-
New Best Practices article: The Importance of Building and Maintaining a Clean Model
All, Just wanted to share a new Best Practices article on The Importance of Building and Maintaining a Clean Model and please make sure you download the attachment where it answers frequently asked questions and what to look for. Link Thanks, Rob
-
Duplicate Data values
Hi Friends, Q1] What do we need to do, to avoid duplicate data being entered in Data Hub? Q2] Can we write any formula in Data Hub for concatenation, to increase performance? Does Data Hub supports formula or calculation?
-
Nested Sorting
Hello, I there a way/workaround in sorting a nested axis in Anaplan? Attached is the example module where I need to put the TOTAL LIST1 and TOTAL LIST2 at the start of each list. Thanks in advance for helping. Tom
-
Unable to Access L 2 Training
Hello, I started the L 1 training on the academy but then switched to an instructor led course for L 1. I completed the instructor led training. The L 2 training is currently grayed out, my guess is because it still shows I'm in the middle of L 1 training. Is there a way to access L 2? Thanks
-
August 2020 release
Hi Anaplan Community, Where can I find information on the flexible time labeling which has been released on August 8th 2020? Flexible time labeling: Workspace Administrators can label the models they build out by calendar year (CY) or fiscal year (FY), to better inform end users about the timeframe certain models…
-
Data Hub Optimize
Hi Friends, If the Data Hub size is huge, how can I optimize it? As it is taking a lot of time to get data imported into Modules. Regards,
-
Driver-based planning, connected to Finance app
Hey Anaplanners, I'm curious about best-practice for building connected, driver-based models. I have a an idea of how I'd do it, but not sure how others would accomplish the same objective. So, I'll present a very simple example to get the point across, with the objective of receiving feedback on how to correct / improve…
-
Need Formula help
Hi Please refer the screen shot attached. Within a parent,I want to sequence the column 'Structure Type' based on each unique Job Name.For example, for Job Name 318317,I have marked 1 and 2 for 317542. Need to know how to setup the formula for the column 'Structure Type' for this requirement. Thanks Regards Prabakaran
-
Formula assist
Hi, I have 2 lists: 1) LIst of Funds (P3) and 2) List of Fund entities (P4) whose Parent is P3. I also have a P3 details module that lists out the fund currency for P3 Funds. My issue is, I have a module (P4) which I'm trying to pull the fund currency from the P3 details module - i've tried using PARENT(ITEM etc, but…
-
Hierarchy Uniqueness - Non-Numbered Lists
Hi, I currently have a hierarchy with 4 levels (non-numbered lists). In our official hierarchy, levels 3 & 4 can have the same name, so we append a L4 to those particular items in Anaplan. Recently, I updated the process to pull the metadata from a different module in the data hub - but did not incorporate the L4 to the…
-
Line item formatting
Hi, Question please. Would like to ask if it is possible to have two formatting in one line item? for example (see ss below), the columns are line items and the rows are LIS. The GLA for 2018A and 2019B (9% & -3%) are percentage change variance while the Lease out rate formula is the difference of 2018A and 2019B (4p%ts &…
-
Formula error - dimension issue
Hi, Can someone assist with a formula error I'm receiving? I currently have 3 modules (see attached), and in the third module, I'm trying to calculate the number of meetings by entity and product. The error message I receive is: Dimension of mapping used for aggregation doesn't match any dimension of the source. My formula…
-
what is Hyper Model?
I read this news. https://community.anaplan.com/t5/Releases/Anaplan-HyperModel-Model-complex-problems-at-scale-and-adapt-to/ba-p/77929 In this article, many people comment that we can get more workspace 130GB to 700GB in Hyper Model. I don't understand what is Hyper Model. If we want to use Hyper Model, we have to pay…
-
Apply conditional formatting rules to multiple line items
Currently we have to build a seperate conditional formatting rule for each line item. It would be useful to be able to set a rule up and then apply it to multiple line items in a module
-
Subtotal in bottom right of Anaplan
Hi, I would like an enhancement made where, similar to Excel, when I highlight a series of cells with numbers in a column or row or both, I want a Total, Count, and Average to appear in the bottom right of Anaplan so that I can quickly look at measurements of the data I've selected in a module. Thanks,
-
New UX needs to have a multi-lingual user interface to allow non-english language implementations
Hi Anaplan, The New UX does not currently support a multi-lingual interface. Many of our clients are asking for this to be implemented. It would be really beneficial for many Anaplan Users across the world (Europe, Asia, Africa, South America) for the new UX and UI to support a multi-lingual interface. Great idea suggested…
-
Ratio formatting
Hi, Question please. I am trying to format the percentage change (in red box) with suffix of "pts" but when I click the percentage the suffix is disabled. I tried also using the Ratio in the Summary Method but still the same. How can I fix it? Thank you.
