-
Monte Carlo Simulations
Monte Carlo method is an algorithmic technique used to understand the impact of the variability of a set of drivers in a forecasting model, using a probabilistic approach. It is widely used in environments where the number of drivers involved and their volatility is high and documented, especially in market finance. It…
-
Support formula wildcard characters so that formulas dont need to be constantly updated
Would like to be able to use wildcard characters in anaplan formulas, specifically in the SELECT function. Ie. I have this: IF Version Selection.Selection[SELECT: VERSIONS.'2018 Actuals'] THEN "SBUDGET" I'd like something like this IF Version Selection.Selection[SELECT: VERSIONS.'???? Actuals'] THEN "SBUDGET" where ????…
-
Extend workspace size beyond 720 GB
We need Anaplan to develop into a truly scalable enterprise solution. Introduction of Hypermodel workspace were a major leap in 2020. Now we need Anaplan to move to next level/indefinite. The max workspace cap will force us to implement an architecture with less generic structures. This hard cap pose a risk of uncontrolled…
-
Formula Edit Window
Dear Anaplan Developpers, Is it possible to not close automatically the Formula Edit Window after validating modification ? It will be very usefull when we are auditing and editing several line items in a specific module Thanks a lot
-
Need a way to identify line Items being used as Filters.
There needs to be a way to identify line items that are being used as Filter in same module or any other module, This would be totally helpful while deleting line items that are no longer required.
-
Indicator for line item if its used as a filter
It would be great to have an indicator on line item if it is used as a filter in any saved view.
-
Model Search Idea: Search through Pages
As a model builder and a page builder, I would like to be able to search pages via model search as I can do with dashboards now. Additionally would be perfect if I could search modules within Pages also. This would help me a lot to find out where a certain module is published.
-
Remember search criteria in Model Search
It would be really helpful if having done a search in Model Search and opened something up if the search criteria for last search remained for a while or till next login. I so often seem to find myself opening what I think I'm looking for only to find it was not the case but I then have to go back and start the search…
-
Make available Card Templates across multiple models
Currently we can save card templates in our development model, but we are not able to access this template when we move to our test or production models. We must manually add a new card and make all changes to match. It would be great if these templates could be stored at a higher level so that the card would be available…
-
Search filter for Lists and Roll-ups
It'll be very helpful to have Search filter on Lists and Roll-ups section of pop-up box for creating new module. Sometimes, it becomes tough to find list here to add in module.
-
Dynamic Totaling for Lists with Selective Access
We have users who only have access to certain list items in the L3 list. They want to be able to see the total for the list items that they are responsible for. However, with selective access, totals for the hierarchy are hidden. If we give them Read Access to the Top Level of the hierarchy, they will be able to see…
-
Mass Change of Apps Associated Model
Right now if I duplicate an App to point it to a test environment I have to change each page from the manage models screen. It would be nice to be able to either copy and paste the model change to all the page lines or have a select all feature that lets me change all of them at once.
