-
CloudWorks - Ability to add up to 50 steps to the Integration flow
As a tenant administrator and model builder, I scheduled 39 CW processes during the nightly integration. It's pretty hard to schedule them separately one after another, so an integration flow would be a lifesaver, but now you can only add 10 steps to one integration flow, so the new mechanism doesn't solve the problem…
-
Visibility of whether a line item is referred by an action
In the blue print view we can only see if a line item is referred by formulas. If we similarly had the visibility of whether a line item is referred by actions, it would be very helpful.
-
Ability to copy paste objects in the designer mode
Presently to copy paste objects such as grids, cards, text boxes etc, we have to publish them as templates and there is no straight forward way to simply copy and paste. Having this functionality would help a lot.
-
Ability to refer to the total of all line items in a module
Presently to get a total of all line items in a module we have to create another line item and manually add the other line items in the module. This is both time consuming and error prone. Also if there is ever a addition of a line item in the module the formula for total has to be updated. Instead if we had a simple…
-
Increase the limit of list item beyond 999 999 999
As a anaplan coe lead, i need to enable more complex and scalable use cases into anaplan and integrate seemlessly with high volumes system working with event or log based architectures. To cover these, one limiting factor is the hard limit over the 1billion minus one on lists. I d like to have this limit raised to higher…
-
Current page option in the context area for a context selector filter
I would like to apply a filter to a context selector to use a filter dimensioned by what is also another context selector and wanting the filter to update with what is chosen from that other context selector. For example: I have a list as a context selector and time, which I only want to show the items chosen in the list…
-
Ability to auto-name PDF based on context when exporting from Management Reporting
When exporting a PDF - the name is always the name of the page as it appears in the app. It would be good if you could configure this so that it recognises the context of what you were exporting, but could supplement this with text. E.g. if you were exporting a board pack, you could select the context of "Europe" and…
-
Being able to show/hide columns on the face of a board/sheet
Despite enabling end users to do their own boards/sheets - would be great if it was quicker for them to do right-click show/hide like you can on the design section (and could do in the *cough* classic pages. I know that you can also use the show/hide icon and/or a filter module but for that quick view would be something…
-
Enhance Users list with Subsets by Role/Manual/etc
We use users list in many of our filters modules/line items but the usage of the filters might be only for some set of users. We don't have option to use the relevant people only in users list for these modules. Which will result in more sized modules. Having option to manage subsets in users list by role or by manual or…
-
Trigger an action with a boolean
It would be nice if we could trigger an action and/or clear a line item based on a checkbox. For example when overriding values, we often use an "Override?" boolean to make a line item writable. If the user unchecks it he expects for the input to be cleared/reset. This can be achieved with an additional action, which is…
-
Allow .tsv files in the Cloudworks UI (again)
The Situation Currently we import all our files as a tab separated file (tsv), bundle a set of import actions in a process and orchestrate these processes trough Cloudworks Integrations. Tab separated files are one of the first possibilities in the file options: To indicate such a file is tab separated all our files are…
-
Ability to control available features for cards in New UX (maximize, comment, export etc)
Description: as a page builder, I would like to have a control over available actions for each card. I should be able to disable or enable this features (at least for text cards). Benefit/use case: very often blank text card without background is used as a placeholder. I would like to disable all features for those…
-
Enable MFA for secure login to Anaplan
Hi I would strongly like Anaplan to enable us to require MFA for login to Anaplan. Currently we have Anaplan integrated with Azure for SSO logins for internal staff but for external users it is username and password only which is a real worry. As we all know MFA is an absolute must and we would really appreciate this being…
-
New UX Gantt Chart: Show Dependencies with Arrows
It would be great to show the dependencies between particular tasks in Gantt charts with connecting arrows between tasks. Something like this: You would need a way to connect the particular tasks to each other - i.e. specifying the dependents or precedents of each task. At the moment dependencies are only conveyed through…
-
Ability to Show History in NUX While Viewing Drill Down
