Importing and Exporting Data

Level1 Model Building: Import into DAT01 PL Actual and Budget module failed
Hi All, I am facing issue on importing data into P&L Actual and Budget Module For your information, i have mapped time as Period (YYYYMM) Import into DAT01 P&L Actual and Budget module failed: The column headers in the file you are attempting to import do not match the import definition. Have attached mapping and error…
Scheduling refresh in Power BI
I am using Anaplan Connector for Power BI to export data from Anaplan to Power BI, instead of manually refreshing, is there a way to schedule the refresh in Power BI ?
Import failure based on module cell count?
I have just submitted this to Anaplan support, but wanted to run it by the Hive Mind. Any insight into what's going on here would be appreciated. I will update this thread with any answer I receive from Anaplan support! We had a very puzzling issue last week that prevented loading of data. We resolved the issue, but the…
Jumbled Process
Hi All, I have a process named "Import From Data lake SP SG FOM" where lots of actions were placed. For instance, My actions in the following order . Today date.csv and import stock Expiry DC-9205,9209,9207 are to be uploaded files. When I publish the process in the dashboard and click to upload the files, the upload…
Level 1 Model Building: Import data to SYS06 Product Details module
In Module 7 of Level 1 Model building, we are asked to import product data into the Product Details module and map to the source. However, my mapping does not seem to be accurate, and I cannot figure out the issue. I've attached screenshots of what my mapping looks like, as well as what it results in. Any and all help…
level 2 Sprint 2.3.9.1 Import data into DAT03 Historic Volumes module
Hi Community, I am getting an error when i am running process to import historic volumes, beginning inventory and shipping metrics from my data hub model. i think it is due to list used in both modules. In datahub module according to instructions i have used " SKU flat list" and in supply chain module "P3 SKU" list is…
Excel Add-in options
When we produce monthly cost report, we need to keep apart every department because are confidential data (every department can't know the other departments expenses). With the previous tool (BPC) we could exclude empty/zero cells, select the single department and refresh data every month: was not waste of time. Now, if…
Pull the mapping for Imports and source for each model in a tenant
Currently, the only way to extract the information for Import and source mapping is from individual model through the Anaplan interface. These mappings are very useful to track how the data flows across different models and files. To be able to identify how the data flows using this metadata is going to help eliminate a…
Only allow import before certain date
Hi, Can I create logic that only allows end users to perform an Import Action if the today's date has not passed the deadline? Best regards, Johan
Anaplan Connect Import, ERROR: Cannot determine Java version.
Hi! This is my first time using Anaplan connect. I am running a basic authentication to execute an import list action on Windows. Below is my script: @echo off rem This example loads a source text file and runs an Anaplan import into a module. rem For details of how to configure this script see doc\Anaplan Connect User…
Regarding Anaplan Connect Import Scripting
Dear Team , I am using Anaplan Connect on Windows server where i need to write Script for Import/export files from Windows server to Anaplan Application . My Question he as below : Let say I have 1 folder in Windows server named Import Files where ETL jobs keep the file to load into Anaplan System . So once that file is…
Solved! How to Get and Automate the System Date into Anaplan Using Python
Anaplan Community!! Hey, I just published a KT article in the Retail Anaplan Group that shows step by step how to get and automate the import of the system date into Anaplan using Python. Hope you like it! Cheers!
Import to List from Module
Hello Community! Hope you are all doing great. I am trying to import from a Module to a List, but it is not working for me. My LIST is called "Machines by Mill", and the headers in there are the name, the PARENT, the CODE and WORKCENTER: I created a module with those names within LINE ITEMS, and as input, the item that I…
Sample batch file for process in Anaplan Connect
Hi Community, Has anyone got any sample batch files to hand for a process that includes a number of imports? Many thanks, Callum
Updating data trough Excel Add in
Hi all, i have an urgent question: i'm actually trying to import a monthly cost report trough excel add in, the goal is to have a report which I can refresh every month. The problem is that I would like to exclude all the empty cells of the module/view, so during the import trough add in I can see only the full cells. Is…