-
End Users being able to see all Users in a User dimensioned module
When you've got a module dimensioned by users only if you're a workspace admin can you see the whole list - not very helpful if you're pushing out user-level DCA to end users to manage themselves. Now I can have a separate "user list" that's can be interacted with but it should be the case that end users can see the whole…
-
Ability to sum based on boolean
Description of enhancement required Ability to allow to aggregate using Boolean mapping. Currently mapping can only be applied over List elements. It would simplify many formulas if we could simply SUM/PRODUCT over TRUE/FALSE Boolean values. An example of enhancement - See example below *List called "Client" with 3 items.…
-
ISNUMBER function
There is currently no way no easy way to identify whether data is numeric or not. The workaround for X is to check the following set of conditions: NOT (VALUE(X) <= 0 OR VALUE(X) >= 0) Currently this is certainly not a consistent approach and there is always a risk that the comparison operators ("<=" and ">=") will start…
-
Add a new Referenced Field in the blueprint
There should be a referenced field in the blueprint screen that allows the user to see where filters are being used in the UX. Also, where the module is used on the UX
-
Copy Process, actions of imports, exports, deletes
Hi Anaplan, I miss the functionality where you can Copy whole process in Action tab, also the imports, exports, and delete actions. When you need import data from different model, just only you need to change the source, when the rest is the same. BR Robert
-
Developers need visibility when view is used in actions or UX pages
For the developers, it is nearly impossible to be sure that by editing a view or line item in a view it will not break any actions. It would be good to have a warning message when a view or line item is used in an action. It would be also great to have quickly accessible info on what views are used in actions and UX pages…
-
NMX Idea: Highlight Referenced by line items within the same module
As a model builder, I would like to distinguish quickly which line items are referring to the active one. This will help in situations where there are too many references and it is hard to keep track of them when auditing. It will bring more transparency to data flow analysis. Also, it can highlight potential circular…
-
Search possibility when adding selective accesses for users
It is impossibly hard to navigate and find and select a selective access item for a user in user management when the hierarchy is complex and the selective access list has too many items. Is it possible to implement a search functionality for a selective access lookup screen?
-
Search Option for Filter Line Item to Find
Hello Community, I would like to give one suggestion/idea on to provide search option while applying filter on module. This thought came when I'm scrolling to find my filter line item out of n no.of line items in the module. I hope this makes easy modeling/avoid scrolling a lot while applying filter.
-
Make the "model open analysis" available
It is very common to face performance issues with Anaplan models. Examples are not lacking, you just have to have a look to Anaplan Community to realize it. Several “best practices” exist: https://community.anaplan.com/discussion/33530/oeg-best-practice-plans-this-is-how-we-model Moreover, a tool exists, the “Model Open…
-
Statistical Functions Package: Normal Distribution
Concept: Include basic Statistical Functions in Anaplan Description: I miss some basic statistical functions among the available functions. These formulas are extremely useful when it comes to calculate chances or risks, which is a common and useful bit within the forecast calculations. A good example is the lack of a…
-
Use ChatGPT's API to produce commentary and send it back into Anaplan
I've love to see some more native API's to connect Anaplan into ChatGPT API to be able to generate commentary. This would be an application similar to CloudWorks or PlanIQ that allows you to configure certain fields to be selected and then a certain style or questions can be asked to ChatGPT to produce the commentary based…
-
Dynamic Cells Calculation (DCC)
This feature would allow to selectively switch between "Calculation" or "Manual Input" on a specific LineItem. Much like the DCA, the DCC would be based on a boolean. When True, the formula would apply but when False the user would be allowed to type data. This would allow to make Anaplan much more dynamic and greatly…
-
Multiple Summary Methods Per Line Item
Description of the enhancement required: Ability to use different summary methods by module dimension (list) An example of the enhancement: We can currently summarise differently the lists and the time dimension but it would be great to be able to choose a different summary method by list/dimension. For instance if a…
-
Stop the mistake research processing
As a Model Builder, I would like to be able to stop the mistake research by using an action button. This processing can be very long when we are building an heavy model (5-10 minutes) and most of the time we already know where is the mistake (format, etc.). That's why we can save a lot of time if we could click to stop the…
-
Line items
Hi Anaplan Team, Model builders could work more quickly and efficiently if we could display the list of filters and import actions. When we attempt to delete a line item, Anaplan shows the referenced line items, but it does not indicate which line items that specific line item is using in filters and import actions.
-
Ability to select versions as a list formatted line item for use in lookup statements
Versions are useful as they allow switchover functionality enabling a user to both enter a forecast on a line and see actuals in the same line item. However, comparing versions to eachother (any version to any other version dynamically) requires a "Versions List" and logic to engage that list with the Version you want to…
-
Creating New Model with No Access to others by Default
When a new model is created why does Anaplan provide access to other users within that workspace by default. It would be great if this gets restricted to the user who creates the model and then users can be added incrementally.