New

Switching between multiple languages
We need allowing end-users to switch between different languages ( Japanese to English, etc.) for display name of lists, line items, value, glaph, etc. In particular, it would be helpful to have the ability to set the display name of multiple languages to list or line Items so that end-users can switch languages. Thanks!
Developers need visibility when view is used in actions or UX pages
For the developers, it is nearly impossible to be sure that by editing a view or line item in a view it will not break any actions. It would be good to have a warning message when a view or line item is used in an action. It would be also great to have quickly accessible info on what views are used in actions and UX pages…
Publish Postman API Collections for various Anaplan API Categories
It would be handy if the various API documentations outlined in is accompanied with its corresponding Postman collection like the one below . Currently I'm unable to find the Postman collections for ALM API and CloudWorks APLI
Remove gap in Column Charts when row is a list
I'm finding that when you use a list as row in a column chart you get a gap at the edges (colored chart below) but if you pivot the dimensions such that you have line items as rows the gap is removed (2nd chart below). Visually the gap is just a nuisance really and hoping this is a quick fix for Anaplan to address.
Forms dependent dropdown by calculated line item
This information was shared in the August 2023 release notes. Dependent dropdowns in forms: Page Builders and Model Builders can leverage relationships between different lists when creating new items using UX forms. No additional modeling is required as forms will automatically respect the rules built into your line items.…
CloudWorks - Page Readability
Hi everyone, Is it only me or does the CloudWorks Page - Integration & Processes Page in particular - lack in terms of readability in your opinion? What I mean by that is, there are presumably cases where users have lots and lots of Integrations & Processes listed one after another and it's pretty cumbersome to manage them…
Dynamic Time ranges
Hi Team, I have seen similar ideas already suggested about this topic, but are a little bit too specific in my view. So I hope this one is perceived as useful by the community. ISSUE: At the moment, Anaplan's time ranges are static, which means that they will contain the same set of years while your current period and…
Pull data from multiple models into one report in New UX
Hi, It would be very useful to pull data from multiple models into the different slides of a report in the new UX. For example we have separate models for daily sales/product performance, Finance (P&L etc) and HR (Headcount). Being able to produce a single report that contains data from each of these models would be great…
Basic Calculations in Front End
It would be very helpful if it would be possible to make basic calculations (plus, minus, variances,..) in the front end.
NMX Idea: Highlight Referenced by line items within the same module
As a model builder, I would like to distinguish quickly which line items are referring to the active one. This will help in situations where there are too many references and it is hard to keep track of them when auditing. It will bring more transparency to data flow analysis. Also, it can highlight potential circular…
Excel Add-in
The Excel Add-in for Anaplan is a key feature of the system, although all organisations would like to steer away from using this sometimes this is the easiest solution to a problem. I have used similar systems to Anaplan, Hyperion, Board, Cognos and TM1 and find this area very inflexible and lacking compared to its…
Anaplan links to open Anaplan App when used on Mobile Device
Many Anaplan users request being able to link directly to pages in the app. Even when opening a link on a device with the app installed, it will go to the browser version. It makes users much less likely to adopt Anaplan in cases where they prefer the app and need to share links for specific pages. It would be very…
Maintain Formatting in Data Export
When exporting data from Anaplan to Excel, it would be great to have the option to maintain certain formatting options such as wrapped text and conditional formatting.
Context Selector: Selecting Multiple Items at once
It would be very helpful, if you could select different items from a context selector at once and Anaplan should show an aggregate value of the selected items (e.g. Years: being able to selct multiple years at once in a grid would enable for instance in reporting to show 2023 and 2024 and the difference between the years.…
Search option in manage models pane
As a model builder its difficult to look for a particular archived model as there is no search option. And also when we click on archived models its a mix of standard & archived. For example we have more than 100+ models(archived+standard) in our workspace. In such cases its too difficult to search for an archived model…
