-
Syncronize card template context selectors for Microsoft 365 extension
Summary (See suggestion* for detail) - Improve user experience with user driven context selection for cards in template library, rather than going into the backend and updating each saved card for the required context. Context - The release of the extension - Anaplan for Microsoft 365 allows users to import from cards in…
-
Not able to sync the tables (main table and the subsidiary view)
Hello All, I have an issue where in there is table 1 with below structure: List (category list)Line item1 Line item 2DifferenceA11257A2410-6B11020-10B2633Total3238-6 And there is a table 2, which is a Subsidiary view created based on a source module that is used bring the count/ values in table 1. The purpose of table 2 is…
-
Level 3 4.6.3 SYS14 Module
Hello So I was able to get the desired outcome but the formulas used are not as per the PLANUAL. I have created two system modules SYS04 (dimensioned by P2 Product) and SYS02 (dimensioned by A1 Accounts). But when I try to use the formula SYS02 AccountDetails.Code & SYS04 ProductDetails.Code to use(Line item: CODE) , I get…
-
Level 1 Activity 5 _ Employee expense Lookup Formulas resulting in zeros
I am getting zeros for my lookup formulas in Activity 5 for employee expenses. EMP03 Employee Drivers by Role seems right. Attached SYS08 Employee Details seems right _ Roles, Departments. Attached My lookup reference formula seems right - referencing the EMP03 file and mapping to the associates via Lookup in the Sys08…
-
Automated Email Trigger
Anaplanners, Is it possible to trigger automated mails/notifications from Anaplan to users based on project stages. So if a particular Project X has moved from stage 1 to stage 2, there should be a mail that needs to be sent out to the manager managing the project X. Is the above possible, currently I have followed a…
-
Lv.2 Sprint1 1.5.2
Could you gime me an idea? I don't know why there is no data...
-
Bar graph is showing data for June-22 in all months. How can I fix this?
I have a bar graph on my UX page showing headcount per month, but the chart shows the same data for all months when I've only loaded data for June 2022. I would like to see all other months show 0 until I load additional data for these months. Are there steps to fix this? The data I've loaded does have a month identifier…
-
How can I add a drop down list that allows end user to filter data in grid?
I have a headcount dashboard with grid that shows employee name, team, region, level, etc. The end user will validate the information in the dashboard so I want to give them the option to filter different columns to search for specific fields (employee name, team, region, level, etc.). I have created a card that links to a…
-
Can I add drop down list (with data from a list) to cells that are loaded with data?
Can I add drop down list (with data from a list) to cells that are loaded with data? I've added a validate button, but now I'm trying to create a functionality that allows managers to make changes to data if the loaded data is incorrect. I'm having trouble including both a drop down list and prepopulated data in the same…
-
Anaplan Live! Recap for model builders and technical teams
Now that a couple of months have passed since Anaplan Live! in San Jose, I have finally had a chance to reflect and think back on some of my favorite topics that were covered in the Platform track. I enjoyed the new and rekindled connections I made at the event, but if you're anything like me, you didn't have time to…
-
How to reference a users list in a module
Hello, I want to reference the email address line item from the 'USERS' list to a new system module. Is there a way to reference it?
-
Converting Serial Number to Data Format
Hi, How can i convert serial number to date format in Anaplan? Thanks in advance for helping. Tom
-
Problem with replacing SELECT with LOOKUP
Hi everyone, I am replacing SELECT functions with LOOKUP as a part of model optimization (2.02-14 Avoid using SELECT). I did it lots of times and they worked but I am struggling with couple of them. My approach is that I use mapping module to use LOOKUP instead SELECT. I add list formatted line item and select the list…
-
Invo5 shipping costs
The above image show what has to be done I have attach the data i am getting for shipping cost is wrong I am not able to rectify please help me out what i have done wrong .
-
Import from Subsidiary View
Does anyone know a workaround to import from a subsidiary view?
-
MB 1 13 6 4 and 13 6 5
Community, Working through MB 1- on lesson 13 now to set up UX pages. The results of my first attempt at a Volume Chart, followed by Margin Chart result in something not desired. The line graphs follow along the periods then comes the full year values. The full year values make the visualization unusable from an end user…
-
INV01 Level2
I have attached screenshot ,what booleans I must have checked in INV01 so that my module will be ready for further calaculatons or whatever changes I should made in this module to make it calculation ready.
