Model Builder
Discussion List
-
Build Anaplan Line Items by Just Asking Claude. But What Happens to Your Data?
I asked Claude to add line items and a formula to a planning model in Anaplan, and it did the job in a few minutes from plain sentences. No special add-on, no clicking through menus myself. That is exciting, and it raises the question every team should ask first: what happens to our data? The short answer is that it…
-
Unable to delete Switchover in Versions for Level 1 Exercise
Hi everyone, I am doing the Level1 Model Builder exercise and in the Versions we are supposed to delete the Switchover. But i am getting the following error: anaplan.gridlet.GridController#beginBulkDelete (after force load)You may want to try the following Close this dialog and continue to use the application. If this does…
-
Create a Boolean-formatted line item to select the first week of the timescale (Year)
Hi everybody! Can someone help me with this simple excercise from level 2 please. I need to create a boolean line item that flags the first week of the time range (Year). Thanks in advance!
-
Need Some Checklist or Steps to be performed when rollingout a new anaplan model for specific new re
Hi, our users have successfully tested the required functionalities in the UAT environment, and we are now planning to roll out a new Production environment for them. Could you please guide us on the necessary steps and prerequisites for setting up the new Production environment? Thanks in Advance
-
level3 sprint1 4.6.5 Sale Planning Model: DAT02 module
Hi, I am now struck in below excercise 4.6.5. As As per the ask i have done the below steps -Created a DAT05 module in datahub with Historic sales revenue for 2019 -In Sales model i have created DAT01 for Historic revenue and imported it from Datahub model -Created DAT02 PY revenue to CY. And used the below formula for…
-
Anaplan AI Gateway vs. CoModeler: same AI wave, very different jobs
The one-line difference CoModeler helps you build the model. AI Gateway helps you ask questions of the model. What CoModeler does CoModeler is an AI assistant inside Anaplan for model builders. You describe what you want in plain language, for example “add a headcount module by department with a monthly roll-up.” It…
-
Workspace hygiene recommendations: A readiness guide for Anaplan AI Gateway
Anaplan AI Gateway (“Gateway”) is a supported, governed MCP (Model Context Protocol) interface that connects external LLMs, assistants, and agents, such as Claude, Gemini, and Microsoft Copilot, to your Anaplan models. It lets your teams’ LLM clients query your Anaplan models directly. This means users can ask questions…
-
What to know when moving models across workspaces: A practical checklist
You may be considering moving a model into a new Workspace for several reasons. On the surface, a cross-workspace move looks like a simple copy, but the result is a new model with a new model ID. It loses its ALM revision history, and you need to review anything that pointed to the original: integrations, ADO, app pages,…
-
Applying Formulas to Specific Rows in a Flat List While Keeping Line Items as Columns
This question may have been asked and answered before, but I’d appreciate your thoughts on the following scenario. If a Flat List is used as the rows in a module, is it possible to apply formulas to specific rows within that list? In the example below, Revenue and COGS are pulled from a DAT module by using a SYS module…
-
Can import actions be restricted from updating read-only items in a custom version list?
Hi everyone, I have a custom list that represents versions. Users need to be able to see all versions in UX pages and reports, but one specific version (Version 1) should be read-only. The problem is that when users run an import action, the action opens a dialog where they can select the version from a dropdown. Even…
-
How do you decide when an Anaplan module has become too complex?
As an Anaplan model grows, modules can gradually accumulate more line items, formulas, and business logic. At some point, splitting a module into smaller ones might make it easier to maintain, but it can also introduce additional dependencies. I'm curious how other modelers decide when it's time to split a module rather…
-
Anaplan P&L Design: Should I Use a Flat List for P&L Rows and Line Items for Reporting Columns?
Hi everyone, couple questions here: I’m building an Actual vs. Budget P&L reporting model in Anaplan and would appreciate advice on the best structural approach. I’ve attached a screenshot of the desired layout. The report needs P&L items as rows, and the following as columns (line items): Actual Budget Variance $ Actual %…
-
Ran into two issues this morning with selective access, and no items available for selecting
Hello, One of my models is generating this issue: "PLANNED Position # has selective access enabled and you may not have been granted access to any items." When I try to adjust the selective access, it then says "no items to select". I'm unsure what caused this issue and how to correct it. Any help sincerely appreciated.…
-
Polaris: Line Item Subsets cause severe size leakage
We have discovered that Line Item Subsets cause unexpected behaviour in Polaris: their mere existence adds significantly to model size and calculation demand. This overhead is undocumented (it appears in neither Anapedia nor the Planual) and is not visible to the model builder during building. The only way to detect it is…
-
Introducing Anaplan Toolkit: side panel for model details, exports and model lock tracking
Hi everyone 👋 If you build or maintain Anaplan models, you've probably hit the same walls I kept hitting. Some basic questions about a model's structure have no single screen to answer them. You end up clicking through modules and pages one by one, or writing API scripts just to get a list. These were the gaps that…
-
How can I calculate % of Revenue dynamically for each P&L line item in an Anaplan reporting module?
