-
Time Range < 1Y
Hello, would be great to have Time Ranges functionality linked to the Current Period & for less than 1Y, e.g. moving two-Q range linked to the current period of the model. This for sure will optimize AN models in terms of speed & workspace size. Best regards Kristina
-
Anaplan Model Calendar - Roll-up Weeks to Months
Anaplan's model calendar rolls up days into weeks and months into quarters but does not roll up weeks into months. As a result of this, June 2020 has 5 weeks: w/c Jun1, Jun 8, Jun 15, Jun 22 and Jun 29. However, w/c Jun 29 has 2 days in June and 5 days in July - and the entire week gets included in July instead of June.…
-
Alphabetically sort List Subsets by name in '"Applies To" popup
It would be great if List Subsets could be sorted alphabetically by name in the "Applies To" popup when changing the dimensionality of a module/line item. When creating a new module, subsets appear under the main list which is very easy to find, however in the "Applies To" popup it's all over the place. This makes it…
-
Dynamic Charts in ALM
I keep having issues where I create a dynamic chart using a time filter (eg. Rolling 13 month filter) however when publishing it to live models it stays static which causes some unnecessary maintenance each month. Can this be fixed??
-
Summary settings: total sum
Hi All, It would be interesting to have an option "Total Sum", that only aggregates the value for the ultimate parent in the hierarchy. This would almost completely remove the need to create flat lists with a lot of benefits: - less complexity; - no mappings between lists; - easier/more intuitive to model While retaining…
-
Ability to Comment Code
The ability to put comment blocks and indents within your formulas, so as to allow model builders to better document and format their code within the models for readability and understanding purposes. This will help align Anaplan's language back to the basic features all other development languages used in an enterprise…
-
Numbered lists to add display name by default
I think it would save a lot of time during initial model setup if the following actions happened when a model builder checks Numbered List within the general lists panel. * New property within checked list created called Display Name. * Display Name property format set to text. * (Potential) Set Display Name property…
-
Improve Keyboard Navigation
Similar to a post by AnaplanIdeas found here, it would be great if Anaplan had improved keyboard navigation. Specifically, if the following areas were navigable by keyboard: * Model settings pane * Lists panel * Modules panel Importantly, if users should be able enter elements using the enter key, rather than having to…
-
update source model default
In the model settings -> Source Models you are able to edit a mapping and change the source to e.g. the production model rather then the development model. For some of our models we have recreated multiple development models (copy of production) this resulted that as source model there are a lot of non existing models…
-
Display Hierarchy Codes against parent nodes in line item
When creating a module with a hierarchy dimension, if the code is used as a line item, the code will display as blank for higher level nodes in the hierarchy. This is not the case in the list screen for example and is very disappointing for business users used to other tools who do not like the workaround of including the…
-
Boolean Format Options
When boolean is selected as a line item format, there should be an option to have single or multiple selections allowed. Currently, the default is to allow multiple selections. For instance, for single-selection, once one line item has been checked, all of the other line items have a greyed out checkbox that cannot be…
-
Keep Dashboard Tables Anchored
When making inputs to large tables, the dashboard will scroll back to the top after making an entry. The ability to have the dashboard stay anchored while entering information would save time for users. We are having to use the maximize feature for each table to input data.
-
Monte Carlo
Have the need to add probablistic algorithms to planning scenearios so users can understand applicable levels of risk (probabilities) per decision.
-
Define Conditional Formatting for a Line Item in the Blueprint
Currently Conditional formatting has to be defined for a view and then published or republished to a dashboard if changes are made. I would like to see the ability to define a conditional format against a line item in the Blueprint instead. In addition the ability to choose whether to show conditional formats or not when…
-
Import into new User subsets
Super excited about User Subsets. However, we will need the ability to import into the user subset to make it useful. Another potential workaround would be the ability to use roles to auto populate the subset.
-
Allow Time Ranges shorter than a year to be created
Time ranges are a useful feature in Anaplan which can often help to reduce sparsity by allowing modellers to create modules just covering the time ranges needed. However, they are currently limited to being a minimum of 1 year long. We are seeing customer use cases which could benefit from being able to have much more…
-
Anaplan should provide a learning environment for Workflow functionality
My understanding is that there is a licensing fee (applied to all non-read-only users within a tenant) that has to be contracted and paid in order to open up the new Workflow functionality. I don't think this is fair, because how are we (as the Anaplan experts and model builders) to understand the technology to be able to…
-
Auto adjust for column width in NUX
It would be great to have a feature to auto adjust the column width as per the length of data entity in NUX.
-
Indicator for line item if its used as a filter
It would be great to have an indicator on line item if it is used as a filter in any saved view.
-
Developers need visibility when view is used in actions or UX pages
For the developers, it is nearly impossible to be sure that by editing a view or line item in a view it will not break any actions. It would be good to have a warning message when a view or line item is used in an action. It would be also great to have quickly accessible info on what views are used in actions and UX pages…
-
Ability to test the model as a non WSA
Hi, It would be great if we could have a button to toggle which will let us replicate the non-WSA access. This will help in cases when there is a single model builder and he needs to test a functionality created for Non - WSA. This should not remove the workspace admin rights but more of like a 'Test as Non WSA' type of…
-
Last Non Zero function in the Time Summary
We often need to pick up the last non-zero in the Time Summary. There is a function "Last Non Blank" for text but we don't have the same functionality for Numbers.
-
Option to have borders on all card types in the NUX
Presently we do not have an option to add borders to any of the cards. With the option to add different types, thickness, colors of borders would give us more flexibility in designing.
-
Modelling using users properties
As a model builder, i d like to be able to model aroynd users properties that are found in "users" panel in order to bring new functionalities to functional admin users, granting them in dedicated modules or actions within a model the following - ability to check users selective accesses rights (read / write permissions)…
-
Ability to indent line items in a module
Besides for the Style on a line, it would be great to have some more control over the indent of various line items, so it can be manually styled to suit various users needs. As some organisations have multiple levels and the default Styles only offer a few limited options.
-
Module Content Panel - Header separators instead of empty modules
As an architect, I would like to have the ability to add bolded headers directly within the modules contents panel to separate a model's modules. Currently this is accomplished via empty modules with delimiter based titles. For example an empty "------ Systems ------" module created above all SYS modules. Having the…
-
Apps > Report: Add Variance between rows
The new feature in Apps > Report to add variance between columns (as shows in the screenshot) is fantastic. It would be very useful to have the same feature to calculate variances between rows, but this is currently unavailable. It would be greatly appreciated if this feature could please be added as soon as possible so we…
-
Open referencing modules and related lists
As a model builder I want to be able to open modules which are referenced by selected module as a blueprint action. This is how I think it could look like: Also I want to be able to open list elements used as dimensions oth the module. (we could not have it in classic US as we could not open multiple lists but now we can!)…
-
Auto sorting subsets list when choosing Applies to or Format
As a model builder I have to search through "the list of the lists" to select necessary dimension in Applies to or a list for line item format. Most of the lists are ordered the same way as we put them in General lists and Line item subsets tabs using "Reorder..." button. But apart from that we have Subset which can be…
-
MAX() and MIN () functions over time periods
Currently you can compare time periods using operators '=', '>' and '<' which is great and very useful. But when it comes to comparing more than two dates, it becomes a nightmare to find a MAX or MIN. Unlike with number or dates, you either have to go through countless IF THEN ELSE cases which is probably impractical or…