Currently users are able to self-service via NUX to show the history of a cell's values. This is not possible if the inputs are indirectly referenced and not available on a dashboard. Since users are allowed to show history when viewing a grid on a dashboard, the users should also be able to show history during drill down…
-
Module Lines System Generated 'Created by' and 'Modified by' Detail
All module lines should include system generated "Created By" and "Modified By" detail for audit trail, compliance, and support reference. It is not always clear as to whom created or modified a line in a module. If a consultant or contractor is making changes to lines, the only way to find that detail is by combing…
-
Saved View Utilization Audit
We're currently updating our Saved Views naming conventions and below is an initial draft. Part of the intention is to make it clear how any given saved view is being utilized. It would be great if, when auditing Saved Views, we could see how they were being utilized automatically. (2 examples below) Because of this lack…
-
Add back the 'Used in Dashboards' reference for Modules (with NUX)
With the NUX in place and being the standard for dashboarding, it would be good to have the ‘Used in Dashboard’ reference working again within the Model. This would be good for the transparency/auditibility of the model, for all users. With the Classic UX, it was easy to see when a Module was used in any of the Dashboards.…
-
Anaplan tab in SalesForce user mapping based on email rather than User name
We use a different user name between SalesForce (firstname.lastname@company.com.suffix) and Anaplan (firstname.lastname@company.com). Therefore it is not possible to have an Anaplan Tab in SalesForce application matching user names in both applications. Can you please add the possibility to map between email adresses…
-
Hide Scroll bar on new UX Dashboard Cards
Hi! I'd like a toggle option to hide the scroll bar on a card. There are instances, for KPI cards for example, where when I make the card the size I want and the data is displayed correctly but there is a unnecessary scroll bar. I either have to make the card larger, taking up real estate on my UX, or leave the scroll bar…
-
Zoom Chat Integration
There is an integration for Slack but not Zoom Chat. I can connect you to Zoom's engineering team if needed.
-
Tableau to Anaplan Integration
Hi Everyone, I was doing POC for Integration between Tableau and Anaplan, where we export the data from Tableau as a file(.csv) and load the file into Anaplan. Thought of sharing my approach here. Below are the prerequisites we would need to proceed further. Download the latest Tableau Desktop from the Tableau Website and…
-
First Model Copy Throws ALM out of sync
I just encountered an issue where I made a model copy of a deployed model in production (the first model copy of production made) and it threw ALM out of sync. A Model copy should not operate as a new revision tag that makes PROD out of sync with DEV.
-
Keep deleted Pages for 30 days
Add the ability to "Restore Deleted Pages" for each app up to 30 days after deletion. We've ran into this issue a couple of times where someone deletes a page and the page needs to be recreated completely which is time consuming when the page is heavily customized and not just a module view dropped in.
-
Formatting options for excel export
Hi, It would be great if we can have formatting options to separate subtotals, totals, list items which enables readability in excel exports. Thanks, Aravind M
-
Email notification on UX requires an update!
As a model builder, I want to configure "Notification" action more: Currently, I can only enter the Title and Message as a template of the letter which is going to be sent via the Notification button: Both sentences will be shown in the body of the letter while the subject of the letter will remain the same even if the…
-
Manual Input for Recipients of Notifications - CW
At the time of writing of this post, it's only possible to choose from a limited list of recipients who receive the Notifications of CloudWorks integrations. However, it would be very convienent to be able to manually input email adresses of the recipients. This would allow to send the notifications directly to Team…
-
Conditional Formatting using "Relative Values" and Operators
It would be nice to have the option to use operators in conditional formatting. For example, at the moment, we have the option to decide which line item we would like to apply the conditional formatting against, and the option to use values from another, or the same, line item. However, we need to determine the "absolute"…
-
Block ALM
Hi Team There are instances where we do not want the production model to be updated using ALM. This is required when we have any model developers working on the same model, and don't want any of them to accidentally move changes to PRO. With this option we are better prepared for risks that may occur for data loss or…
-
CW settings report
It would be very convenient to export all CW processes to a table to quickly check settings between processes, without waiting to load, because now you have to click on each process and wait 2-3 seconds to load the fields in the first tab, then wait again for the second tab, then click on the next process and wait again.