-
Display Module size in Bytes in the Module table
When analysing model size, the cell count field in the module tab is very useful. However it does not tell the full story as different data types use different amounts of memory. For example a number will use ~8x as much as an integer. The current setup works well for smaller models, but can be particularly challenging…
-
CoE - Monitoring Licences / Workspaces / Models (Anaplan Model)
Intro: As best practice, you recommend the use of a Center of Excellence to fully support Anaplan in organizations. As part of a CoE, I could not agree more with all benefits that came out following the implementation. Description: What is missing for us is the monitoring of our Licences, Models and Workspaces. As the…
-
Workspace Admin - Preview as a Model Role
As a Workspace Administrator, I would like the ability to "preview" models as if I were a assigned to a model role (other than 'full access') without the Workspace Admin privileges. As a Workspace Admin, I can assign myself to any model role and preview what the model will look like for those end-users. However, still…
-
Add search to the list move reorder dialog box
I'm pretty sure I submitted this before a few years ago but still hoping it can be added. The issue is for long lists that can't be reordered in the "tree" view, it would be extremely helpful for the Move function to have a search or type ahead ability in the move reorder dialog box. Anaplan has added search to nearly…
-
Automation of Back up for Sustainment Models
For all those who have been working on Sustainment models and not much of development tasks but enhancing pre existing solutions in a workspace, it must be a very common daily task to take back ups of a given list of models. The copying and archiving can be a tedious process on a daily basis if the list of models being…
-
Message before session times out
Hello Anaplanners! Please add a message box BEFORE session times out. "The session will time out in XX sec. Press any key to continue your session". Clicking it will continue session. It is very often when you make some work outside Anaplan, but Anaplan is open on second screen. And in some moment you get message that…
-
Enforce session timeout when user is active for long period (e.g. 12 hours)
To enforce a re-authentication for a user per tenant. This is a company security requirement for systems working with Most Confidential data. The requirements are session re-authentication in 12 hours or 15 minutes inactivity The max period a user can stay active should be configurable or potential be specified as an…
-
Automated backup of models
Enhancement request: ability for customer to automatically schedule model backups. Very common issue where data is lost either from changing Prod List to Non-Prod or vice versa or developer A changes formulas that effect Prod, etc. A one time setup preserves data and reduces reliance on humans to backup. The lower the…
-
Audit request - applying filters to history export requests
Background - As a security audit process defined by P&G governance, we have to audit the application logs (from model history) to check if they are backed by request from business. However we do audit only for small subset of the data as the current log from models covers wide range. This being a monthly task, we download…
-
Ability to modify Role Access on Modules / Lists / Actions on a deployed model without ALM
I'd like the option to be able to change a module's role access in our live production model, which uses ALM to sync changes from our development model. This would be the equivalent of selecting production data on a list. This option would help because I wouldn't have to push ALL changes (including those still in…
-
Add Dashboard Copy to Main Dashboard Screen
Just found out from @usman.zia that you can copy a dashboard but only when it's open, which is a huge time saver. It would be great if the copy dashboard function could also be on the main dashboard screen, where you can see all the dashboards.
-
API V2 Enhancement - more info about models
As a member of Anaplan Center of Excellence and user of Anaplan Integration API, I need to get more information about models. In old version of API (1.3), we could get more information about models than in newer one (2.0). The missing (and really useful) data are: -'isoCreationDate' -'lastModified'…
-
Expose Copy and Archive (Model Backups) in API
Currently model backups can only be done via the application interface. The company I am working for does these backups daily and since we support a large number of models this turns out to be a very time consuming process of accessing each model individually and initiating the archiving via the web browser. Exposing this…
-
See in Referenced By column if Line Item is used in Dynamic Cell Access
Hi all, Would be great if it would be possible to see if a line item is referenced for Dynamic Cell Access anywhere. Now you have to find out by trial and error. Kind regards, Maud
-
SSO user Sign-On issues on specific model URL
We use SSO(Single Sign On) for end-user Sign-On to Anaplan. When the SSO user wants to access Anaplan with specific model URL, Redirecting to frontdoor. But SSO users can’t log in to Anaplan via frontdoor page. (They don't have any Anaplan registration since they are SSO authentication only.) In order to resolve above,…
-
Filter References
Hello all! In the modules screen within settings, you can view whether a given module is shown on a dashboard AND which other modules reference that module. This gives a great indication whether or not that module is active OR whether it is a candidate for getting deleted. What is NOT shown, however, is if a given module…
-
Ability to manage Roles > Modules in the same way as Contents
In Contents you can set 'Show New Content' for every Role/Functional Area combination. It'd be good if 'Roles>Modules' tab could be managed in the same way i.e. you could set None/Read/Write per Role/Functional Area whilst still being able to set access by individual module
-
ALM - Merge of code branches
ALM is a fantastic feature allowing to easily promote a current version of a model to a newer version in a few simple clicks. There are a few requirements: the source model has an advance code structure (BASE + NEW CHANGES) and a destination model version is in a place where the source model was before these changes…
-
Hide pages in New UX based on user role
Being able to hide pages in the new UX based on role, not just selective access, in a way similar to Contents for the classic UX would help control user access so that users don't see pages that aren't relevant to their needs.
