-
Level 2 Sprint 3 INV01
hi, Does anyone know how to construct a formula with Monthvalue to be used as a filtering ? to see that user has to check all weeks in a boolean before the respective month gets checked ANy advice?? Thanks donna
-
Trouble downloading Level 1 Certification course model - "Example Level 1 Model"
Hi - I am beginning my Anaplan training and bumped into a problem downloading the "Example Level 1 Model". The instructions state: Complete these steps to add the Level 1 Model Builder example model to your Anaplan workspace. * In a separate browser tab, log into your organization's Anaplan workspace. * Return to this…
-
INV01 Module Line Item Formula Details
I'm having trouble with these formulas. for the Not 1st week of Timescale? line item in the SYS01 Time Settings By Week, I was using the formula NOT Current Period? but I don't think this will work because that will just apply for FY20 and not FY21 and so on. I was thinking of using WEEKVALUE but I got an error.
-
How to Clean Data
Hi Mr./Mrs， Who knows how to clean data in Anaplan? I need to clean a lot of data.Is there scprit or any good way to do this? Thanks,
-
Level 1 Part 11: Question on Formula Failure
I am working on Part 11 Profit and Loss reports and I am on the part of the activity where I am supposed to add formulas into the REP03 Line Items, but every time I copy and paste the exact formula in it fails with this notification. I have double checked and all of my line items are spelled correctly and there on my…
-
Level 1 Model Building Part 7 - Adding formulas to line items after importing
I am trying to add the formula (CODE(ITEM('G1 REGION')) to the SYS02 Region Details. I keep getting an error message that the formula is invalid because code does not apply to any of the lists (it has an empty applies to). I have a feeling that my applies to box should be filled with G1 region, but I am afraid that putting…
-
Level 1 - Model Building - Display Quarters
Hi, How do you get Quarters to be displayed in Modules? The activities did not request for Quarterly display in Module. Is it a best practice? If so, where else can it be defined?
-
Level 1 - Model Building - Part 12: Dashboards - Publish REV03 Saved View to Dashboard Page
In the Activity: Publish REV03 Saved View to DashboardPage, the instructions state to publish to Revenue and Margin DB. Not sure if I am missing any earlier steps as in so far in the activities, the only dashboard created is Margin Calculation DB. Should it be published to Margin Calculation DB or Revenue and Margin…
-
Level 1 - Model Building
In the Level 1 - Model downloaded, the Summary Method was set-up as 'Any' for Actual period? and Forecast period?. Went through Anapedia and am looking to get further explanation on this and hopefully with some samples. Below explanation from Anapedia. Thanks.
-
Level 3 Sprint 1 - 8.3
I am unable to progress past section 8.3 in level 3 training. The notice says I need to complete the content above before progressing but all sections above are marked complete and 8.3 has no checkbox. I have opened the training on both Chrome and Edge with the same issue. Screenshot below, has anyone else encountered…
-
FAQ around Level 3 Model Builder training
Does anyone have any facts around when the Level 3 Model Building training will be available? Has Anaplan hinted at any predictions of a release date?
-
Level 2 Model Building - Sprint 1 - No access to run imports into DAT01
Hi! I'm going through model builder 2 -course and faced notification below (screen caption below) trying to import into DAT01 Beginning Inventory -module. What does this mean, how can I continue? Br, Olli
-
L1MB Training - Section 12
Was just helping a new model builder and he pointed out what appears to be a small issue in the training. In creating the module view REP02: Chart DB, "size" is not specified to be a part of the page selectors, columns, or rows. This appears to me to be an oversight, not a huge deal, but was confusing for the model builder…
-
Potential Error in L2 Course: "Actions involving numbered lists CANNOT be placed in a Process"
Taking the on-demand L2 course right now. There's a slide that says: "Actions involving numbered lists CANNOT be placed in a Process" Pretty sure it was in the Create a Process with Multiple Imports section: Anyway, either that statement is incorrect, or I must be interpreting this differently. I just tested an "Process"…
-
Level 2 Model Building - SYS08 module
Is there a step missing detailing how we should build the formula for the 'supplied by' line item for the SYS08 SKU details module?
-
NEEDS Search function in Academy Courses and Training
I didn't know where to submit this but this section of the community really needs a search function so that everyone can find related topics easily. Does anyone else feel like there is just a lot of information scattered around in different places? Maybe I'm just not comfortable with the layout yet?
