-
Use Different Color in all Chart options - Value based(Smae line item value)
Currently we can choose single color in Graph or Chart for the same line item values. I have received customer feedback that this should be flexible as they would like this to see Negative value to in different color than positive values, and color changes for increase and decrease of value in same line item, say for…
-
Cancel current task/process if estimated processing time more than 2min
My idea is to have some sort of dialog window that will pop-up as warning that current change will take more than 2 min or so. Case: For example, I'm building a module and at some point forgot to add matching dimension to bring up a value from other module. Following two would of happen: 1. I am lucky and Anaplan gives an…
-
Set Diagonal rule for cell
I want to be able to set a diagonal rule for a cell. It would help with display formatting, etc.when cell contents are invalid.
-
Display who is editing and viewing a UX page you are in
It would be helpful to display who is currently online and indicate which users are viewing or editing a grid within a dashboard and worksheet for a selected context that you are also in. If a user enters input in a different context, at least inform you that they are on the same page. This function is similar to other…
-
Clear filter/sort on User Logout
Filters and sorting must be manually cleared. This is an issue with our implementation as users that are not in the system frequently will forget a previous filter is applied and overlook data that was previously filtered out. At best this causes some confusion and lost time, but can also cause significant delays in…
-
NUX - Multiple Pages/Worksheets Open at a time
As a user of the New User Experience, I want to have the ability to have more than one Page or Worksheet open at a time. Depending on the setup of a model, and UX, many users may create temporary views and jump back and forth between a couple of grids to validate or compare. In the classic UX, you can have multiple…
-
'Freeze Panes' Functionality When Scrolling in a Module within a Dashboard
The ability to freeze the rows or columns when scrolling within a module that has been published to a dashboard. In some instances, when you cannot trim the module to be user friendly on a dashboard and scrolling is required, it is easy to lose your spot as to where you are within the rows or columns of the module. A…
-
Position context at top of card in new UX
Card context placed at the top of the card and not the bottom. Issue is that the context at the bottom means that the context can be unclear or even misleading for cards that are at the bottom of the page. When not seen the viewer might just assume the context from the page selectors at the top of the page which is then…
-
Sorting for Categories in NUX pages
Currently, categories in NUX are displayed in Alphabetical order. It would be great to get Sorting feature for categories name.
-
Scatter Graph Formatting and Sorting in UX
I'm trying to add a scatter graph to a Management Reporting page. I would like to be able to select the number format or reflect the number format of the underlying module (percentage in this case). I would also like the option to sort the axis in descending order (e.g. go from 100% down to zero) and to hide an unused…
-
Set Default value for context selectors when entering a UX Page
¿Is there any way that I could set up a default value for the context selectors when entering a UX Page? The clients wants to have the selector always at the top level first, for example in a hierarchy with countries and cities when entering the page the selector should have the value total countries. There is the reset…
-
NUX - Set Default Model when Multiple Source Models are Assigned
I am excited we now have the ability to point multiple models to the same page, however with this new functionality, we have also found some frustration. We need the ability to set a default model when multiple models are assigned to a page. If I have a DEV model and a PROD model pointed to the same page, I want the…
-
REQUEST: add the ability to enter text on a Shape, directly
Currently, if we want Text on a Shape Card, we must add an additional, Text Card, layered on the top of it. But it would be nice to be able to add Text directly to the Shape. With the option to set the alignment (left/center/right and top/middle/bottom).
-
REQUEST: ability to set color of Shape in Management Reporting from Module
I would like the ability to set the colors on a Shape, based on Module data. This would allow the background color and border color of a shape to reflect underlying data from the Model. Being able to set Border Width would be nice, too.
-
SUGGESTION: how about giving us the ability to create “mini” Management Reports.