-
Would like ability to toggle Customers/Tenants in the New UX/Mobile
It would be valuable for effectiveness and efficiency to toggle tenants directly from the New UX "Apps" page and directly on Mobile app instead of having to go to Desktop on classic view and having it sync over. Right now the ability to toggle is a 1 way connection from Desktop classic view which then gets applied over to…
-
Copy-Paste from text into User Selective Access Columns
Being an Anaplan Admin, I would like to be able to copy-paste text values into User Selective Access columns.Currently, Anaplan only accepts either Selective Access List ID or copy-paste directly from Anaplan cells of the same format. Benefit: it will save a lot of time during access review instead of running User Import.…
-
Hiding Saved Views in Classic UX
At the moment within our many models there modules with several saved views. Would be good to be able to "hide" the saved views so that as a modeller I can see the list of modules and then I can see the views either by clicking to expand or via the normal open command in module view. Would make model development a lot…
-
Model 'Time' settings import / export via API as a JSON object
It would be an absolute game changer to have the ability to export model 'Time' settings as a JSON object via the API. Subsequently, the ability to import a modified version of that JSON object to update the model calendar via the API would go hand-in-hand. This would allow for automation of moving the 'Current Period'…
-
Password protection to Excel Add-ins
hi, we've got users who have been asked to increase the security of the data they hold. They currently use Excel Add-ins, and tried putting password protection onto their spreadsheet. However, the data uploads failed with password protection activated (even though they'd already opened the spreadsheet with the password).…
-
Ability to disable selective access for a specific module
We have selective access activated on several lists (mainly organization) and for 90% of our needs it works well. However, in some modules we would like the users to be able to see the data of the entire lists (even if they don't have read access on parts of this list). Currently, the alternatives as we see them are: * to…
-
User Access Management Control
In Anaplan, All the users having "Workspace Admin" are able to add Users to the workspace. I would like to propose an idea in which among all the 'Workspace Admins" only certain set of users among them should have the option of adding new users to the workspace. This will help one to easily manage and keep a track of the…
-
Show whether a line item is used in an action
I'd like ability to see, in blueprint mode for a module, whether a line item is used in an action. This, along with an existing Idea requesting to see if a line item is used as a filter for a Saved View, would significantly speed up model clean-up time
-
Data depersonalization
My company does not want to upload personal data of employees to the cloud. However, there is a need for sales management. Obviously, identifying calculations / reports by identifiers rather than by employee names is not productive. It is necessary to be able to personalize through the identifiers the data received from…
-
'Last Modified: mm/dd/yyyy hh:mm:ss' in Model Management
Think it would be a good idea for 'Last Modified: mm/dd/yyyy hh:mm:ss' to be present as a 'column' that you can also use as a sorting option for your models in Model Management. Would be particularly helpful for determining the date a model was archived, which is a semi-common request made to Anaplan Support.
-
The New UX should have ALM capabilities for managing changes like the old UX
Hi Anaplan, The New UX currently lacks ALM capability like the old UX does. The benefit of this would be managing updates to apps as you currenly can in the old UX. It would great if the New UX had ALM capabilities like the old UX. Thanks, Usman