-
Dynamically filtering line items based on version selected on the page selector
We are looking to filter the line items shown on the dashboard as per each version that is selected by the user. We have built a model for P&L Target Setting wherein different stages of the process are included as versions. There are different line items which are relevant for the various versions according to the process…
-
SLA Function for Call Center Planning
I need some clarification on how/what the SLA function is calculating. Here I have an example of a call center planning scenario where I first input an SLA, Target Response Time, Average Arrival Rate and Average duration to get # of servers using the AGENTS function. I then allow for adjustment to # agents and re-calculate…
-
AGENTS vs. AGENTSB
I am looking for some more background on the differences between these two functions. I understand that AGENTS takes into account the SLA and target response time, but where my confusion lies is moreso with AGENTSB. Agnostic to target response time, how does AGENTSB calculate # of servers based on a 'busy period'? What…
-
Time Submission for a Gannt
Hi ll, I am trying to configure a gannt on the UX. I have a start/end date info in the date formatted LIs. And the exact start and end times (such as 15:03) are in the text formatted LIs. I don't know if Anaplan allows us to submit times within dates for a gannt. You can see in the screenshot that the gannt bar is starting…
-
No error generated for data loads outside of module time frame
When uploading data (via csv file) into a module, no errors or error logs are generated when data load falls outside of the module time frame?? E.g.: uploading data for Jan 2023, when module time frame extends only from Jan 2021 - Dec 2022. 3-21-23 edit: There must a warning/alert from Anaplan when upload file dates fall…
-
New Experience (Report) Cannot copy paste and not available for calculations
Is it possible to enable copy paste in the report? And activate the calculation when you want to block cells?
-
Ability to Filter Dashboard Grid without using quick filters.
Hi Team, We have recently moved to New UX for our client and just wanted to know is there a way we can enable the corresponding action for users as it was there in new UX. We can not ask the user to use ‘Quick Filters’ instead by ‘Quick filters’ can only work with ‘AND’ condition between two filters applied on same column,…
-
NUX Refresh After Selection
Hey builders! I'm having an issue between users making selections in the NUX. 2 out of 3 of us are making boolean time selector and line-item based filter selections on a page without needing to refresh to see the changes take effect. 1 of us needs to refresh the page to see the changes happen. They've tried multiple…
-
export several modules to Excel at once
Hi everyone - if I have several modules (tables) on a dashboard page and I want to export all the modules to Excel at once instead of exporting one by one, is there a way to do that? Thank you, Susan,
-
How can I see which modules are used in App pages?
I am making changes to a list that is used in multiple classic dashboards and NUX pages. I can identify the modules that include the list in their applies to and then identify the dashboards that include those modules. However, the only way I can see how to identify the modules included in the NUX pages is to open each…
-
Conditional Formatting - Extra Options
It would be great to see another condiitonal formatting option where you can change the text/number colour only based on conditions. Particulary with management reporting now having an option where you can make unfavourable variances in red as opposed to the full table cell change colour. It will just make some of our…
-
Is it possible to fix Main grid and Default card size by user?
Hi team. We have been receiving complaints from our users frequently and we can see why this matters to them so much. Dragging to adjust size of Additional Insights cards every single time is time-wasting and painful. Please consider raising this issue to a platform issue level and perform any forms of hotfix/enhancement…
-
Stacked combination chart
Hello, I created some combination charts with only the bars stacked, lines were not stacked. As of today, also the lines seem to be stacked in the same charts, without changes being done ... anyone with the same issue, or a solution ? thanx Filip
-
Can I sync too grids on UX page (That are not part of same hierarchy)
I have two grids. They are related via a system module but they are not part of a hierarchy. Eg. I have a Country List and I have a manager list I have a system module for Manager that has Country as List items. On my UX page, there is a grid that shows Country along with its detail. Is there a way to filter the manager…
-
Is there way to force users to enter correct value
Is there way to force users to enter correct value I have a form that accept users to enter a new value, I want to make sure users can only enter number that is greater than the old value. Is there a way to build this,. I saw the article about error validations but those just show what the error are. I want to make sure…
-
Potential Bug with Field Interface on UX Page
For a list field, the values are not syncing to column selections made on the UX page. In my example, the Approver Status field allows for the end users to select a status and the grid will populate the display the Approval Status. The logic for the Approver Comment follows similarly. Before changing the selection to…
-
Issues with time selector for NUX dashboard
Hi, I can't figure out why the time selector keeps snapping to FY23 when I toggle on "sync on selection" and "sync with page" on card. I've gone through all other cards on my page and switched them all to FY24. Some will stay on FY24, others will revert to FY23 once I toggle on the sync selection options.
