-
Level 3 Sprint 1 - Instructions for Target Review UX and Account Review UX?
I'm going through Sprint 1, and was surprised to see instructions to "use the Account Review UX" in 11.3 Check Your Build, as well as instructions to check Target Review UX and Account Review UX in 12.2, as I don't remember and can't find the instructions to build these. Did I miss these instructions, or is it meant to be…
-
Level 2 Model Building, Sprint 3, INV01 Inventory Ordering
Hi Everyone! May be you can help me to figure out why some of my numbers didn't match... And what is wrong with the formulas? May be I'm getting wrong the instructions and do not understand something... I appreciate any help. Thank you. Thats how numbers are supposed to be Thats mine. and not the same: 1) Beginning…
-
L3 Spring 1 4.7 Numbers match but method correct?
Hello, I have managed to match my numbers to '4.7 Check your build' but not sure if my method is correct? Since we have been told not to share formulas, I would like to ask if my approach is correct without mentioning any possible answer? My Sales Planning model - SYS03 module P2 Product is derived using FINDITEM Product…
-
DAT01 Baseline Financial Forecast and DAT02 PY Revenue to CY
Hi does anybody know why the grand-totals for both (see attached screenshots) are not the same? The DAT02 screenshot is from Lesson 15 - 4.7 Check Your Build in the L2MB Sprint 1 course while the DAT01 screenshot is built from the data provided by Anaplan Academy. I would have thought since they're both the starting point…
-
3.3.7 Activity: Add DCA to Inventory Ordering (Level 2 Sprint 3)
Hi! I kind of understand how this DCA works, because it worked while I did Sprint 2, but here not really.....iI tried to review previous lessons but it didn't help much...I'm still missing something....May be I missed some important info from lessons before... Also my results do not match with picture and I'm not sure what…
-
Level 2, Sprint 3. INV01 & SYS01 booleans (IF NotX... vs IF NOT(X)...)
Hi Community I'm not stuck, but I'm on the Inventory Ordering section, and I've a query about the SYS01 Time Settings By Week Booleans needed to run the INV01 model. 'SYS01 Time Settings By Week'.'First Week of Timescale?' has been created (using ISBLANK(PREVIOUS(Date))) and then the 'SYS01 Time Settings By Week'.'NOT…
-
Level 3 : Sprint 1
Hey, Its regarding Level 3: Sprint 1 : User Story says " Import the Financial Forecast data from the Level 1 FP&A model" but I do not have the Level 1 Model in my work space and download the Level 1 as per the instruction given in the course but unable to identify the correct module in Level 1 contains the Financial…
-
Exam 3 - A 2019 Actuals
Hi, I successfully loaded the provided 2019 Actuals file and updated the Sales Planning model and I am still getting incorrect answers for the first 2 exam questions which are based on this file. I hit every check point in the Level 3 lesson sprints and successfully loaded the file, so I'm not sure why my numbers are off…
-
Level 2 Sprint 3 Stock Exceptions Review UX Page
I am getting odd numbers on the Stock Exceptions Review UX page. I don’t think these numbers are accurate. Any idea how to normalize them? Thank you:)
-
Level 3 Sprint 1 user story 1.7-1.10
My Approach is - calculate Redistribution Factor based on initial Account sales target,Hold and Override Value in TAR03 Country Account Calculation Module, and then use the Factor in TAR02 Account Review module but when I am trying to Access the Factor line item for calculating Final Sales Target with respect to country in…
-
Level 2 Sprint 3 INV01
I am at the point where I am comparing my INV01 data to the Anaplan lesson example and my numbers aren't matching. I have a couple of questions about INV01. For Beginning Inventory: My numbers are good until week 4. Then I realized that when triggered the PO Submitted boolean, it showed up in the confirmed PO line for the…
-
Talent Builder Beta Access
Hi there I have registered for Talent Builder free 90 days beta access and was able to complete Level 1 and halfway through Level 2 certification. Unfortunately, I wasn't able to complete it within the allocated time. Would like to find out what are the options for me to complete the pending Level 2 certification. Should I…
-
Level 2 - Sprint 1 User Story 1 - Create Process - 5 Load Geographies
Hi In creating the 5 Load Geographies processes, the Actions to be included are 5.1 to 5.5 below. In the Actions panel, the Actions do not have 5.4 and 5.5. Kindly refer to the screenshot below. Is the course referring to SYS06 and SYS07 as 5.4 and 5.5? If so, are we to rename them and then include them in 5 Load…
-
L2 Sprint 2 - 2.3.8.4 Formula to the Growth % Line Item
Hello, I struggle with building formulas and would greatly appreciate any help. I am stuck with last part of the activity where I have to convert DEM01 Volume Growth Rate % (monthly) value to weeks. Being a new learner, I am not sure if the formula is correct because I am getting zero percentage across the periods. If…
-
Starting Level 3 - How much space I need?