These would be a bit like a template. But they could be a group of cards. You could create them in an Admin/PB Slide Deck and then see them in the list of Templates (only in Management Reporting). This way you could create the set of Cards, making them look just right. And then add them wherever you need them in other MR.…
-
Concatenate Row Titles
When creating a chart in NUX with more than 1 row dimension, only the top level row entries are displayed as labels. An improvement would be to allow the ability for the user to display all row levels of the chart in the labels so that chart lines/bars etc. within the same top level row dimension can be differentiated.…
-
Add/Edit a List in the UX
In classic – lists were published directly on a dashboard allowing for flexibility in users’ interaction with the list. IE. Adding new list members, reordering existing list members etc. In the UX lists no longer work this way and there is limited flexibility in managing them. For example - Reordering list members is only…
-
Sync App Graph Legend
PROBLEM When I create a dynamic graph in the Anaplan App the elements sync just fine based upon user selection and list synchronization. However the legend does not sync the same as the actual graph elements. SOLUTION PROPOSAL It would be great if elements identified in the graph legend synced the same as the actual items…
-
UX (board) : Grid - formatting by list levels
Hello, It would be great to be able to apply level formatting for hierarchical lists, as is already possible for lineitems summary and row and colunm headers. The idea would be to apply different formatting for data and item names for each level of a hierarchical list, which could be combined with the formatting already…
-
Better Grouped Columns seperator
Hello, Just to inform you that many clients, specially operational users (non Finance Team) ask for having a bold seperator when columns are grouped as shown on the picture. That will really help for detailed results presentation. Thanks
-
UX Page Reset to return to Highest Level as per User Authorisation (not first list item)
Change the behavior of the UX page Reset button next to context selectors such that it resets to the highest level hierarchy that the current user can access. Example: let’s say I have a geographical hierarchy where I have “All Regions”, Regions, Countries, Cities, and I have access to the region EMEA but not “All…
-
Display Success Pop-up for Actions Executed from UX Page Buttons
When executing Actions from UX page buttons, it is currently possible to review pop-ups and error logs in the case of errors or failures. However, when the execution is successful, there is no visible indication. We request the implementation of a Success pop-up confirmation for actions that complete successfully.…
-
UX Formatting for List Items in Rows
For ease of reading tiles in a UX page would be great to be able to format levels of a hierarchy as different colors. For example L1 might be grey, L2 might be blue, L3 might be yellow, etc. Allow user to choose the colors for each level of the hierarchy
-
Tool tips per List item and per Line Item
Not sure if this is the correct section to create an enhancement request but it is an idea to share: Currently it is possible to add a note for published Modules, Line Items and Actions. However I have several customers, one fo them being Shell, who is used to work to hoover over an item and gets the explanation. Today it…
-
Synchronization of Content on UX Pages by Clicking Cells in Addition to Grid Lists
Currently, when clicking on a grid list on a UX page, synchronized content such as graphs switches to reflect the selected list's contents. However, I propose extending this functionality to include synchronization triggered by clicking individual cells, not just grid lists.
-
Flexibility in Graph Orientation for Composite Graphs on UX Pages
I would like the ability to choose the orientation of graphs in composite graphs on UX pages. Currently, when adding a line to a horizontal bar graph, it is necessary to create a composite graph. However, the limitation is that composite graphs only allow the display of horizontal bar graphs. I wish to have the flexibility…
-
Enhanced Action History with Detailed Value Changes
I would like to request the ability to review detailed updates in the history when using Actions in Anaplan. Currently, it is possible to identify who, when, and which Action was executed through the History feature. However, it is not possible to ascertain how values were modified by that specific Action. We would…
-
Request for Opening Links in New Tabs
Currently, users can include links for both text and grid titles. Clicking on a link will direct the user to the URL associated with it. However, a disadvantage of this feature is that it results in the closure of the current page. To avoid this, I kindly request that clicking on a link should open a new tab without…
-
Request to Increase IP AllowList Limit and Extend Application to External Users in Anaplan
We are considering utilizing Anaplan with external stakeholders, and due to security considerations, it is essential for all users to make use of the IP AllowList. However, the current and future projected limits of the IP AllowList fall significantly short of the expected number of users. Consequently, we kindly request…
-
Allow line items to be added for a subset list in a New UX form
As a model builder, I would like to be able to add the line items for a subset list in a New UX form.