Hi everyone, I'm building an Actual vs. Budget P&L reporting module in Anaplan using a Line Item Subset (LIS) to display the P&L items. I would like to extend my report to include three additional columns under a "% of Revenue" section: Act % = Actual amount / Actual Revenue Bud % = Budget amount / Budget Revenue % Var =…
-
Anaplan Estate - turning model exports into practical improvements
Greetings, fellow Anaplanners. I’ve always wanted something that could take thousands of line items and help me work out where to start improving a model. So I built it. It’s called Anaplan Estate. Give it your Line Items and Actions exports, and it brings optimisation findings into an action plan, with evidence and…
-
ADO Benefits
Direct source integration- Connects directly to source systems, removing theintermediate Data Hub model as a staging layer. Cutsdown the need for ESB for some jobs (i.e. Snowflake &AWS S3), not all. Transformation inside Anaplan -Data transformation and ETL activities run natively inADO — no external tooling or…
-
How should I structure a Line Item Subset (LIS) module to display Actual, Budget, and Variance
Hi everyone, I'm working on recreating a P&L reporting model in Anaplan and would appreciate some guidance on the best way to structure the underlying modules. In my current setup, I have a Line Item Subset (LIS) containing P&L line items, which I am using in a reporting module to display Actual, Budget, and Variance side…
-
How Can I Recreate Anaplan’s “Reporting Tips & Tricks” Showcase Model for Learning Purposes?
Anaplan Modelers: Has Anyone Recreated a Showcase Model for Learning Purposes? One of the most valuable learning resources I've come across is Anaplan's Modeling Showcase. It features sophisticated, real-world model examples that offer an incredible opportunity to learn how experienced model builders structure their…
-
Level 2| Sprint 1| 1.4.3.2 Import Data & Add Formula; Error: Item Not Located in P2 Products Family
The blueprint view screen shot for SYS12 SKU Details is shown below: The P2 Product Flat screenshot is: The P3 SKU Flat screen Shot is: The error detail message is: And the SYS12 SKU Details screenshot is: Any suggestion/advise what I am doing wrong. Thank you.
-
Talent builder program - Formulas and functions model
Hello everyone, Has anyone (from talent builder program) been able to be granted page builder role and download the formulas and functions app ? Cannot and I would love too. Thanks a lot
-
What's the #1 bottleneck in your Anaplan build cycle?
What's the #1 bottleneck in your Anaplan build cycle right now? A. Model documentation B. Onboarding new builders C. Optimizing slow formulas Curious which one takes the most time for your team and how you're currently addressing it.
-
Anaplan Offset Formula is looking for value outside timeranges
Hi, I'm using the OFFSET formula, where a calculated and number-formatted field determines how many previous weeks the formula should look back. Based on this value, it retrieves the corresponding week's data into the output line item. The formula works correctly for some products; however, it fails for others. The issue…
-
"Failed to retrieve field list" error when importing saved view across models
Hi everyone, Has anyone run into this issue before? I am trying to import data into a Marketing model list using a saved view (Update B3 Product Dist in Mktg) from a source model (FinancialPlanning_Dev_Polaris). However, when I try to set up the import action, I get the following error: Select SourceFailed to retrieve…
-
L1 Model Building 11.3.4 — Forecast and Actual showing identical values, no changes occurring
Hi all, I'm working through exercise 11.3.4 in the L1 Model Building course and running into an issue with the Forecast vs. Actual logic. I've set up the Forecast line item with a formula referencing the Current Period (using CURRENTPERIODSTART/time settings as instructed), so that it should pull Actuals up to the current…
-
Building a User-Filtered Export from a Module with Multiple Selectors
Good morning everyone. I need to build a module export with some specific requirements: users can select a currency type (USD/Local), Salary Type (1 or 2), Nomina Type (1 or 2), and Version (Forecast, TS, Plan). Currently, each of these filters is driven by an independent system module published in the NUX, each…
-
🚀 Stop Writing Nested IFs in Anaplan - Use LIS Instead
If you’ve built complex Anaplan models, you’ve probably written formulas like this: IF A THEN IF B THEN IF C THEN Value1 ELSE Value2 ELSE Value3 ELSE Value4 It works. But it’s slow. It’s hard to debug. And six months later… even you won’t understand it. Let’s talk about why nested IFs hurt performance and how Line Item…
-
Talent Builder Graduate Mini Resume - Arshaan Durrani
Name: Arshaan Durrani Location: Oakville ON, Canada Certification: Anaplan Certified Professional Model Builder (L1,L2, Anaplan Way) SAP Certified S/4HANA Financial Accounting Associate Tableau Desktop Certification SQL Developer Educational Background: Wilfrid Laurier University- Bachelor of Economics Profile Summary:…
-
Mark list items as subsets with import process.
How can we create an import action for production lists where we can import data and mark it as a subset while importing so that only selected list items get added as production data, and we dont have to mark each item seperately, so that we're able to use these list subsets as dimensions instead of the whole list in…
Upcoming Events
-
Unlocking the Value of Community with Anaplan Community Bosses
Join us for an exclusive professional development roundtable designed to celebrate, connect, and elevate our premier platform advocates: the Anaplan Community Bosses. The Community Boss program stands at the very heart of our ecosystem, highlighting leaders who dedicate their time to guiding peer model builders and…
-
Designing for Fit, Utility, and Practical Guardrails with AnaplanXL
Join Anaplan experts for a practical introduction to AnaplanXL (AXL), the Excel add-in that connects Excel grids directly to governed Anaplan data. As the first session in our technical series, this event is designed to help: Model Builders understand the fundamental purpose of AXL: what AXL does, the basic guardrails for…