-
UX: Change available hierarchy levels on global page selectors if used as a dimension
Currently I can change available list items and hierarchy levels for global selectors which are used as page selectors in a published module only. In the example below Plant list is used as a page selector and avalable to Filter and Show/Hide items listed in the selector. Although, if I would like to enable Materials level…
-
Add Minutes to trigger frequency in Cloudworks
Suggest to add minutes to trigger frequency Currently in trigger frequency in scheduling window there is no option to select minutes, This can be extremely beneficial and can add more flexibility to scheduling tool As example 1. During active forecast and budget time data constantly needs to be imported & exported 2.…
-
Access multiple tenants with Tableau connector
As an Anaplan Partner / solution consultant I need to analyse regularly data from Anaplan Customers. To do this efficiently, I want to have direct access from Tableau via the Connector to multiple tenants / customers without the need of downloading large data sets to the hard drive (which in my opinion is unsecure).
-
Showing Locked User Status
Recently we found our Anaplan Connect job failed because the integration user account to run the Anaplan Connect script was locked due to five failed login attempts. However, only Anaplan Support can check this information. It will be useful if the user status if also displayed as part of the Users setting in the model.…
-
Pivot feature for Google add-ons
The information toolbar suggests that we pivot in Anaplan using filters and pivot feature. This is an inconvenience from the user experience perspective. If that were to be the case then we are better off creating views for everyone. Moreover, this feature that's been mentioned as information does not work as intended.…
-
New UX: Set a Default Source Model in each Slide / Dynamic way to refresh source Model
It would be useful to have an option to set a Default Source Model in each Slide of the Report allowing users to reconcile data between 2 or 3 models in a single Report without the need of reselecting source Model in each Slide again and again AND/OR instead of opening multiple Reports side by side and do reconciliation.…
-
Summary Methods Based On Line Items - Product as an example or Weighted totals
Hi All, I feel that the summary methods in Anaplan could be improved further by including more flexible options to use other line items (same dimensionality) to influence summary method. For example on a model I have been building recently, many of the summaries require the product of 2 line items divided by the total of…
-
Allow the Page Builder to select if a Card will show in the Mobile App or not
There are situations where certain cards are used purely to get other cards to be properly aligned. There are other cards that make sense/are nice in the desktop experience but are extra/noisy in the Mobile experience. The request: give the ability for the PB to uncheck a switch/slider. The result would be that the…
-
Change import default name while setting it up
It will be good to have ability to change an import name the same time when you first create the import. For example, having a special field on import setting window, like in screenshot.
-
Childs with same parent crossing in a same module
Hello all, Imagine we have a parent list Country (G1) and two child list attached to this list: Fisrt list => Regions (G2) and a second list Stores/Entities (G2 bis). We need this second list Digital Stores because for each country we may have 2 or 3 digital stores which may serve all regions of my country. For example, in…
-
Excel Add-in: Support Multi-Factor Authentication (MFA) with SSO Login
As an Anaplan user, I'd like to be able to log into Anaplan with the Excel Add-in using SSO. My IT team requires MFA (Multi-Factor Authentication) when using SSO.
-
Unpublished Changes Tag NUX
As a Workspace Admin I would like to see pages that have unpublished changes. I can use this following any ALM push to publish the changes to ensure pages are updated.
-
Modelling from module "Line Items" view
The "Line Items" tab is a really handy view when reviewing a model and looking through multiple line items across different modules at the same time. You can currently access the formulas by double-clicking but I think the view would be so much better if you could access all the module modeling actions (i.e adding a new…
-
Keep Model In Memory (KMIM)- can we keep model cache alive , it will help with performance
n we keep the model cache in the buffer/memory (Keep running) alive, instead of clearing eveytime after logout? This will take a long time to load the model every time when size is huge ..otherwise we have to keep some dummy job running to Keep Model In Memory (KMIM)
-
Parquet file format
It would be great to have the capability to load parquet format files to Anaplan as it becomes more and more popular in databases. At the moment we need to add one more step to the integration process to change the format to csv./txt. before loading data to Anaplan.
