-
Dashboard Customization
Dashboard personal view is a fantastic feature that significantly improves end user experience, allowing a wide range of personal customizations to be made on dashboards. Currently we have a Master and Personal view available. In our scenario, we have a single Master Development copy, which is being deployed to multiple…
-
Ability to open more than one page in New UX
It'd be good to be able to open more than one page at the same time in the new UX. For example, you may want a summary dash open at the same time as a dash that shows underlying detail. At the moment you have to swap page views which means syncing detail dash views with summaries as you can in classic isn't possible.
-
New enhanced color for conditional formating ,charts and graphs
Anaplan has very few coloring options for conditional formating and visualization. Looking about for possiblity of adding more colors. Eg,RGB(Red,Green,Blue) combination is often used in reporting which is absent in Anaplan. Of course we can start modelling this but at times become inconvenient.
-
New UX: Give builders control over amount of white space in and between cards
The amount of empty space between cards and around the edge of information within a card is excessive. I would like the ability to build a little more compactly but this empty space spreads everything way out. I would like some control over: * how much space cards have between them by default * how big the empty buffer…
-
Specify Card size in new UX
It would be useful to have the functionality to specify a card height and width to ensure all are uniform size like is possible in the current dashboard designer
-
Process include the ability to OPEN a DASHBOARD
I have dashboards filled with buttons, because i can't include all actions in a process. So i have a button to create a blank record in a list, then another button to open the dashboard to enable the user to edit the new record. If we had the ability to assign 'Open Dashboard' actions within a process, this halves my…
-
Remove Anaplan Header Link
Description: Being an Anaplan user, I would like to avoid re-loading of Anaplan page if I occasionally click on "Anaplan" header on the top of the page. Benefit/Impact: Removing of occasional re-load of the page with loosing all of set tabs/modules etc. will allow not to break business work with preparing working view…
-
Change Justification of Line Items - Left/Right/Centered
It would be helpful to be able to be able to change the justification format of a line item for enhanced reporting purposes. For example, we've been asked to have both the text and number formatted line items to be centered to create better readability in a report (as the module has both text and number lines, currently…
-
Allow for selecting of hierarchy levels in page selectors published independently to a dashboard.
Description of the enhancement required: Allow for selecting of hierarchy levels in page selectors published independently to a dashboard. An example of the enhancement: I have published a given page selector to a dashboard that will update 3 views on the dashboard in sync. In the page selector I only want to show Ccs, not…
-
Master views to have the same behavior as the Personal views
We always have this issue when in a dashboard is published a selector list and a table (module) that need to need to be synchronized. In the master view: When a user opens for the first time the master dashboard, the selector is on the default element ( first level 0 element from the list or total element of the list) and…
-
Have display name overwrite for modules/actions
Hi, as model builder it would be very handy to start using naming conventions like in the blog of @joeymorisette Time to Tidy: No More Mess in Your Models. With some naming conversions it would also be easy to sort your modules/actions (or in theory any object) on name, however if you publish modules to a dashboard you…
-
Easily see whether a list or module is used in an Action.
As a model builder, I want to see whether a module or list is referenced by, or used in, an Action. For example, in "General Lists", we can see whether a list is referenced in a module's "Applies To", as a Format, or in a Formula. But we can't easily see, for example, whether the list is used in a Saved Export. The same…
-
Collapsible sections within Dashboards
Description: Collapsible sections within Dashboards Example of enhancement: Currently, we are not able to collapse and expand sections within dashboards. Requesting development team to explore options of extending the dashboard functionality to define separate SECTIONS and COLLAPSE or EXPAND them based on need.…
-
Waterfall subtotals
At the moment it is only possible to have a waterfall if the subtotals keep adding up. A+B=C C+D=E E+F=G This will create a nice waterfall with multiple subtotals. However we have quite some requests to also have the ability to add two subtotals that are on the same level. A+B=C D+E=F C+F=G At the moment we can't put this…
-
Searching a Module on a dashboard should search all data shown
It only recently occurred to me that the search feature built into a module when on a dashboard only returns values from the dimensions, but not the data...which really feels like a missed opportunity. Search should be able to return values from the data itself (maybe even highlight it?) For example, Say I have a module on…
-
Ability to show column-specific tooltips when mousing over a table on a dashboard
Some dashboards end up with large tables with lots of columns shown. It is normal that some of these columns may need a few notes to help a user understand its purpose / intended interactions etc. Currently I use an instructional text box at the top, but this can be very long, hard to read, and frankly overwhelming amount…
-
New Line Items in source Modules, within Saved Views, should be hidden by default.