Option to Align Card Contents
It would be very helpful to be able to right, left, top, or bottom align items within cards. This would apply to actions, images, etc. that currently auto align to the center of a card.
Synchronizing Master Data Names Based on Other Dimension Names
Is there any possibility that could automatically synchronize the name of master data elements based on the names of items within another dimension. Essentially, when an item name is change in the top selector in one dimension, we would like the corresponding master data name in another dimension to be updated…
Enabling Total Value Display with Selective Access
When we enable Selective Access for a dimension or a list, it allows us to control user access to specific elements within that dimension. I came across to one scenario where I need to see the total value of selected list, even when Selective Access is enabled. In other words, I should be able to view the aggregated or…
Search possibility when adding selective accesses for users
It is impossibly hard to navigate and find and select a selective access item for a user in user management when the hierarchy is complex and the selective access list has too many items. Is it possible to implement a search functionality for a selective access lookup screen?
Anaplan Maintenance Break Banner for the User
Is there a way to have some banners in Anplan during the routine maintenance from Anaplan saying something like "There is currently maintenance ongoing…" or "There is an unexpected maintenance break, please follow this link for status…."? So that the users do not get confused as to why they are not able to log in or access…
Excel Add-In - Option to Switch to design view
Please could you create a new button/feature in the Excel Add in to allow switching to design view. Excel is a great tool for presenting and autosizing column widths and for working on Module layouts and for sorting and filtering relevant columns and rows during a module build. When I do a rebuild a module. I often need to…
90 day free trial for academic purposes
kindly provide the 90 day free trial for learning and academic purposes
Reset of End User Card Specific Sort/Filter when feature is enabled/disabled
Currently experiencing issues with end users related to card specific filtering/sorting. Previously, the sorting/filter features were enabled and end users were using them. We then moved to using modules to do syncronized filtering on all cards and disabled the card specific sorting/filtering. Finding out now that the end…
Search Option for Filter Line Item to Find
Hello Community, I would like to give one suggestion/idea on to provide search option while applying filter on module. This thought came when I'm scrolling to find my filter line item out of n no.of line items in the module. I hope this makes easy modeling/avoid scrolling a lot while applying filter.
Optimizer Predictability & Explainability Challenge
We tried leveraging Optimizer to resolve issue for our business requirement. It did not work well for us due to below reasons. We are opening this ticket asking Anaplan to look into enhancing the Optimizer Predictability & Explainability. Here is our note from the development team: Regarding the optimizer predictability…
NUX - Allow List Attributes/Properties to be included as separate row headers
Can Anaplan provide functionality that allows Grid with Time dimension to also display Attribute data for the list item? This reduce the amount of cards needed on the dashboard, improves useability Example screenshot below.
Specific company logo and/or header color
It would be nice if we could add a specific company logo either in the white navigation pane, either in the top blue navigation header (in this case by replacing the Anaplan logo or place it next to it). A bonus would be to select a specific color this blue navigation header. It would avoid adding the logo as an image…
New UX: Ability to update the color of header bar's and other action cards
Hi, It would be great to have the ability to change the colors for the below: * Ability to change the color of the bar's that appear in the New UX at the top from Blue to any other color as per user's choice * Ability to change the color of the action cards in the New UX from Blue to any other color as per user's choice…
NUX Show/Hide Function Enhance
In NUX, Show/Hide (Eyeball icon) Function controls line item, time or other dimension items to show or hide. When working on multi card dashboard, it is tedious to filter cards one by one. Can Anaplan provides centralized Show/Hide feature based on the line items available on the dashboard? So user can filter easily…
Make the "model open analysis" available
It is very common to face performance issues with Anaplan models. Examples are not lacking, you just have to have a look to Anaplan Community to realize it. Several “best practices” exist: https://community.anaplan.com/discussion/33530/oeg-best-practice-plans-this-is-how-we-model Moreover, a tool exists, the “Model Open…

New

Discussion List