Hi, I am trying to update REV02 volume inputs from DATA02 SKU volume module using a formula. when I type the formula ‘DATA02 SKU Volumes’.Volume , it returns the error message that: invalid formula for REV02 Volume inputs’. Volume. Automatic sum of DATA02 SKU volumes’.volume over P3 SKU hierarchy is not possible as P3 SKU…
-
Can't get past Level 1 activity 7.2.3 - Import Mapping
Hi - I keep running in issues with the mapping - please could someone assist?
-
Module
Hi, I am getting Lesson 6 in the level1. Even though I followed all the instructions, my result looks different than in the example. Where did I go wrong? Please help me? Thanks! Mark My screenshots: Example's screenshot :
-
DATA02_LEVEL 1 model import issue
Hello Community, I am trying to import SKU.Volumes data into the DATA02 module However, I am facing issues while importing. Below is the step 1 STEP 2 STEP 3 STEP 4 STEP 5 FINAL OUTPUT Can someone please guide me? Thank you in advance
-
6.11.1 Activity: Add Version Details Module
Can you please help Expected mine
-
Data type mismatch: format other than LIST or DATE being referenced as a relation
When I am trying to enter the formula in REP02 Size Margin Report revenue i am getting an error like this ... (Data type mismatch: format other than LIST or DATE being referenced as a relation)
-
Ending Inventory
My formula for Ending Inventory = Beginning Inventory - Forecast Demand + Confirmed Purchase Order Receipt On the SKU level the ending inventory values are matching with the values shown in the activity picture, but when i change it to all products then the values are not matching up. Please help.
-
Request for Workspace access
Hi Team, I had requested for getting access to 90 days free access to Anaplan workspace just a day ago. Can you let me know until when I will get the access. Regards, Dipak Sah
-
Level 2 - 1.7.3.2 Import into SYS08 SKU Details module
Hi, In activity 1.7.3.2Import into SYS08 SKU Details module it says Use the saved view from the Data Hub model to import into the Supply Chain model SYS08 SKU Details module. In this which saved view we have to import there are 2 saved view. 1. Build SKU 2. Import SKU Details In Supply Chain model SYS08 SKU Details module…
-
Level 1 Model Building Exam Model Building Activity 5 correct sequence
-
Level 1 Exam question 7 (should the answer be rounded?)
Hi, In response to question 7: What was the total expense for the FY21 executive bonuses in the Americas? the total equals XX.999999999996 do I have to round up? Thank you
-
L1 Exam - Activity 5 and Questions 4 and 5
I finally got the formulas valid for Activity 5, but now the only values I'm seeing in Bonus %, Car Costs, Phone Costs, and Medical Costs is 0. Can someone tell me what I'm missing? Thanks in advance!
-
3 3 12 activity create product replenishment ux page
In sprint 3 Product Replenishment UX page the first card displays Planning period filter line item from SYS00 Time settings by month module. It is a Boolean formatted line item. By default all the line items are selected. Whenever I unselect any of the month then the unchecked month is disappearing from the display. In…
-
Level1 Model Building Exam questions
Hi, I am planning for attempting the Level1 Model Building exam in few days. Can any one help on providing below details? 1. For attempting the exam, do we need to complete the Lesson 14 about Classis Dashboard, as it is given as Optional in the lesson itself 2. Exam time 3. Exam pattern (Multiple choice Or hands on to be…
-
Level 9.2.6
Hey guys, I am trying to add a number into the Unit cost line item but when I click the cell, it appears to be noneditable. I am working on the LOOKUP functions
-
12.4.1 Conditional Format
I feel like this is a easy fix but haven't found the right solution. it's not mirroring what the example should be looking like since the departments are in a different place. and since employees need to be under departments, im not sure where to go from here
-
Level 3 Sprint 1, Build 7.3
Hello, I know this is an example, however I am unable to get these numbers Account Review Module For Small Segment my numbers are: $10,716,645, is anyone having the similar issue? any guidance will be appreciated. Thank you in advance.
