-
New UX : Source model selector unsable from page to page
Hi Sorry for the repost if somebody already realized this issue. A client implemented to new ALM feature for the standard UX. She realized that the selector can randomely switch form one source to the other while switching the page. Of course it's very dangerous. She is performing some UAT on the DEV and suddently she…
-
New UX ALM
Dear Community, Got bombarded with messages about New UX ALM. There is a lot of buzz that different cards on a page can be built from different models. I thought it would be better if I post it here for everyone. So here it is, We can not create a page based on multiple models. Relationship of Page to Model is still 1:1 as…
-
Make "Order List" action available to all users
For several of our top clients we require (urgently) the "Order List" action to be executed as a standard user/planner (next to model builders). This would enable users to apply list sortings without being a Workspace Admin, e.g. after adding a new item to a list or prioritizing items. The security on this action can be…
-
User List --> No Access --> Data Loss
Has anyone experienced data loss from changing an end users access to No Access? Clients have experienced major data loss from end users switching teams or leaving the company and all of their inputs (when the User List is applied as a dimension) are removed from the model. I have found that making a "Fake User List" in…
-
ALM setup for parallel release: Spring development and HotFix
I am a newbie and looking for suggestions , ALM best practices for implementing the below scenario. Please advice. Release process being followed in our org.: Sprint Development: Sprint Development Model >>>> QA Testing Model >>>> UAT >>> Production Hot fix: Hot Fix Model >>>> QA Testing Model >>>> UAT >>> Production…
-
Current Period needs to be re-set for ALM models after 8th Aug platform release
When syncing existing ALM models, users will find that the Current Period becomes unset in the Deployed model. This will occur for the first ALM sync after the 8th August Platform Release. The reason for this is due to the Time Label changes that have been introduced and which are documented here:…
-
Production list item protection
Hello, We are in the final stages of an implementation and are running into issues related to marking lists as production data. The problem is that over the course of development many list items have been referenced in line item formulas, so the system prevents these lists from becoming production data. The workarounds…
-
New UX - My Pages User Role
Is it possible to enable/disable My Pages based on user role? My client is asking to make it available only for specific roles. I believe it is only model specific, but wanted to be sure. Thanks!
-
How many environments would be best practice (client is using UX)?
This question came from my new client, who will be going live next week... Currently we have 3 models in the workspace, Dev, Test, and Prod with the Test model feeding the end user App. At some point in the next 2 weeks we will transition the pages to point to the Production model instead of the Test model. Do you…
-
Editing list members
Hi, We have a list which is enabled selective access. That list is used in a report and published in dashboard. The user is able to edit the name of the list members which is not expected. Is there any way I can restrict users from not editing list member name.
-
No Workspace authorization
Can I access modules if I don't work and don't have workspace email id?
-
workspace permissions
Requesting assistance: I am unable to confirm my workspace Administrator permissions.
-
Completing the sync would cause your workspace to exceed its size
Hello Community, We've just identified this error while migrating to ALM one of our Models. This is the second one we are trying to deploy. The approach we've taken is to have One production model + One Dev + One Test Model (DEV and Test both in the same workspace). Model that is failing has 66.5 GB size from a total of…
-
Level 2 - Sprint 1 - Lesson 1.5.6.1 Creating Historic Volumes Module
Hi I have set up the module but I am unable to assign Category as "Data" because this option is not available in the "functional Area" tabl under "category". So I ventured to set up a new category but was unable to do so. Could you please help with how to set up a new category. Anapedia help says I need to get into…
-
Two-factor authentication
Hello I am currently verifying whether Anaplan will be introduced to my company. I was most concerned about security. Anaplan is a SaaS service, so only login + password cannot meet my company's security standards. However, if I can create two-factor authentication, it is likely that I will meet my company's security…
-
Why it takes time to Add Revision Tag and Comp/Sync?
Hi everybody, Comparing to the last project, it takes long time to Add Revision Tag and Comp/Sync even though there has been little structural change. Anyone knows what the major factors could be? Is there anything related to data size? (but list size is small in development model) Best regards, littB
-
Domain and IP Allow Listing
This content is now available in Anaplan Support.
-
Application Lifecycle Management - Explained
Due to popular requests, here is a three part series explaining some of the major concepts of ALM Part1 https://community.anaplan.com/t5/Best-Practices/ALM-Explained-Part-1-Compatibility/ta-p/84294 Part2 https://community.anaplan.com/t5/Best-Practices/ALM-Explained-Part-2-Testing/ta-p/85148 Part3…
-
Level 1 training program Anaplan model builder | Level 2 training program Anaplan model builder
Hello guys. how long does it take to complete the Level 1 training program Anaplan model builder? how long does it take to compete the Level 2 training program Anaplan model builder? it seems a lot of learning material. what is the best practice; (only to fly above as fast as possible)? or take a note of everything that is…
-
How often do you set the sales revenue target?
Hi In ref to the above, Is there a particular time (month) of each year (if annual) that the organisation begins the goal setting by role? (Country Sales Targets etc)? If yes - should access be granted on/off for a limited time period in which the user begins/finishes the target setting process . I understand it lead to…
-
NEW UX: Pivot Accessibility
End user's flexibility to pivot from New UX pages updated? If so, I can't see that option is available. @NewUX@anaplan
-
Change Email-id
what is the step for changing my mail-id?
-
Not able to use CURL APIs to get the token
I am using this curl API to get the auth token, but it is keep giving me error even after entering same username and password, which I have used to log-in into my Anaplan account, Please help here CURL API - curl -X POST --user {user}:'{password}' https://auth.anaplan.com/token/authenticate Error -…
-
Exporting an Anaplan Model
Hi there, I would like to download or export an entire model so that I have a backup stored locally and to reduce storage space. How is this managed through Anaplan? I can see there are some options through Model Management however I don't see any option to Export? Thanks, Liam
-
Level 1 Lesson 15 Security
Hi Could I have some clarification on Role and Selective access please? My understanding is that Selective access is given to individuals and roles are used for job titles. I have attached screenshots of a challenge question and the definition of Selective access and Roles from the lesson. When roles are used to edit lists…
-
Current Period Change during ALM sync
Hi, I was syncing some changes from Prod to Dev and I realized the presence of some changes neither i did, nor did I find anyone else in history making it. Here is a screenshot from the comparison report: This seemed like an inconsequential change so I moved it to prod, later realizing that this changed the current period…
-
Drill down function showing lists in incorrect format
Hi all, Wanted to ask for a best solution of this question if possible. I have a set of data which is populated by a subset. When I drill down into the data, the order of the lists are not in the order they should be. I have checked the list which shows the correct order. Is it possible to change the mappings/settings of…
-
Reverting a model back to fix lag processes that didn't run properly
Hello Everyone, I am trying to revert a model back and I receive the following error: Any
-
How to create Anaplan account?
I want to create Anaplan account, so that I can access work-spaces, can create model, and also complete the required training. I have already created Anaplan community account, but it is not allowing me to log-in to Anaplan from anaplan.com site Can anyone please help me here?
-
Creating production model from existing model
I have a model that I would like to create a production model from. Currently, the model is in the target workspace, not in our development workspace. In order to not break sync, would it be better to move the current model into the development workspace then create a production copy?