-
Level 2 Sprint 3 3.3.7.2 Add DCA to INV01 Inventory Ordering
Almost completed the work Just confused regarding my work plz suggest if I am wrong 1. Should I use "Submit Purchase Order Request" line item as formula in AD02 Inventory Ordering for Overrides "Submit Purchase Order - Write? " OR 2. Should I use line item "Submit Purchase Order - Write? " from AD02 Inventory Ordering…
-
IF THEN statement with Time Dimension
`Hi Team, I have a module dimensioned by Employee Roster and Time. In it I have a line item 'Train/Predict'. In this line item I want to add a formula such that if it's a past time period then Train and for future time period = predict. I tied using the following formula - IF ITEM(TIME) <= Current Month? THEN Train ELSE…
-
Classic Dashboard - What does this mean ?
Dear Community Members, I am on MB Lesson 12. I have noticed the phrase "........ on a Classic Dashboard or a UX Page" is mentioned frequently in the lessons. I may have missed it from a previous lesson, but I do not understand what the "Classic Dashboard" refers to. Does this refer to the overall Anaplan Platform…
-
DYK - Week 13
Did You Know? That Functional Areas are directly linked to the Model Map as far as the coloring or the grouping of the modules in the Model map is concerned. Most of us know that we use DISCO as a principle for segregating the modules or grouping them together for Logical (L) element of PLANS which surely helps in creating…
-
Ability to Select Isolated Cells in Quick Sum Bar
When using the quick sum bar functionality (https://help.anaplan.com/anapedia/Content/Modeling/Navigate%20Anaplan/Quick%20Sum%20Bar.html?_ga=2.86794650.366156822.1550101511-1666663741.1546456255), you are currently only able to select "blocks" of cells (a series of cells in adjacent rows/columns). It would be useful to…
-
How to avoid Circular Reference
I am looking for a solution on how to write a formula that takes the value for 1 and Jan 21 and adds that value to the answer to the formula in cell 2 and Jan 21. The formula I have currently is the below. What is in bold is what I need to figure out. IF Financial Projection Time = Financial Projection Time.'1' THEN Sales…
-
Is Something Wrong With my Role List? Level 1
Hi, So while trying to update my Emp02 Employee Expenses module calculations for bonus, car costs, phone costs and medical costs to reference Emp03 Employee Drivers by Role module, I get this error: "Invalid error for 'EMP02 Employee Expenses'.Bonus: Automatic sum of 'EMP03 Employee Drivers by Role'.Bonus % over Role…
-
'List Item' Scope on Formulae
Would it be possible to implement a 'List Item' scope similar to Version Scope against line item formulae within Anaplan. My thinking here would be to allow some list items to be driven by inputs, and other list items to be driven by a formula. This would be a huge enhancement, but in than vein I am unsure as to how…
-
MB 1 Activity 11 3 3 Check your work Error (I think)
Working through MB1 11 3 3 I believe the "Check your Work" reference has an error. Looking for a confirmation from experienced Community Member. The activity required that we Set Style Setting to Summary 2 for the Other Costs Line. I would expect that line to be Bold/Indent like that other Summary 2 Style Formatted line…
-
The ability to select module measurements in Formula scope
Please, add the ability to select module measurements in Formula scope. With this feature you can use both manual input and formula in one LI, not only using the built-in versions, but also the lists and subsets. Advantages: 1. Reducing the number of Line Items. No need to duplicate LI for fact and forecast input. 2.…
-
Summing based on another modules field
Hi team, Hopefully a straight forward one. I have 2 lists. Campaign and Show ID Multiple campaigns can have the same show however they are not within the same hierarchy. I have a module INP01:Campaign Details that has the Show ID as a line item - not all campaigns have show IDs. I have another module INP02:Episodes where…
-
Data not matching In inv01 inventory ordering
I am stuck on this module from last 2 day but not getting how to get data correct my formule are correct The image for data what i have got is below
-
Import data to read quantities per dimension instead of actual data
Hello, I am trying to create an inventory model for a bunch of server farms. i have one csv file with over 15000 machines. For each machine, it shows its location, its manufacturer, the model, how many cpu cores, and a cpu factor. I want to create a module that shows me the average of cpu cores x cpu factor per location.…