-
8.2.2 Activity: Add Volume Inputs Module
I am having a challenge creating the volume input module properly as the location is showing Region. How can I change from the Region format?
-
2.3.9 Activity: Historic Volumes to Baseline Forecast and 2.3.9.1
Hi - Super stuck on Activity 2.3.9 and 2.3.9.1 for the past 3 days. Any help would be much appreciated. Question 1 - for 2.3.9, what am I supposed to do here? The directions or lack thereeof are super unclear. 2. When I'm try to run Action 9, I get this error: "Import into DAT03 Historic Volumes module unsuccessful: Ensure…
-
Level 1 Exam - Model Building Activity 4 importing data into SYS08 Employee Details Module
Hi Team, I need your help on this data importing. I have downloaded the Employe Details by Role.txt file but, I see the data is not being mapped correctly into the SYS08 Employee details module. Downloaded CSV format : I have tried by converting CSV to txt format. Still the data is not being mapped properly while…
-
Level 2 Sprint 2 - 2.3.11.3 Create Line Chart Saved View
Hi there, While creating the saved view for the line chart for my DEM03 Demand Forecast module i noticed that I only have 1 year of data for FY20. The requirement is asking for a view with 2 years of data (FY20 & FY21). I'm looking for some help in getting my formula correct. What i did was i created a new line item in my…
-
Medical Costs-Cert Question
Hi, I have trying to complete the Medical costs for 2 days now and I can figure it out. I created the list of roles: Created EMP003 Employees-imported employees by roles data Added Roles to SYS08 then imported the txt: I try to amend the formula to take in EMP003 annd SYS08 Roles Medical costs - IF Employed? THEN 'EMP003…
-
General List
Hi, I am getting Level 1 course. In the activities of the lesson 4, the child hierarchies I created under the parent hierarchy don't show in the general lists. I can see them only under the tree view. How can I see all hierarchies (with child) in the general list? Thanks.
-
I receive the following error message when trying to access my Level 1 Model Builder Model
An embedded page at us2a.app.anaplan.com says Sorry, failed to load application: [object Object] Any idea what this means or how to fix it? I'm currently trying to complete the 7.2.3 Activity: Import Data into Employee Details Module Thank you!
-
Model Builder 1
How do I go about taking the Level 1 Model Builder training course on line?
-
3.3.3.2 Import Data into DAT04 module
Hi, Why would my module be indicating that there are no items in the P3 SKU list? the second screenshot indicates that there is data there.
-
2.3.9.1 Import data into DAT03 Historic Volumes module - DAT03 Historic Volumes'.Export" failing
Hello Community, Need your help I am not able to pull the data into the Supply Chain model from the Data Hub model. I get following error. I checked older posts, didn't find a solution for my problem. I have attached all related screenshots. Can someone take a look and advise. 9.1 Import Historic Volumes Model object…
-
2.3.9.1 Import data into DAT03 Historic Volumes module
I am unable to match my training screen with Anaplan document. and i received fail message for 9.2 Import opening stock. attached documents is the screen shots of my actions please support .
-
10.2.1 Activity: Add Non Employee Expenses Module
I'm currently trying to add the formula for the Total row, and I'm wondering why the SUM and LOOKUP formulas I've tried are invalid or not working. Here are the formulas I've plugged in so far: 'OTH01 Non Employee Expenses'.Total[SUM:'OTH01 Non Employee Expenses'.Shipping Costs, SUM:'OTH01 Non Employee Expenses'.Rent,…
-
Level 2 Conclusion Dem04, Inv 05
Hello, I am trying to create a Inventory 05 and Demand 04 From direction, It says that I need to use subsidiary view to remove the time dimension and I lost from here. I watched subsidiary view video and I can't find any information how to remove time dimension. For Demand 04, I just change time scale and I see the…
