-
1 4 3 2 Import Data and Add Formula
I have reached to this lesson and have been unable to import the csv file 'SKUs.csv) into SYS12 SKU Details module. Can someone advise if I should have time series as the column in the SYS12 module and should I see Time as the target (which in my opinion, should not see Time as source)? If they should not be here, how…
-
Anaplan model building level 1 virtual class
Can anyone update me on when the Anaplan model building level 1 virtual class will start?
-
Level 1 Model Builder Assessment - Activity 4
I'm hoping someone can assist since I'm not able to move on and am unable to figure out what I'm doing wrong. I have imported data in to the SYS08 Employee Details module successfully, but no data shows in Role. I have changed so many things based on other strings I've found, but nothing has helped. Any assistance is…
-
INV01
INV01
-
L2 Model Building Sprint 1 Activity 1.5.6: Facing issue in importing data
Hello, When importing data in DAT03 Historic Volumes Module, which contains week wise volume data of the previous year (time ranges was created, and included as line item in the module), I am facing the following error: Import into DAT03 Historic Volumes module unsuccessful: Ensure the column headers in the import file map…
-
Help with Level 3 MB Sprint 1 Activity 8.4
I'll be kind of vague, but I was validating my work as instructed in the training while doing a build portion. The screenshot I'm validating up against has countries in rows and segment in columns (39 cells). It looks like everything I've built matches up except for two cells specifically in the same country (Mexico) and…
-
Employee detials
Hi Team, Can you please provide me with download to the link for Employee+Detials+By +Role csv from Level 1 exam. My one was opened and I would like to get it to practice before I have another attempt. thanks Regards, Aye
-
Import Shipping Expenses into OTH01 Module
Hi, I am trying to import shipping expenses into OTH01 Module but I am doing some wrongs, where? Here are my screenshots: Yes, I see that the capacity doesn't match and tried hide it but it doesn't work still. Please guide me! Mark
-
2.3.9 Activity: Historic Volumes to Baseline Forecast
Hi, Some values should be in 'Offset Volumes for 1st Forecast Year' line, but nothing! Where am I doing wrong? Thanks, Mark
-
3.5.5 Activity: Create Distribution Center Summary UX Page
HI, struggling a little to create below view I am able to achieve below using DAT01 but not able to remove the summaries.
-
Level 3 Sprint 2 : Assign Action
Hello, I am trying to set up the Assign action with filter by Country & Segment. I have the two list formatted properties in the G4T Territory>Account# list, but I'm not getting any option to select these while setting up the Assign action. Can someone help me understand what am I missing here? Thanks! Richa
-
L2 Model Building - Conclusion Exam: Upload Supply Chain Model History
Hi, i'm trying to complete the L2 Model Building Exam and it is required to upload the supply chain model history. I have issue since i transferred my model to another workspace and it makes the history renew on the new workspace. How could i solve this? Because i can't upload 2 files in the fields. Thanks.
-
Activity 3.3.5.1 Create Inventory Ordering Module - 0 as shipping time
Hi, I am having issues with getting the correct values for Shipping Time Weeks in INV01 Inventory ordering model. The formula used for this is 'TRA01 Shipping Metrics by Week'.'Shipping Time (Week)'[LOOKUP: 'SYS08 SKU Details'.Product, LOOKUP: Shipping Method] and that should be correct I think. See below screenshot for…
-
Not getting same values in rep04
Can anyone help having issue in getting different value in rep04
-
Not able to find REP04 module in ux page
Tell me how to get REP04 module in ux page option . REP01 , REP02, REP03
-
Activity 3.3.5.1 Create Inventory Ordering Module - multiple issues
I am having multiple issues with the formulas in the Inventory Ordering Module. First of all, I don't understand why I Have 0 as Beginning inventory for Nutzo Bar_En with the formula IF 'SYS01 Time Settings By Week'.'NOT First Week of Timescale?' THEN PREVIOUS(Ending Inventory) ELSE 'DAT01 Beginning Inventory'.Beginning…
-
12.4.2
Create saved view for country margin but the problem is now I have notice that REV01, 02, & 03 Modules don't have any data for FY21 so the model don't look the same when I check my work, any suggestions?
-
L1 Exam Activity 4 Import Error
I am getting error codes when importing to the EMP03 and SYS08 modules as shown in the screenshots. Can anyone point me in the direction of where I went wrong and/or how to fix it?
-
13.6.5 Activity: Add Column Chart to Margin Summary Page- Filter Issue-Forecast months only
Hi, In the 13.6.5 Activity: Add Column Chart to Margin Summary Page, When applying filter am not able to find the Forecast months only, attached screenshot for better understanding. Not able to understand where i am going wrong Thanks in Adv Tej
-
3.3.3.2 Import Data into DAT04 module Problem what to do
-
3.4.4 Activity: Create Stock Exceptions Review UX Page - Cannot Apply Conditional Formatting
Hi everyone, thanks in advance for any help! I am trying to apply conditional formatting to 3.4.4 Activity: Create Stock Exceptions Review UX Page. I believe I have built the grids correctly, but this may be the problem. I used custom views from Module INV02 for the Country and Product Family grids. I used a custom view…
-
L2 Conculsion Exam Q6
Hi Community, My DEM04 DEMAND EXPORT module has Cell Count of 776,882 cells. I can't get it lower. Can you give me a steer on what I'm missing here please. Thanks, Chris,
-
2.4.7.1 Create Demand Forecast Grid UX saved view_unable to apply conditional formatting
Hi, I am not able apply conditional formatting to get the result. Could anyone please guide me. required output - Applied conditional formatting - Got below output - Thank you,
-
13.6.3 Grid Card - Missing FY21
I am having a hard time getting the results, displayed in the training module screenshot. I did all the steps and was all to publish the grid card but it is missing the FY21 months/data. FY 20 is present but for some reason the FY21 data is not displayed. When I checked the forecast period view I saved I see that FY21 is…
-
2.3.10 Activity: Create Demand Forecast
IF 'SYS01 Time Settings By Week'.Current Period? THEN 'DAT03 Historic Volumes'.'Offset Volumes for 1st Forecast Year' ELSE 52 Baseline Forecast formula 'DEM02 Volume Growth Rates by Week'.Growth %[LOOKUP: 'SYS08 SKU Details'.Product Family] Growth % formula Baseline Forecast * (1 + Growth Rate %) Default forecast formula…
-
2.3.8.4 Create DEM02 Volume Growth Rates by Week module
Is the formula correct what to do further
-
2.3.9.1 Import data into DAT03 Historic Volumes module
what to do plz help
-
12.4.6 Showing specific line items
Hello, I'm having a bit of trouble on the second half of 12.4.6. My problem is I am not sure where to go in order to filter the specific line items as it specifically states there are no filters. Screenshots below. It asks: * Show only the following line items:* Headcount * Salary * Bonus * Car Costs * Phone Costs *…
-
2.3.10 Activity: Create Demand Forecast - Workspace Size Limit Issue
Hi, I'm trying to make a new module with these required lists, but I couldn't do that apparently due to the workspace size limit. Could you guys please tell me what to do? Thank you in advance.
-
EMP02 Employee Expenses Formula is not working
Hi - I have been trying to calculate bonus, car, phone, and medical costs and the function i input gives me an error message. I am not sure what i am doing wrong. Can someone help me please? Formula for Bonus: IFEmployed?THENSalary * 'EMP03 Employee Drivers by Role'.Bonus % [LOOKUP: 'SYS08 Employee Details'.Department,…