Current behavior: Create a Saved View within a Module, navigate to that Saved View, publish to a dashboard. Then, close the Saved View and add a new Line Item within that same Module. You will find that the newly created line item is present in the published Module Saved View. Requested behavior: Module Saved Views would…
-
Fully customizable color palette
In order to be more inclusive, it would be nice if all elements of the user AND model builder interfaces were customizable to accomodate color blindness.
-
Read Only Dashboards
We have some dashboards used solely for reporting purposes. However, the person displaying may have the ability to write to the module displayed on the dashboard allowing the dashboard to be edited during the meeting and the blue distracts the audience. It would be great if we could have the option to have "Read Only"…
-
search all fields not just the name/code
Allow for admin to set search breadth, with an option for search to search all fields, not just Name/Code It can be helpful for users to search by name, date, or other key fields that are not the code from the quick search icon rather than having to filter columns
-
Ability to include more than 2 dimensions in combination chart
Description of Enhancement: Currently only one dimension on rows and columns are supported for a combination chart, e.g. stacked bar chart. The customer would like the ability to include more than two dimensions. Example of Enhancement: If you have Time on columns and Products list and line items on rows you would have to…
-
Keyboard key to temporarily toggle between Dashboard Preview & Design Modes
WHAT: I would like to be able to temporarily toggle the Preview mode / Design mode on a dashboard by holding a key on the keyboard, (I suggest CTRL) WHY: This would allow a model builder to... * Quickly jump between the preview state and design state in order to view dashboard's final state, and then return to making…
-
Keyboard Key to toggle Contents Pane Open / Close
I commonly find myself battling Anaplan for screen real estate to see what I want when I want it, and NOT when I don't want to see it. One of the culprits is the Contents Pane, and another as a model builder is the dashboard editing panel or the settings tab. When the Contents Pane is open and one of these others as well,…
-
Grouping Totals Position on Columns
Hello, Similar to the current button 'Totals Position on Rows', I'd like a 'Totals Position on Columns' button instead of using a workaround: pivot rows/columns, set Totals position, pivot again I also take this opportunity to say that Totals cannot really be distinguished from their children in columns, as they are in…
-
On Dashboards add basic text qualities- Eg. Underline, Bold, Italics, Strike-through
When I have a dashboard, and I want to bring attention to different statements, portions of them, highlights, etc. Having the ability to change the text formatting in more ways then the current 5 options: Heading 1 Heading 2 Heading 3 Normal Instructions And allow for changing things within those fomatts; eg. for a…
-
Ability to modify cell values by adjusting a graph curve
Description of enhancement: Be able to modify values by relocating the curve indicator on a graph. How it would help you business process: As-Is behavior of our forecasting application: it allows users to review easily their scope of forecast without modifying measures one by one.
-
Give dashboard elements a "Notes" field so Model Builders can leave development breadcrumbs
When working with a team of model builders sometimes changes to a dashboard aren't obvious, so it would be helpful to be able to leave a note behind for others to read. I could see this being helpful for when a button is added to a dashboard, or a filter is adjusted or a section is moved to a different place, a name of…
-
Let Dashboard Text be Selectable for Copy / Paste
There are many times where I find I'd like to select dashboard text to use as a reference or to send to someone in my company via email etc. It would be nice to be able to select the text on a dashboard's Title, Instructions, headers, notes etc. to use for copy & paste purposes. Better yet, let the model builder have the…
-
Ability to Set an Action Button's Tooltip text globally at the Actions list
I like to use the tooltips to be able to customize what a user sees when hovering over an action button on a dashboard. But in larger models it means if I want each instance of a button to all tell the same story, I have to hunt them all down and change them 1-by-1. It would be very helpful to be able to set the button's…
-
Wrap Text In Cell Headers On Outer Items
As a Dashboard Builder I want to be able to wrap text in columns on outer dimensions So That I can see my full item name if I have a small selection on the inner dimension.