-
NEW UX
How to publish Subsidiary Views in NUX?
-
New Home Page and New UX
How do I stop end users accessing My Pages until we as the local "experts" understand how they work? We have not had a chance to look at, or set up new UX at all. We've turned off the enable My Pages to the models, but the user can still click create, having selected a workspace, and then get to (what I think are) all the…
-
Force a page refresh in New UX?
I have quite a few steps that require the users to hit refresh on the New UX. Does anyone know of a way to force page resets through an action of some sort?
-
Manage Models in New UX
In the new UI, where do I access the 'Manage Models' function? I am able to switch back to the classic view and manage them their, but I was unable to locate in the new view...
-
Anaplan Mobile APP: Landscape issue with cards(image)
Mobile app I am facing a issue while using the Anaplan mobile app with the landscape view for image card, does the landscape view only applies to grid card? Please find the screenshots( includes: View in Classic dashboard,New UX and Mobile APP) This screenshot is of the classic dashboard viewand the same view in mobile app…
-
NUX - Multiple users using the page selectors on a dashboard at the same time
Hi community, I'm working on a Workforce Optimisation tool, where End Users will select a location and the day of the week using the page selector on a page . Relevant information about the number of transactions and the number of staff at that location will display on the page. On a separate page (that also uses the…
-
Timeline and Map Charts
How do I create Timeline and Map Charts in the New UX?
-
Dynamic Cell Access does not seem to work in new UX
Hi, I have created a module with dynamic cell access for a specific line item 'Transfer Site'. It is a list-formatted line item. In a separate access drivers module I have created 2 boolean line items for read and write access which are checked. This gives the possibility to a user with access rights to only 1 site to…
-
NUX Synchronise Page Selector from Line Item
Hi, I'm trying to configure my NUX dashboard to update two separate cards based on a line item list selection. In this example (see attached), I'm updating the Current Period from a field card. This in turn updates the filters on the Group P&L grid card as it is linked to a saved module view. However, I also need it to…
-
New User Experience Feedback
A PDF containing a few of my noted Pros/Cons after a couple weeks of working with the new UX.
-
Field Cards on Mobile App
Hello, In the new UX you cannot publish a line item instead you publish a KPI (number line item), or a field (text line item). Problem: the field card does not display on the mobile app. How can I display a large text field on the mobile app? Any workaround? Are text field display and editing on the mobile app roadmap?…
-
Data entry on mobile in the New UX
Hi, I've created a Board specifically for mobile users. Users will select the time period by inputting a start and end date into a grid. They will also choose the location they want to review using a page selector, and the information on the rest of the page will be updated. When using the mobile app, you can't seem to…
-
Presenting data from different models
Hi all, Is there somewhere that details the different ways in which data from two or more separate models can be used/displayed within the new UX? I'm in the early stages of a new project and need to weigh up if I can just use the new UX to display data from different models in a way which meets our end-users needs or…
-
Time Hierarchy Filter
Hello, I added a Time Hierarchy Filter to my Board mostly so that users can select which year they want to look at. I want this view to be either all Months with a FY total or all Quarterly subtotals with a FY total but currently the view is showing 3 months followed by a quarterly subtotal followed by the next 3 months…
-
Need to be able to format worksheet (bold and indent) in the new UX
I have a customer that would like to move to the new UX, but basic formatting for the worksheets is not available (bold and indenting). When will this be available to our customers. See example below:
-
Model Mode tooltips on new Home page
As a general comment - loving the new Home page, and there's been a really positive reaction from the end users who have seen it so far. That said there is one serious issue with it at present. The new Home page very helpfully shows an icon for each model to indicate the model 'Mode' - but much less helpfully this seems to…
-
Line Items as Page Selectors in NUX
Apparently there is no way we can publish line items as page selectors in NUX. We have dashboards which are driven by pick lists and NUX doesn't provide us the ability to do so. Thanks, Misbah
-
Fixing 'Allow editing' on a Page, NUX.
The problem: When you have built page with grid that allow users to edit data and published it everything is okay. But after when you decide to edit this page and edit any grid, selector is switched off for every grid and you have to turn it on in every grid on a page to allow users enter data. Suggested solution: To save…
-
New UX items brought up to me by one of my clients
Below are a few additional items we found in the new UX we wanted to bring to your attention. When will these items be available? * There is no drill down feature in new UX. * Cannot open source module in new UX dashboards. * When in the Administration function for the new UX, when scrolling through Users or Access…
-
Questions for New UX
Hi everyone, I was just exploring the new UX. So i have few questions: * Like Classic Dashboard, we cannot use drill-down (F8) on worksheets & boards. * Time summary columns are showing up in the beginning. (Starting from FY20, Q4 and then months..) * Is New UX separate from workspace...? It does not take up space of…
-
modules with synchronise selection
How do we configure a module on a new UX board with a feature same as synchronize selection in a dashboard? For example, I have a hierarchy of products- 1. Food 1a. Cakes 1b. Icecreams 2. Cars 2a. Merc 2b. BMW Suppose there are two grids on a board. The first grid contains the parent hierarchy (Food and Cars). When a user…
-
Selectors collapsed
Is there any way to have a hiërarchy collapsed in a selector using the new UX?
-
Ideas for New UX
Hi, Some improvements we hope are coming in the new UX. - Ability to open Multiple Pages at the same time next to each other. - Ability to Open Source Module for a Page Builder whilst designing Pages - Ability to use the standard Anaplan functionality from the old Dashboards. (Sort, Filter, Drill down) - Show 'Used in…
-
Build Guide New UX Basic training
Hi All, I'm taking the basic training that involves the New UX Training Model. I seem to notice that the instructions on the document is not consistent with the interface / structure of the NEW UX e.g. training model says publish wherein the NEW UX platform it says add and context settings of pages and cards are not…
-
Check out Ask Me Anything: New UX
Simon Ritchie, Anaplan's Sr. Director of Product Management, answers popular questions about Anaplan's new user experience. Read the comments below the video to see the questions and answers submitted during our live Q&A session. Click here to watch the video. Note: The live Q&A session is now closed.
-
New UX Training Model - Install
Getting an error while downloading the Training model, and I am unable to install the application. Would it be related to page builder role setup ? As below:
-
Resize a Nested Column
Had a question come up regarding the new UX’s column resizing. In the screenshot, the user has nested columns, and is unable to resize the column automatically to display all text in the “Title Name.” Is there a way to auto-resize nested columns? Thank you!
-
Schemas (351)
Overview: This course provides an overview of the model schema design process. It is highly recommended for anyone intending to take the Model Design class or The Anaplan Way class. A schema is a flexible roadmap for your model build. It is an outline, or a framework, of your vision for the final product you wish to have…
-
Selection of multiple line items for a graph
Hi, I would like to make a combined graph with several line items on the vertical axis. However, it seems like I need to create a saved view that only contains these line items on the vertical axis and now other line items. Otherwise it will show all line items, with no options to hide them. In the standard Anaplan module,…
-
Samples/Ideas
Hi, I would find it very helpful to see a series of screenshots from users and/or Anaplan based on the new UX. I think it would provide me with more of an opportunity to get a wider idea on the "art of the possible" and make the most of the new functionality. Even better if we could get access to a sample app as a…