-
Setup User Access without Admin Rights
As a model builder with hundreds of users, I need to be able to allow users to setup access for other users without having workspace admin rights. A workspace admin license is very expensive within Anaplan and we limit our workspace admin licenses to model builders. A model builder spending several hours per week managing…
-
Role Access Setup
It would be good to have the "Roles" section ie Roles -> Modules, Roles -> Actions, etc to be production items. Recently we've had need to give access to certain items for differing roles and whilst a quick thing to do having to do a DEV sync particularly if you're in a DEV cycle is quite the onerous item. Below is one of…
-
Ability to use ROLES as a dimension and a dropdown for DCA setup
While setting up the Dynamic Cell Access based on user roles we would have to resort to a workaround where we would create a list of roles and based on that we would setup the DCA. However, if the ROLES (native system defined) could be allowed as a dimension, just like how the users are allowed to be used a list, it would…
-
New UX - Add Collapsible Cards on Boards
It would be great to be able to add collapse cards on the boards - similar to Additional Insights- . It will allow the view to be clean but will also house the information to be accessible without going to another page. Boards are especially helpful when displaying charts and key KPIs and being able to house the supporting…
-
Formula Box Auto-Resizing/Docking/Undocking
Having the flexibility to have the formula bar in the new modeling experience expended at the top versus jump to the bottom. In addition having the ability to move the formula bar around similarly to undocking and redocking so that the window has an auto-sizing feature when you toss it to the edges of your screen or…
-
Interaction between 2 cards in NUX
Hi, I think it would be useful if we could sort cards simultaneously. Specifically, to sort a table and a bar chart at the same time. For example, I have a table of countries (list) with their price and volume values ( line items). A bar chart is used for visual presentation of this data as well. If I sort (from highest to…
-
New Modelling Experience Button Turns OFF in normal browsing mode of Google Chrome and MS Edge
The New Modelling Experience Button/Switch/Toggle turns off automatically if a user logs out and logs in again. This behaviour has been recorded in Normal Browsing Mode of Chrome & MS Edge. However, it does not seem to happen in Incognito Mode.
-
Suggested Import Data Source
Would be nice if I could quickly select an import data souce when setting up new import based on the most recently created saved view. The suggested source item can be based on whatever the last source in the Import Data Source list is.
-
Ability to change Pivot in Google Sheets Add-on
The Google Sheets add-on doesn't let us change the dimensions in the Pivot when setting up the connection, unlike the Excel add-in. We need to create custom views in the model to be able to pull the data in the format we want. This is a big deterrent towards adoption of the Google Sheets add-in and restricts the…
-
User List in a module only assigns space to users who have access to the module
I think it would be a good idea if the user list would only create space for the users who are in a group with access to the module. In a scenario where a set of super users need to do their own variance analysis that involves lots of calculations, having all of the users who also don't have access to the module will lead…
-
Optimize NUX Pages - Title
Whenever the Title of the card is input, it eats up a lot of real estate vertically as it pushes down the card contents. Can this be optimized so that the real estate can be put to better use.
-
Allow DCA on actions
It would be helpfull if DCA is enabled on actions & processes. So a lock model functionality blocks a user from being able to upload on top of not being able to manually input numbers. Thanks
-
UX idea: Pictures on published actions and processes
To make interface more user-friendly I propose to add ability to appy some images instead of action labels. Currently you can use emojis instead of an action label. But this means you are limited by existing emojis and they also can look diferent on different browsers and devices. Would be nice if we could choose an image…
-
Background Color of User Input Fields on New UX
Hi, I recently received feedback from the users that the input fields are not very distinct from the calculated fields on the new UX. Conditional formatting can help us change the background colour but I fear it can confuse the user if there is another genuine Conditional Formatting on the same line item. It would be…
-
Report Page - Table formatting options for font size and colors
Enable increasing the font size of tables in a Report page similar to font size in text card. On placing a text card next to the tables card, the font size in tables are very small in comparison to other text. For better readability, it would be great to have this feature enabled. Adding colors for text would a "good to…