-
Define import name while creating import
When I am creating a new Import Action, I would find it beneficial to define the name of that Import when I am setting it up for the first time. Today I have to go back into my Import list and rename after the import has been established. By defining the name while I set up the import, it would alleviate the need to…
-
Ability to create a budget version, copied from another version, with values that don't change
I want a version that contains values from another version, but doesn't rely on lists/formulas/etc. Changes to the model should not affect this version copy. Description of the enhancement required: I want to be able to take a copy of a version which is just a copy of the numbers, so once you agree the budget it is copied…
-
Option to enable two-factor authentication for some models
Description of the enhancement required: Option to enable two-factor authentication for some models. An example of the enhancement: The first factor is the password and the second factor can be a randomly generated number from a physical or soft client. A story for why they want the enhancement: If we want to store highly…
-
Open dashboard at end of any process
E.g. put an 'open dashboard' action into a process. Could only be one and it would be at end of process
-
Allow for users to breakback on time and not other hierarchies
I have a customer who wants to use breakback for time but not the other hierarchies in the module. They are planning for cost centers and require users to enter data at the lowest level. However, they want to enter data for annual periods and break back to the months. If we can separate the other hierarchies from time,…
-
show the full text value in the column in read mode
We are designing the display module to show the information the users need to read only, when the value is too long to be displayed in the first line(800px can only hold 126 or 130bytes of string), the users can't see the rest content. Therefore It would be very helpful if in read mode,the user click the cell and the whole…
-
Save Charts as 'Saved View' on modules
Hi Anaplan, It would be great if Anaplan had the ability to save charts to the 'saved views' on modules. Allowing users to re publish and edit charts without having to recreate the chart each time. Thanks, Usman
-
Notification of Customer List Indices close to reaching out their limit By Model and List Name
After the implementation of the new enhancement request that enables the option to reset List Indices for lists reaching out index numbers close to their limit on the Anaplan Platform, customers would like to have a feature on the Anaplan platform that enables Notification of Customer List Indices By Model Name and List…
-
Set Display Name in Line Item Subsets
I would like the ability to (optionally) set a separate Display Name for line items in Line Item Subsets. Whenever the Line Item Subset is used, this Display Name should show instead of the original names of the included line items. This would be really useful when collecting line items from multiple modules, especially…
-
New UX: Middle Align/Center text on cards - Vertically
Hi, As the new UX becomes more and more popular among clients and prospects, it would be great to have the ability to center card text vertically. For now, it seems to work in the horizontal way and then you have to play with the card size to make it appear as if it is centered both horizontally and vertically. It would be…
-
Synchronized Selection to the lowest level
Possibility to synchronize a table (via page selector) to the lowest level to show only the item selected. There is no current impact when selecting the lowest level in a page selector that is synchronizing a dashboard table. Example below:
-
See mappings for file imports
Hello, I constantly run into the same issue and I'm hoping that someone can help suggest a solution. When I create an action that imports from a csv file into a list or module, I always find it difficult to re-open up that import action and revise (or just view) the mapping that was previously created. Instead, I have to…
-
Allow user to set default item on floating page selector
Description of the enhancement: Essentially, we have many dashboards with floating page selectors, e.g. Cost Centre list (or subset). We want to be able to ensure that the dashboards always open with the top level Cost Centre selected, not first leaf item Cost Centre. Business use case: In a scorecard dashboard, we would…
-
Ignore Value Parameter for MIN Function
When using a minimum function, it would be ideal if we could exclude specific values, or a list of values, to avoid returning zeros or another value. For the aggregation function x[MIN:y] you may want to exclude zeros from the formula. Currently the workaround is to use a large number in place of zeros, eg: "IF x = 0 then…
-
Please fix opening a menu from the drill-down view (i.e. to open the source module)
Hi, Currently, if you drill down through several layers of modules and try to open the menu of a module to open the source module it appears as if the menu has not opened. I have learned from experience that the menu does actually appear, but seemingly in a random position further up from the drill down tabs, and floats…
