-
Include data changes by actions in model history
Description of enhancement requested: Capture all before/after values in history - show what values were before and after for all changes, even if executed by an action How would this help the business process: Administratrators use this information to see what specifically was changed
-
Ability to sort models in model management
A description of the enhancement requested Sort models by size and name in "model management A story for why they want the enhancement (specifically how would it help their business process) To easier sort models
-
Increase 60 minute, no activity model unload
A description of the enhancement required: As an Workspace Admin I want a solution that prevents Anaplan to go out of in memory after 60 min because I need to prevent my end users to be confronted with a long load time. An example of the enhancement: Could be an option to set time slots when a model should always be kept…
-
History Enhancement: Details of changes to workflow status
Description: Currently changes to workflow status appear as follows in model history. ||ID||Date/Time (UTC)||User||Description||Previous Value||New Value||Module/List||Line Item/Property||Target User|| |0001|2017-01-01 00:00:00|user@anaplan.com|Model change (no details available)| | | | | | This does not give any…
-
Use ChatGPT's API to produce commentary and send it back into Anaplan
I've love to see some more native API's to connect Anaplan into ChatGPT API to be able to generate commentary. This would be an application similar to CloudWorks or PlanIQ that allows you to configure certain fields to be selected and then a certain style or questions can be asked to ChatGPT to produce the commentary based…
-
Disable formulas in Version
I would like to see the possibility to disable formulas for an entire Version. This would enable to save a bulk copy of latest forecast without regards to change in logic. Currently this is managed by saving a copy of the entire model but that makes it hard to compare.
-
Item count in subset tab
As a model builder I'd like to be able to see number of items in a subset. The same is applicable for Line item subset.
-
Automatically Sort List Dimensions in "Applies To"
The Planual 2.01-11 states that dimension order should remain consistent among modules to ensure faster calculations so that common dimensions are in the same order as the applies to. I know I am able to click into the Applies To section for a module or line item and then click "OK", and that this will re-sort the list…
-
Referenced by for filters
I would like to see details of whether a module or line item is actively in use as a filter. When a line item is referenced by a formula elsewhere the target line item is displayed in the reference by column. Can this be replicated for line items which are used in all types of filter? This will help significant when…
-
Anaplan Time Range Limitation
I was very surprised recently when I discovered a limitation to Anaplan's permitted time range. It may surprise others to know that Anaplan is limited to supporting only 70 Years (20 past and 50 future) and the maximum number of years possible is 90 (using a time range set, as of writing, to 1981 with 90 periods). I did…
-
Switch Statement Formula
Adding a switch statement formula to Anaplan to get rid of long nested IFs! This would assist in readability (and therefore maintenance) of complex formulae. Switch statements allow you to test a condition, and assign an outcome to each condition. For instance you may have want to test what mode of transport is being used:…
-
Add 'Does Not Contain' as condition when performing a filter on a text formatted line item
Many of our users would find it helpful if when filtering on text formatted line items, there was the option to use 'Does Not Contain'. There is a 'Contains' condition, which has proved helpful, however a 'Does Not Contain' would also provide a lot of value.
-
Dependent dropdown - Based on line items
HI Team, Just realized that the dependent dropdown will work only based on the property that the list has. As we are following the best practice not to create properties in a list, can we make the dependent dropdown based on line items. Agree/Disagree or Any comments? Regards, Kavin.
-
Blueprint View of Saved View
When a saved view is open, it would be really useful to have the option to open the blueprint and only show the line items in the view, rather than the full blueprint. In modules with a lot of line items, when the view has only a small selection of them, it is time consuming to find the respective line items
-
automatic backup
It would be very good to have the possibility of executing an action or process that makes an automatic backup of the model.
-
Increase the size limit of notes
A description of the enhancement required: The notes on line items is 250 characters which isn’t enough. A story for why the enhancement is required (specifically, how would it aid the business process): When you write a note on a formula, you have to explain WHAT is does, WHY you did it, HOW it’s used etc etc, 250 isn’t…
-
Make Versions a Production List
Enabling Versions as a production list would allow business users (not developers) to add flexibility and enable business users better management of versions. Consider the scenario where there is a variable amount of Forecasts that could happen in a year, or if a Forecast becomes current/next.
-
Ability to collapse/group module views
Description: Currently Views when they are setup are listed under a module. It would be useful if there was a way to hide views, only show relevant views to users (i.e. they MUST be able to decide what they want to see not an ADMIN), or at the very least a way to collapse/group the views. Benefit/impact: Currently one of…
-
Ability to archive versions in a model
Desription of the enhancement: We would like the ability to 'archive' versions within a model, so that we can save the data and look back at it later, but it will not take up space. Note that version subsets will not fully meet this requirement, because if you remove a version from a subset in a module, you will lose data…
-
Enable Conditional Formatting using Booleans, Dates and Texts
Presently conditional formatting logic works only on number data type. If it is made to also work on other data types available such as Booleans, Dates, Texts (and lists may be) it would be very helpful and we won't have to work around the missing functionality.
-
Add Notes/Comments on Management Reports
Users(Stakeholders/CEO etc) must have access to add Notes/Comments on the Management Reports they view for better understanding, similar way we have in powerpoint
-
Allow data labels to be scaled into thousands and millions
It would be great to add a feature to enable data labels the option to be scaled in thousands or millions. See screenshot below where the whole numbers look too busy on the graph.
-
Time Ranges with Weeks General
As a model builder working on a supply chain use case, I need to set time ranges when using the Weeks General calendar type. Our current use case requires a daily time scale, and the need to have multiple different ranges of daily data based on historicals/forecast/current week/etc. Using another week calendar type is…
-
Increase 1 million list item limit for Order list action
Requesting to increase the limit of 1 million list item count for Order list action. Currently we will get the following error when list item is over 1 million: Cannot Run ActionThe number of items in the list (1000001) exceeds the maximum allowed (1000000)
-
Lengthb / LENB function
I would like to request a function to get the length of multibyte string in Anaplan. In some countries such as Japan and China, users can use multi-byte characters to enter number and alphabets. Our user wants to avoid entering the list name (i.g. Customer Name) in multi-bytes by mistake. Currently, end users can set same…
-
Enhance "Delete from List Using Selection" by accepting filters in combination with Users list
As a model builder, I would like to have the possibility to create an action with the option "Delete from List Using Selection" by using booleans line-items in combination with the Users List additional the List where it is needed to delete the elements. Currently, when trying to build an action "Delete from List Using…
-
New Model Experience - formula editing field improvement
I am sharing here one idea that would make the New Model Experience even better than it is now: Automatic formula indentation / keeping white spaces and new line hits in formula text It would be quite nice to be able to keep the formulas more friendly-looking and let devs to work with them easier. Colours in formulas made…
-
Toggling between Regular and Blueprint views
This is a really simple suggestion that should (hopefully) be very simple to implement. Problem: When switching/ toggling between Regular and Blueprint views the scroll bar defaults to the top of the module. In modules with large numbers of line items, this means you have to scroll down every time you switch between the…
-
History on Formula Changes
Similar to Cell or Module history, there should be an option to get on demand history on formula changes. An option in blueprint mode to select any line item formula and get history option should be added. This will be helpful to track formula change in multiple model builder environments.
-
Open modules using 'Referenced By' column
It would be really helpful if the 'Referenced By' column opened all modules associated to the line item (similar to clicking on a functional area name to open all associated modules). This could be achieved by SHIFT+LEFT CLICK to differentiate from selecting the cell rather than following the hyperlink. This would be…