-
Apply conditional formatting rules to multiple line items
Currently we have to build a seperate conditional formatting rule for each line item. It would be useful to be able to set a rule up and then apply it to multiple line items in a module
-
NUX Worksheet: Main grid and Default card size change
Hi, Would be a great addition to worksheets if we could configure and save the default spacing between the main grid and a card that is open by default. Currently, the default seems to be 50/50, so every time when you open a worksheet you have to re-align it to see all data. Essentially being able to save the Adjusted view…
-
Bracket negative numbers on the axis of NUX Graphs
Hi, Can an option please be added into the NUX allowing negative numbers to be put in brackets on the axis of graphs on Dashboard. Very unaesthetically pleasing seeing all my numbers formatted with the brackets except for the axis of the graphs. Thanks.
-
More/Better "Out of the Box" Apps + App Hub Refresh
The App Hub can be an incredibly helpful place for idea generation when building out new models, however, the current selections are limited. Can we put in some effort into upgrading the App Hub (more creative, unique models for idea generation) and building a handful of "out-of-the-box" apps for our most popular use cases…
-
Open Old UX Dashboard from New UX
It would be very good if it was possible to link OLD UX dashboards from the NEW UX. As far as I'm aware it's possible to open the list of old UX models from the new UX, meaning there would be at least an additional step from a User point in order to reach what's required. Is this technically possible ? This could be…
-
New UX: Make text box larger when users enter into a text for line item within a board
Need the ability for the text box to either flex with what is being typed into the line item or at a minimum have it be larger. At the moment, it is difficult to follow what you are typing into the text formatted line item if you are typing a sentence. Screenshot below.
-
Ability to Repoint App to a new Model for the whole App instead of Page by Page
When creating a copy of the app I often need to change every page to a new workspace and model. Right now we have to click through one by one for all the pages. It would be great if you could repoint an entire app to use a different workspace and model.
-
New UX Summary - Updated numbers not shown
New UX Summary does not show 'Updated' numbers. Example, export 3.2 Same when run in Classic it shows Updated numbers.
-
Create a hierarchy graph type
The hierarchy view for the workspace admin is very useful but unfortunatley we cannot produce a graph that replicates this functionality for the end users. As partners, we've been regularly asked by our clients to provide more graph related views of the underlying structure and data. The idea of such a graph would be that…
-
Syncronize Initial Page selection on dashboards
Currently Synchronized Paging functionality on dashboards works only once a selection is made manually. However, this doesn't work for Initial Page selected. So if I want all the modules posted default to the same element, I need to check the setting on all of them. I think this should be fixed. As an option, there can be…
-
Confidence Bands/Prediction Intervals - Visualization Enhancements
A really valuable addition to the platform would be better ways to visualize uncertainty. In many parts of planning, particularly those that highly leverage analytics, thinking in terms of probabilities is important. If there’s a relatively simple way to add in this type of visual (confidence bands, prediction intervals,…
-
User Role Notes
It would be helpful to have a Notes function in Users Roles to be able to describe the workgroups typically using that role. Especially with new UX pages now crossing multiple models additional roles are needed to facilitate the cross-model access.
-
Allow 'Select Levels to Show' for the Time Dimension
As a model builder, it would be really great to be able to use the 'Select Levels to Show' on the time dimension. This would allow me to quickly show only base level data or quickly show only summary level. It could be tied to the model settings, so only the summary levels that exist in the respective time range would be…
-
Granularity of Horizontal Object Sizing UX
It would be very useful to have increased granularity when it comes to the object sizing in the UX - as per row sizing for an object, which is wholly flexible, the columns only allow sizing in increments of an inch. Increasing this would allow for better placement and alignment of objects.
-
Field Cards Line Item Restricted
Currently when adding numerous Line Items to a field card you encounter the following "bug"... Once you reach the bottom of the Designer page due to a number of line items being added you are unable to scroll down to edit each line item in Designer screen. There doesn't seem to be a maximum number of line items which can…
-
New UX: Update and Edit List Properties
As an user, I need to be able to edit list properties in page, like I currently can on my classic UX dashboards. While I can create forms and new additions by entering in list properties. After I've created a list member, there is no way in the New UX to update my existing list properties. The biggest pain point for this…
-
New UX: Edit/Change pre-existing Notification Action
With the introduction of the Notification action in the New UX, it would be great to have the ability to edit these actions once created. At the moment, once the notification worksheet action has been created there is no ability to tweak it further - you have to redo the whole thing again.
-
Dynamically adjust Vertical Axis to Zero in Combination Charts
Hi Anaplan, When we plot two numbers that are drastically different i.e. billions versus a % rate, Is it possible to have the scale dynamically adjusted when we only select a particular element to show, so that the vertical axis always start at zero? Thanks!
-
Change G to B on Chart Axis for the unit of Billions
Hi Anaplan, It would be great to change the labelling of G to B to represent Billions on the chart axis, as it makes more commercial sense to end users. Thanks!
-
New UX - Notifications & processes
Hello, I just tried the new notifications action feature, it’s great and very powerful. It would be even better if we could associate it directly with an existing process or Form to only offer a single button on the board.
-
Add items to a list in NUX
Hey, I noticed that one thing in that the Old UX does beeter then the NUX is adding items in a list. When I do the create in the Old UX it takes what parent I am synced to the dashboard, so I don't have to select the parent. In the NUX, you have to select the parent no matter what you are synced to. Is this something that…
-
NUX Ability to Turn off Count, Min, Max etc on Grids
Is there a way to turn off the Count, Min, Max, Average & Sum totals on grids in the New UX? We have instances where due to the layout of the grid these metrics aren't meaningful and actually cause confusion for the users. As an example, we have some account package grids where the line items are pivoted as the columns…
-
Top Anaplan Label color change for Anaplan QA Environments
Can we change the color for Anaplan Label for QA Environment? It is really easy for users to make a mistake if they are switching between Environments to run some changes on Prod, I know that they have a name, but distinctive look of the QA would be very helpful.
-
New UX: Add multiple items at the same time to modules
In classic UX we can add several new items into the list through a module. We would like to do the same in New UX both on board and worksheet.
-
Sparklines on YTD, YTG & All Periods Timescale
Can we have KPI Sparklines working on YTD, YTG & All Period Timescales. As of now it doesn't support these summary levels and it only works on Quarters, Half Years and Full Years
-
Show reference info between UX and model in the model
As administrator I need to understand, where in the NUX this or that module/actions is used, like with classic dashboards. It will be great to have protection from delete actions/modules/saved views if they are used in NUX. Without this reference info it is hard to manage models build with NUX interface and can lead to…
-
Multiple Personal Dashboards (Classic)
Current classic dashboard only allows one personal view to be saved. However, there are many instances where more than one personal view is required. It would be great if there is an ability to save multiple personal dashboard.
-
NUX: Automatically select default values in filters
As a Page Builder, I want to be able to quickly set filters in my NUX cards. When selecting “Filter” I want the first values to be set so I don’t need to click on the only boolean in my module and then select a value (either true or false). The interface currently requires 8 clicks to set a filter, even when a specific…
-
Ability to remove deleted action from New UX
As a Page Builder, I want to be able to remove actions from New UX card even after they are deleted from the model. Currently, once action is deleted from the model, toggle switch for that action disappears, and I can no longer remove the action from the card — I have to delete the whole card and add again a new card with…
-
Resize Drilldown section on Board pages
The option to resize the Drill down pane is not present in Board pages It would be required to resize to look at list members or formulas in more detail. Currently the view appears as below, where list members are truncated It would be great to have the ability to resize the pane Resizing is possible in the Worksheet page…