Hello, I am going to start Level 3 and I would like to know: How much space do we need? Do we use Level 1,2 models ? If so, is there a possibility that we can take a standard base model from somewhere where we know everything is 100% correct. There could be a difference in formulas we use vs what was expected
-
Level 2 Sprint 2 - DEM03 Demand Forecast Module
Hi - I've been ploughing through sprint 2 and I have over looked most of the guidance for these formula - how close am I?
-
Level 2 Sprint 3 3.5.4.2 Create Distribution Center Capacity Module
Hi! I am having issues with the formula for Total Beginning Inventory in INV04 Distribution Center Capacity. The formula I have used is 'INV01 Inventory Ordering'.Beginning Inventory[SUM: 'SYS08 SKU Details'.Distribution Center] but it only returns zeros instead of the correct amounts. Any idea why would this happen…
-
Exam 1 Retake
@noelle_murphy Can you restart my exam attempt. I took it before accessing the exam review. Thank you, Ian
-
How to get job for anaplan L1 fresher In india
Hi, Do we get job after completing L1 for fresher ? Company Wants experience person only they don't want fresher then how we will get experience. Is there any chance for fresher also in anplan / (EPM)
-
Sprint 2 Question 6
Hi, I am unable to select an option for question 6 in sprint 2. I press the REVIEW PERMISSION DESCRIPTION after that I press CONTINUE and then I cannot select any option Does anybody went through the same problem in the past?
-
Sprint 3 - 3.6.1 Create roles and test as end users
Hi can someone guide me with the step by step process of how to do this. i tried it and failed Regards, Ankita
-
Whiteboard activity - what to produce?
Hello, For the final Whiteboard activity, what are we meant to produce? Is it meant to be a copy of below ? By doing the above on our own, we reinforce the methodology in our mind, is my understanding correct?
-
Level 2 Conclusion - Local currency list
Hi , I am getting this error while importing local currency list. Regards, Ankita
-
Level 2 Conclusion - INV05 Shipping export view
I am not able to hide the code line item here due to this my import into OTH01 is coming wrong. I am getting an error everytime. Please help Regards, Ankita
-
Level 2 Conclusion INV01 csv file
I have exported the file but both files look little different in numbers. is that ok ? My file : Training file : Please verify. Regards, Ankita
-
Anaplan Way Online Training
Not so long ago I was able to start an online only version of 'The Anaplan Way' which didn't cost anything. There were quizzes to take, videos to watch, etc, similar to online level 1 and 2 trainings to some extent. Now it would seem the training is only available in person and for $1500? Hopefully I've just failed to see…
-
L3 User 1-3.png
Hi, Should User 1-3.png 4.7 Check You Build open?
-
Sprint 3 Stock Exceptions UX Page
1. I having having trouble with getting the time context selector in the UX Page. I am sharing my screen and how i selected Time . But time hierarchy is off. I cannot change it. So please help. 2. Also I can see all the SKU in third grid (created based on INV01). I read it on the forums its supposed to be that way. So am I…
-
L2 Sprint 3: 3.5.4 INV04 Distribution Center Capacity
Hi, I used the formula for calculating total beginning inventory by referencing to beginning inventory in INV01 module and summing it by using Supplied by in SYS08 module but I'm getting negative values for total beginning inventory. Couldn't find out what and where I went wrong as the formula seems to be okay. Can someone…
-
Sprint 3 Dat03 Historic Volumes
I have done till half of Sprint 3 and was checking my data back . I found my DAT03 Historic Volumes Module are missing the forecast years. It is having value only till year 2019 and nothing further Earlier everything was working fine. Checked in history also , all looks good. Please let me know why this happened. I am…