-
Is there any way to make dates on go backwards on Grid Card?
Hello, I have a Grid Card that shows a 8-week lookback for Cost (i.e. If current week starts on 2/1, it will have 8 columns with each one going back 1 week, for a total of 8 weeks history). That part is working but it shows the oldest week first. I would rather have it start on the Current Week and then go backwards in…
-
Selective Access Issue : No access ERROR even when there are items being granted access to.
Hello I am struggling with an issue of regarding selective access. So there is hierarchy Region O1, Countries O2, Entities O3. Selective access is enabled for this hierarchy. There are two dashboards. D1 with view Line items in rows and time in columns and O3 in page selectors. D2 with view O3 in rows and Line items in…
-
Is there a way to only show relevant rows in a hierarchy filter?
Hello, I have a dashboard that has a hierarchy filter from Cost Centers -> Jobs (i.e. Cost Center A has 1M in Cost. When I click on it, the Jobs grid card updates to show 10 different jobs that make up that cost. But 2 of those Jobs has $0 cost.) I don't want those 2 Jobs to show up since they are not relevant to the $1M…
-
Change week time labels in UX
Hi, I have a dashboard that will show line items by week. Everything is working well but I don't like seeing the "W/c" in front of every week. Is there a way I can remove that? I want to just see the date (1/2/23 | 1/9/23 | 1/16/23 |1/23/23) Thank you!
-
Is it possible to recreate the graph in the picture on a report?
Hi, I would like to try to recreate this graph (attached) on an Anaplan report, is it possible? Thanks to whoever can help me
-
3.3.12 Activity: Create Product Replenishment UX Page
Hi, In this activity I cannot select the desired month for Planning Period Filter and when applying filter there is something wrong. It's is not same as the screenshot. Somebody please help. I'm attaching the screenshot. Thank You very much.
-
Throw some shapes in Management Reporting!
Very excitingly you can now throw shapes in Management Reporting. All sorts too... No longer means having to do workarounds for coloured backgrounds! Plus I noticed that there's now more precision with the cards themselves and you're able to see relative numbers to other cards - helpful when you want them all the same gap.…
-
Turn off suggested list/line item names in new modeling experiance
Is there any way to turn off this feature? I often just want add a simple correction to a formula, hit enter and move on. Instead of just the minor edit when I hit enter to close the formula editing it grabs the first suggested line item or list name. For example I just need to add an apostrophe and want be able to just…
-
Anaplan Homepage Ability to Hide the Model Tile and Show the App Tile
We just upgraded some of our models with hundreds of users to the NUX. Per the business owner's requirements they wanted to force a migration to the NUX and not allow for the users to use the old dashboards in Classic. To accomplish this we removed all the dashboards in Classic and instructed users to open the App instead.…
-
Display Action run timestamp on New UX
Hi, I was wondering if there is a way to get the action timestamp on the UX for the end user to see. I believe we can export it and then include in a module/list to display but is there any way to make it dynamic?
-
What tool do you use for UX Mockup
Hi, For me excel is the tool of choice but wondering what other tools do you use for UX mockup? Thanks
-
Applications of Newly introduced process/action timestamp .?
Hi Anaplanners, Anaplan is has recently introduced start date and time update w.r.t each process/actions run which has been very helpful. Is there a way through which this timestamp can be published on DB or used in model building..? Thanks in Advance. ~ABhi
-
Zeros on graphics new ux
Hello, I have issues with graphics in the new ux since this week. In my graphics the zero are shown depsite the fact that Plot trailing zeros is off and that the line zero is formated as "blank". Last week it was not the case, so i don't understand why. Can you help with this topic ? Thanks