-
Best way to handle validity of products prices
Hello Anaplan community, I'd like to create a model that stores prices for my items, and the evolution of these prices. A few constraints though: * Prices can evolve with time, and the applicable price at one date can be different from the applicable price at another date. * Products don't change prices at the same time,…
-
Optimiser Time out error
Hi, I am running an optimizer with Time out limit of 20000 seconds.However post 60 mins it throws the following error: "The solver was cancelled due to timeout, please increase the solver timeout value to solve the problem" Does Anaplan has the limitation of only 60 minutes? Not sure what is the issue. Can anyone please…
-
DELETE DRAW PAYMENTS FOR AT JULY AND AUGUST
Hi. Dear Anaplan community. I am new here. I got something to solve and would like to ask for help. In ANAPLAN, there are set up automatic draw payments for Austria AT. This logic, was called off by the end of Q1. In the sales statement report, filtering the Austria AT, my colleague still see Draws for July and August. Who…
-
To build formula which is like PREVIOUS() but references a list item instead of time
Hi All, found out a work around for this, until Anaplan creates an in built function to fetch previous or next values in a list, without referring to Time dimension. Hope this helps Link to Anaplan Idea Exchange: https://community.anaplan.com/t5/Idea-Exchange/PREVIOUSITEM-formula-which-is-like-PREVIOUS-but-refer... Other…
-
Extend 10M item limit on RANK and similar functions
Description of the enhancement required: Raise limit on RANK function while maintaining adequate performance. How would it help your business process: We've been seeing more incidents where customers are hitting the cap placed on RANK and similar functions.
-
Mimic excel pivot functions
Hi All, IN Excel you can double click on any value in a pivot table and it will show you the underlying records that correspond to the output you clocked on. I have a Module dimensioned by a numbered list that holds imported data. From that I am creating an output table that looks very similar to the Pivot (people used to…
-
User Access Issue - Cannot insert without a parent
Hi, There are two lists: A (parent) and B (child). List A has selective access turned on. Now, one of the users is not able to load items into the list B without a parent even with the proper access to the parent list. They are able to load only with Workspace Admin access. Attached is the error that the user received.…
-
How can I map these two dimension ?
I am writing formula for growth percentage where time dimension in weeks, and having product family as a list i.e. Product SKU's. In source module I have product family AS a dimension, where product SKU is third level of product family hierarchy. How can I map these two dimension ?
-
Numbered List update
Hi, I have a numbered list A with list items. These list items are getting imported through action from some other list B. I need to rename the list items of B and want the same renamed items to get imported to list A. When I rename the list B items and run the Import action, new list items A are getting created with new…
-
Clear Module Data
Hi I need to clear data for all 5 level(5 Numbered lists) using single import.Individually i have created clear actions at each level and it is working but I needed it to be done at top level i.e if i clear at top level all the data at child level should also be cleared.Any suggestions to clear at Top Level. Thanks SriNitya
-
Planual Explained - Day 38
"Rule 1.06-03": Article 1, Chapter 6, and Rule 3” Avoid single item subsets If possible, try and avoid single item subsets, if there is a top level in the list, a single item subset will always have two members Here is how it was done in Pre Planual Era. We used to create a subset which includes/houses just a single list…
-
Planual Explained - Day 37
"Rule 1.05-11": Article 1, Chapter 5, and Rule 11” Do not embed Numeric values or Dates within the Code of a list Dates and values are "data" and should not be part of a code Here is how it was done in Pre Planual Era. What is wrong with this method? Dates and Values are data points and should never go to the list as part…
-
Planual Explained - Day 31
"Rule 1.01-04": Article 1, Chapter 1, and Rule 4” Consider All Periods. Consider the use of All Periods.This is effectively the Top Level for time and whilst increasing the model cell count very slightly it does allow for flexibility in modelling.It goes against PERFORMANCE elements of PLANS if you wish to go against this…