-
Unable to locate Account Flat List (.csv file) in LEVEL 2 MODEL BUILDING: SPRINT 1 Data Hub Model
Unable to locate Account Flat List (.csv file) in LEVEL 2 MODEL BUILDING: SPRINT 1 Data Hub Model While creating DAT03 Historic Volumes module for Sprint 1 - User Story 3, Level 2 Model Building Course, in the Dimensions: Account Flat list is included, but I'm unable to find the Accounts (.csv) file in the training module.…
-
Quick Filters
Summary: Quick Filters are always available to end users, allowing them to filter data on a dashboard according to criteria that they set. This allows end users to focus their view on the information that is important to them. This series of two lessons will equip both end users and model builders to make the most of the…
-
Certificate Expiration
It looks like the current model building certificates have a note that the certificate is valid for only 2 years after issue. Is the expectation that model builders will have to re-take the course or that there will be some sort of different re-certification course/test? What about certificates issued prior to the new…
-
Level 2 Model Building Sprint 2 - Import into DAT03 Historic VolumesPage
Hi All, I have searched high and low for this with no avail. As per the activity titled above, i am trying to run the 9.Import Data from hub process and it fails with an error: This process is meant to import data from hub but i believe its failing as the data is not the same. This is the data of the DAT03 Historic Volumes…
-
Level 2 model building: Location Flat List
I noticed "Default Shipping" was not an attribute in the Location Flat List. Are we supposed to create a property for that in the flat list in order to import so we can update the Views for the Location Module?
-
L1MB Time and Versions
Hello community, Right now I am on part 3 of the L1MB training course and I had a question about switchovers. The directions are as follows. Configured the Time settings for your model correctly. * Calendar Type: Calendar Months/Quarters/Years * Fiscal Year Start Month: Jan * Current Fiscal Year: FY20: 1 Jan 2020 - 31 Dec…
-
L2MB-S3: Activity Create Combination Chart for Dashboard
Hello, I have an employee going through the new Level 2 Certification and have noticed some discrepancies in the activities. The example we found is for L2MB-S3: Create Combination Chart. In the attached picture I have highlighted where previously created modules are referenced with different names. Time Settings by Week…
-
In-Person, Instructor-Led Version of Level 2 Training
Hello, Was wondering if an in-person, instructor-led version of the Level 2 training was going to be released next year, or in the near future? I'm trying to scope out our training plan for the coming year and wanted to take this into account. Prior to the training content update (to L1 and L2), we had our "intermediate"…
-
Level 1 Model Building - Step missing
I am working through Level 1 Model Building: Price growth | Part 9 There is a step that says 'Create REV04 Price Growth Rates Module' Then at the end it says... make sure you ...Added formulas to the line items in the REV04 and REV05 modules There were instructions for adding formulas to REV05, but not REV04. What are…
-
Level 2 Sprint 2 Examination Reset
Hi, Unfortunately, I failed twice in Level 2 Sprint 2 Examination (missed by a whisker) What to do to to get it reset & attempt it again? thanks, Ajinkya
-
301 Anaplan Connect
Overview Anaplan Connect enables the Anaplan administrator to automate Anaplan imports of data and lists, exports. and other actions from the client. Find out more about this valuable tool in this course. After completing this learning you will will be able to: * Use the Anaplan Connect Guide * Download and set up Anaplan…
-
FAQ around Level 2 Model Building
Do I need to do Level 1 Model Building to do Level 2 Model Building? Level 2 Model Building is open for everyone to access. However, you will need to complete Level 1 Model Building exam to complete the build for Level 2 Model Building. This is because you will need your post exam Level 1 model to import data into. I am a…
-
Level 2, Sprint 3 - cannot complete INV01 Module Line Item Formula Details section
I am having an issue progressing from the "INV01 Module Line Item Formula Details" section in Sprint 3. I cannot get this section to mark as complete, even after clicking all the blue ? icons to view the formula tips, including in the maximized view. There is also no manual checkbox to toggle completion. This means I…
-
First time learner access
Hi All, I am trying to learn Anaplan. Started with basic videos. However there are sections that need access to the portal(practical sections). Can you please guide me the right approach to get a login or alternative? May be i am not in the right path, can someone guide me to the right path to learn Anaplan. Thanks