Export is showing formulas
Hello, I have a grid in the New UX in which one column features Names that link to that persons' email (done through a MAILTO formula in the model). Unfortunately, when I export that grid into an .xlsx, the column populates in excel with the full MAILTO formula, instead of the name it should be showing. Has anyone else…
Export - Labels change order without Deleting and Re-entering
Real world instance: A request to either re-order, add in new columns, or update an existing export with new information. Current Solution: Clear all of the properties prior to the new column's location and re-enter all of the properties that were required to be deleted. This takes time, and is susceptible to mistakes. New…
Run a Process via Informatica (Delete and Insert)
I tried to "run" a process. Process runs when manually clicked in Anaplan. Process has two actions Delete table contents Import data from Data Hub I tried to set as Source : Dummy table from SQL Query (1 Column 1 row : Set = 1) Target : Desired Process (Tried Operation = Insert and Update both failed) Does not seem to…
Getting error when trying to load a file
Hi I am trying to load a data file into my module, using the navigation Action<Import Data Source but getting 'Unmatched Delimiter character '. Please see the screenshot of the error and the datafile. We want to keep double quote (") as the text delimiter for our data import. can you throw some light on what is the issue…
where or what menu that I can see the detail of PR have been submitted last quarter (Q1 - Q3) ?
where or what menu that I can see the detail of PR have been submitted last quarter (Q1 - Q3) ?
Excel Add-in
Hi all, for the monthly cost analysis, I would like to import a customised report via the Excel add in, so that every month I can only refresh the data. When I select the data to be imported via the add in, the system only gives me the modules and views. Should I customise a view? If I customize it, will I be able to see…
List Subset Definition based on formula
Is it possible to add functionality to make list subsets based on formula? Currently we have to either manually select list items to be included in subset or need an import action to update based on subset logic written somewhere else. Can we have option to add formula directly on list subset definition? This will help a…
Make a Line item Sign Change
Hi, I would like to know if it is possible to make a line item that I'm drawing data into from a flat file to make the numbers coming in negative. I have a Flat File where the numbers are negative on the Flat File, but need them to be positive in Anaplan (Vice Versa). How would I go about this without completely changing…
File download issue in running export with python API
Hi Everyone, I have been trying to run an export action and a process containing the export action using python API for Anaplan. The output shows python API running the export perfectly but no file gets downloaded. Can anyone suggest the reason for the same and if any workaround is available for this issue ? I need the…
Bulk Data Change Details in History Log
As a model builder and administrator, it would be a huge improvement if the history log could provide details into Bulk Data Changes. Our company utilizes user imports, and it is very difficult to track down changes when everything is grouped into one line of history. One option is to run history on individual cells of…
Add custom Text Prompt or Dialog Box to Actions
In the new UX, I would love to have the ability to add custom text to the dialog box for imports and other actions, or add a confirmation prompt. For example, "warning: running this submit process will make all entries final and prevent further editing".
Azure Connector informatica
I am trying to bring data from Azure data lake to Anaplan using informatica. But I am getting this error when I create an Azure data lake V2 connection and test it. Has anyone faced similar issue in informatica? Thanks
Have a timestamp on when an action or process was last ran
It would be great to have Anaplan built in functionality to tell a user when an action or process was last ran. This would be extremely helpful in identifing forecast locking, data loads, etc.
Level 1 Model Building
In 10.2.2. we import non employee expense data but the mapping is not working and there are no ideas in the training. Any solutions would be greatly appreciated. Thanks Neil
Level1 exam import the SKU volume data
I imported the csv file but the mapping was not correct and all data was showed on the Jan. Although the time scale is monthly, the data isn't imported per month. Could you tell me how to fix it please?

Importing and Exporting Data

Discussion List