Ensuring Validity of Time Filters After Time Labelling

We've recently released the ability to change the two-character prefix for time labels. If you have a hardcoded filter referencing a time formatting line item, it is possible that changing the Time Label will invalidate the filter. This occurs if the filter is referring directly to the name of the time period; changing the time label will, effectively, change the name of the time period, so the filter is then invalid. The good news is that following Best Practices you can prevent this, so it is best to check the filter(s) (and re-engineer if necessary) before changing the Time Label.

The following illustrates the issue and show the steps to prevent/resolve:

How the Issue May Occur

In the example, the model has a line item that is formatted as a time period—in this case, Quarter.

Picture 1.png

There is also a filter set on the line item, and the filter criteria is as follows:

Picture 2.png

From the above, you can see that the filter refers to a specific time period - "Q1 FY20".

The resultant module will look like this:

Picture 3.png

 

Now, let's change the time label in the Time Settings tab, and change the FY prefix as required.

Picture 4.png

The effect is that now Q1 FY20 is renamed to Q1 CY20. When the target module is refreshed, note that the filter is invalid and so returns all rows.

Picture 5.png

Click on the Filter icon, and you will see that the filter has been removed (because it was rendered invalid).

Picture 6.png

 Click on the "–" symbol and re-create the filter.

Picture 7.png

The target module is now correctly filtered as before.

Picture 8.png

All good? Well, not quite.

As per the Planual, the above filter construct does not follow Best Practice as it is hardcoded.

There is an alternative method that conforms to Planual rules as it is sustainable, and it will also remain valid once the Time Labels have been edited.

Best Practice Approach

To ensure the filter remains valid, the filter structure should be changed before the Time Label is amended, so let's assume we haven't yet changed the label.

Set up a Time Filters module and a boolean line item (in the case called 'Filter'), dimensioned by the required time format (in this case Quarter).

Check the appropriate Quarter, as below.

Picture 9.pngPicture 10.png

In the target module (or a separate module), add a line item that will be used as the filter. Format this line item as a Boolean and add the following formula.

Time Filter.Filter[LOOKUP: Time]

Picture 11.png

Now replace the filter criteria to use the ‘Filter’ line item.

Picture 12.png

The result is the same as the initial filter.

Picture 13.png

Now that the filter structure has been adjusted, it is safe to change the Time Labelling.

In the Time setting tab, change the FY prefix as required.

Picture 14.png

The filter is still valid after the change of Time Label.

Picture 15.png

Following the above steps will ensure you can utilize the new Time Labelling functionality, while also adhering to Best Practices and ensuring your model filters remain valid.

The content in this article has not been evaluated for all Anaplan implementations and may not be recommended for your specific situation.
Please consult your internal administrators prior to applying any of the ideas or steps in this article.
Comments

Thanks for all of your contributions to Anaplan best practices, David! This is a neat trick that I am excited to use in the future!

Contributors
Latest Articles
a week ago
2 weeks ago
User Provisioning
Best Practices
3 weeks ago
by Misbah
Labels (1)