-
Automatically re-open modules after a session timed out
Hello All, As a new model builder I have experienced some frustration with tracing back where I was at if my session times out. This is especially true during the development stages and the solution is moving fairly dynamically and several developers are working on it. It would be a nice improvement if Anaplan could cache…
-
Logging in to the last state where you last left the Model / App modules dashboards selections
Hi Anaplan, As a model builder or end user its is quite a common instance that you are on the Anaplan platform and then you have to leave what you are doing to attend something else. In the current state, Anaplan in most cases will log you out of the platform or close your session because of the time out procedure. I…
-
Option to delete multiple saved view in one delete action
Hi Anaplan Team and community members, I think It would be great if we have a option to delete multiple saved view in a module in one action. Currently I am having a module with 321 saved view out of which I have to delete 167 views one by one which is consuming a lot of time. With a multiple select and delete option ,…
-
Default Settings for new Line Items, Summaries, for Model and Modules
There are two other ideas that exist already one that are by default set sums to off and another that is to set defaults by module. Why limit to just as a whole product or module, why not give a default for builders or similar added to the Model Setting. All models are set to default none for all summaries and line item…
-
Show/Hide line items in Blue Print view
I would like to have the possibility to Show and Hide the line items in the Blue Print as well as the column headers (Parent, Format, Applies to, etc). I would like to have this selection available while the module is open, without the possibility to save the view. This functionality will make it easier while working with…
-
In-product notifications of new features/product changes
I would like a way to be able to see, in Anaplan itself, when a new feature has been added or a something in the product has changed. This would allow me to easily understand changes in the product and give me an easy way to learn more about it so that I can use the new features.
-
Selective Module reordering
I often find that I want to re-order modules within functional areas, but using the ascending/descending order, re-orders all module, not just the ones selected. It would be great if the sort, could be restricted to the highlight modules The following shows how it could look Note that the other modules are not included in…
-
Add a Color palette as a property of list items
Hello everybody! My suggestion is to add an opportunity to select the fixed color that list item will be shown on charts. The problem: If we have two charts on same dashboard the same item can be different color on this charts, first one it can be red and on second it's blue. It's make analising charts slower and more…
-
Set global defaults for column settings
Hi all, I think it would be extremely useful for users to set a global default for column settings when publishing modules to dashboards. These settings would include; - Default Wrap Text in Headers - Eg. 3 lines - Default Column Width - Eg. 100 px - Default Width for Row Labels - Eg. 200 px I think it would be useful to…
-
Add Dashboard Copy to Main Dashboard Screen
Just found out from @usman.zia that you can copy a dashboard but only when it's open, which is a huge time saver. It would be great if the copy dashboard function could also be on the main dashboard screen, where you can see all the dashboards.
-
Add search to the list move reorder dialog box
I'm pretty sure I submitted this before a few years ago but still hoping it can be added. The issue is for long lists that can't be reordered in the "tree" view, it would be extremely helpful for the Move function to have a search or type ahead ability in the move reorder dialog box. Anaplan has added search to nearly…
-
Automatic save to drafts when working on New UX Pages
It would be useful to have some functionality that autosaves work every 60 seconds or so to a draft area in when creating new pages in the New UX, a couple of times I have lost connection to the page and lost my progress - this would bring it more in line with autosaving progress in other cloud solutions at the present…
-
Ability to use add-ins in cloud based software
We would like to use the same capabilities of the Excel and PowerPoint Anaplan add-ins in Google slides and Google spreadsheets.
-
Dashboard Customization
Dashboard personal view is a fantastic feature that significantly improves end user experience, allowing a wide range of personal customizations to be made on dashboards. Currently we have a Master and Personal view available. In our scenario, we have a single Master Development copy, which is being deployed to multiple…
-
Customize Branch Copy Action
Branch copy is a very powerful action, widely used in what-if-scenario analysis. It can also be used to copy, for example, promotion events. The problem is, when we create a copy of a completed promotion event also the status is copied indicating that the newly copied event is also completed, which obviously is not the…