-
UX Spotlight Event - One Week Away!
Hello Group Leaders! It's been a while - hope you are all well! I wanted to let you know that on Wednesday, July 20 at 10 a.m. ET I’ll be joined by Taylor Rogers, @taylor_rogers Certified Master Anaplanner & Merchandise Systems Model Builder at Stitch Fix, and Andy Martin, @andrew_martin_1 Director, Operational Excellence…
-
UX Spotlight Event - One Week Away!
On Wednesday, July 20 at 10 a.m. ET I’ll be joined by Taylor Rogers, @taylor_rogers Certified Master Anaplanner & Merchandise Systems Model Builder at Stitch Fix, and Andy Martin, @andrew_martin_1 Director, Operational Excellence Organization at Anaplan, for a fun and informative session focusing on the migration from…
-
UX Spotlight Event - One Week Away!
On Wednesday, July 20 at 10 a.m. ET I’ll be joined by Taylor Rogers, @taylor_rogers Certified Master Anaplanner & Merchandise Systems Model Builder at Stitch Fix, and Andy Martin, @andrew_martin_1 Director, Operational Excellence Organization at Anaplan, for a fun and informative session focusing on the migration from…
-
3.2.11.3 Create Saved View for Combination Chart
Hi, I am trying to create Saved View (Chart for UX) but I am not sure the result is correct. It shows that Beginning Inventory is negative. Screenshot my INV01 : Screenshot of Chart for UX: Please guide me! Mark
-
Reset in-built Anaplan NUX Filters
Hi Everyone, Is there a way to reset all NUX filters from all grids in a worksheet through an action or just by a single click? I know that these filters can be removed in filter icon but if I apply filters in two grids, it takes 4 clicks to remove all of them. Is it possible to do it in one click?
-
DYK - WEEK 10
Week 10: Run Steps Automatically Did You Know? End users can be prompted before their actions are run. Default behavior of UX is that once the actions are run by end users it straightaway starts processing the action without any prompts and it also doesn’t give you the break-up of status. You as page builder can set it up…
-
User History in UX pages
Is there a feature in UX pages that allows us to track modification made by the users?
-
Create product Replenishment Page
Hi, I am trying to create UX page for this. Time does not show as expected and also Shipping Method line do not show anything although my INV01 module looks good. Please guide me. Screenshot of my INV01: Regards, Mark
-
L2 3.5.5 Unable to select at location level in the hierarchy in the Ux
Hello all, I am trying to select a location from the hierarchy filter (example - New York) but after I select New York the selection shows US instead of just showing New York (i.e. it shows country level only and not location level). Don't know where I am going wrong here. Below is the screenshot:
-
I started exam and my laptop turned off
I started the Level 1 exam and my laptop turned off due to low battery. Can anyone let me know if this count as 1st attempt or not?
-
10 things you didn't know about Management Reporting
Ready to leverage our new exciting Management Reporting feature? Here are 10 tips you may not know and can help you create magnificent reports: * Include a module in your text card configuration to link to your model periods, module dimensions or line-item data to make your titles dynamic. * With a simple right click after…
-
UX transition workshop: Anaplan Live! 2022
In this article, you'll find UX transition key insights and actionable takeaways to apply in your specific context. As shared during Anaplan Live! 2022, we've curated a list of recommended resources from across Community to provide a consolidated view to support your UX transition journey. Refer to the attached…
-
User filter doesn't work when mark Boolean with Space button
Hi all, yesterday i find some weird things in User filters mechanics in UX. When I mark a boolean with the mouse, the data of the subordinate tables is filtered automatically. But if I mark booleans using the "space" button, to update the data, you need to press the "refresh" button. I thik this is a bug Base…
-
UX Designer hub feedback
Hi, I'm looking for some quick feedback on our UX Designer hub. Please leave a comment (or DM me) with the following: * Do you find the hub content useful? Why/why not? * Do you have any suggestions for how we can improve the UX Designer hub? * If you are not a regular visitor to the hub, why/why not? Thanks in advance!…
-
OEG Best Practice: Implementation best practices: Leveraging personas
If you are transitioning from Classic to the UX, you may have read this article about our recommended methodology: U.S.E.R. (Understand, Sketch, Execute, and Repeat). One of the key concepts during the Understand phase is to really get to know your users. For this, we recommend a classic UX tool: Personas. Personas What…
-
New — Get inspired with UX Designer Quick Tips
Introducing the latest way to learn and develop Anaplan skills — UX Designer Quick Tips! Hear from a variety of Anaplanners as they share actionable tips designed to optimize the UX experience. Visit the UX Designer hub to view a new featured tip each week. The complete list of Quick Tips is also available to view at any…
-
NUX: Time Synchronization Bug
As anyone been facing an issue where the syncing of time in the New UX is going all over the place when a mixture of time ranges and model calendar is used on one page? Bug: Selecting FY23, on the context selector, followed by clicking on a month column in a table will cos the various tables to lose the sync everywhere,…
-
Rename a list item through a NUX page
Hi Everyone, Is there a way to rename a list item through a NUX page? Thanks! - Shubham
-
Spotlight: Transitioning from Classic to UX
Hi all! I just saw this upcoming webinar on transitioning from Classic dashboards to the UX: RSVP link Looks like it will be a fun session and thought some of you may be interested in joining too. See you there! Thanks, Timmy
-
DYK WEEK - 7
Did You Know? That You can change the name of the non-Numbered list items directly in the app even if the model is in deployed mode as long as it is the Production List. You can also change the Parent of the list items as well delete the list items directly from the UX. These all features are available by default but you…
-
DYK WEEK - 6
Did You Know? That You can now use “Assign” function in UX. There are no changes to how Assign function works or about the pre-requisites. You still need to have an underlying numbered list and at-least one list formatted property in the list. You can see ASSIGN function in the Action Card of UX. One important information…
-
Sum over selected months
Hi team, As one of the requests from our client, we are trying to add "Sum over Selected Period" next to the sum "All Periods" The use case is, that we have a module with dimensions- 4 line items and time (month). As the data is in numerical format, the default is sum "All Periods" On the dashboard, the user can filter out…
-
Hiding display name for certain users
I have a model with sensitive HR data, and I need people which should not have access to identifiers of individuals to be able to enter data. I have a list of employees, and I need, somehow, to build a dashboard which I can give other business areas access to, so they can enter forecast data. The problem is that they…
-
Your support is needed! UX Audit Functionality!
Hi everyone - please can we get some support behind this idea for UX Audit functionality - would be a great add to the product! Check out the details here and please give it the thumbs up
-
Build: Focus on your power users first
-
Design: Create a style guide
-
End user features: Using the content menu
-
Design: Review, review, review
-
need help for practice
Hi All I want to populate "text line item" which shows string between 1st and 2nd commas of the items in the module. How can i do it. which function should i use here Thank you & regards Yash
-
Anaplan Live! UX Designer Meet Up
Attending Anaplan Live next week, in San Jose? Make sure to swing by our Customer Connect meet up, specifically geared towards UX Designers! Our own @andrew_martin_1 will be leading a relaxed conversation and connecting attendees with similar backgrounds. Sign up today. Unable to join in-person? Make sure to register for…