-
Management Reporting - Styling improvements
This concerns specifically the desire to enhance Management Reporting support for additional font sizes, bold text (not limited to headers), support for bullets, additional presentation styling and adding simple shapes. There are some other overlapping Ideas already in Idea Exchange: * @erik.bangsund : you have a very…
-
Adjustable page size in management reporting
Not sure how others feel about the 4:3 ratio in the new reporting page, but I would consider it pretty outdated for projectors and standard laptop / desktop screens. To my knowledge, only iPads / tablets still use the 4:3 ratio. I would appreciate if it can be adjusted to at least 16:9, but also standard paper sizes like…
-
UX - Set Default Column Widths in Edit Card/Page View
In the new UX, when you drop a grid into the Page, being able to set a 'default' column width, when using a custom view made using the UX. Setting the column width would be helpful, which would make it so you do not cut off line items or can widen columns with content that is greater then the default sizes. Edit:…
-
NewUX-possibility to "Filter" and "Show/Hide" context selectors when "Hierarchy Filter" flag is used
As a page builder, I would like to have the possibility to "Filter" or "Show/Hide" the context selectors for the lists that are in rows or columns sections of the layout of the grids and it was used the "Hierarchy Filter". When a list is in rows/columns section of a grid card or worksheet, it is possible to flag the…
-
New UX - column's width for grids / worksheets
It would be great if it's possible to define the column's width by numbers (% or px). It's a very time-consuming exercise to match it manually if you have similar columns in the same module or similar modules on a page: or
-
New UX: Limited Options for Formatting
The old table formatting (Headings 1-3, Summary 1-3) gave the builder proper options to customise a table. The New UX does not have a BOLD option, nor options other than a single lines (sometimes doubles are needed). In addition, the cell fill is available only in one colour. Please remedy this as the impression from users…
-
NUX Line Item 'Style' Options
Currently the Anaplan NUX lacks options for line item 'Style' that are in the classic UI. Short-term need: As a minimum viable product customers are requesting these same options in the NUX. Examples include, bolding, italics, underlining, indentation etc. Full feature: In addition to the classic options, a full spectrum…
-
dependent dropdown in NUX does not work with "Allow access to unfiltered items"
Dear all, Would be great if the "Allow access to unfiltered items" option is also working in NUX on dependent dropdown: Now it is not possible to select an item in NUX without selecting first all parent levels: In classic this was possible, if no parent level has been selected it is possible to show all: In NUX no option…
-
Formatting of Rows and Columns in a grid view published in New UX
As a user and/or model builder, I want to be able to format items displayed in the rows and columns of a grid view when publishing them in a board or worksheet in the New UX. I also want to be able to save these formatted views for re-use (probably can use the "save card as template" functionality for this). Formatting…
-
NUX Source Model Selection in Mobile App
Currently via the web version of an app in the NUX the source model can be selected. In the mobile app (iOS or Android) the source model selection is not available. It would be helpful to have this as an option. For our specific use case we have multiple source models (1 DEV and 2 PROD) using the same App and have been…
-
Number scaling option on the presentation table on the Management Reporting page
Please enhance the Management Reporting presentation table to support Number scaling. Often times the underlying calculation and output modules are calculated in precise units but that for the Management Reports we want to display in thousands or millions. Particularly with monetary numbers, especially when the numbers are…
-
Change colors to company colors in graphs / Flexible definition of colors with RGB codes
Be able to adjust to thecolor of graphs to corporate designs
-
UX: dynamic narrative of text for Boards and Worksheets
https://help.anaplan.com/594e1b9e-83c6-4041-ae2d-eb80335bda29-Use-dynamic-narrative-on-a-text-card Would be great if we could add dynamic narrative on a text card not only in MR, but across all UX types. It could make UI more compact so depending on selection users can get different insights. And it will not look like a…
-
Could we please have the ability to change the button text displayed when you publish a Process as a
A detailed description of the enhancement that is being requested: Customer wants to have the ability to change the button text displayed when they publish a Process as a button for different dashboards to use different buttons that should all have the same text. For instance, if we have 10 dashboards, with 10 different…
-
Increase number of items in list where hierarchy drop down view is available
if a page selector is part of hierarchy, drop down list is presented with nodes this allows groupping items and easy to navigate inside hierarchy in case number of items inside the list exceeded 1000 , this fuctionality stops working, thus the nodes are not available anymore. please increase number of items up to 10 000…
-
Report: Font Size and Spacing
The New Report Designer Font sizes limit you to - Normal, Instructions, Heading 1, Heading 2, and Heading 3 which is on par with other Anaplan functionality in Model design and UX. However, for such a dynamic tool it would be helpful to have the option to set font size similar to other report designer tools which allow you…
-
Report Page: Zoom add 75% option
Add 75% option to zoom menu. Report pages currently offer only 50%, 100%, 200% and Fit options
-
Ability to mark a NUX app as "Favourite" to access it directly from Home Page
Just like the feature/ability to mark a page as "Favourite", there should be a feature to mark an app also as "Favourite". This will help model builders/users to * Access an app directly from Home Page instead of searching through long list of apps under Apps section
-
Assign Action that does not have the ability to remove the assignment
The assign action provides a great UX for a user to assign a list item to be the numbered list child of another list. In T&Q Use Cases, this can be used to assign accounts to reps. The downside of this action however, is that in the UI, there is a "<" that allows you to remove an account from the rep and thus from that…
-
Assign actions in NUX
Ability to use the "Assign" action in New UX
-
Scroll on multiple grids at the time
Description: When Grids on a dashboard show the same module, or maybe even the same list, there should be an option for setting these grids to be fully synchronised which would allow a user the option to scroll on one of the grids and all fully synchronised selected grids will also scroll.
-
New UX - Copy across functionality
The copy across functionality that we have at the module level should also be available as an option for the end users in New UX. Recently, came across with a use case where users want to copy the same numbers across different rows and columns in a time dimensioned module and the best thing to suggest was to ask for copy-…
-
NUX: Fuctionality of Copying Across and Down data
Copy across and Copy Down is a quick way to copy the value from a selected cell. Could we have this feature in NUX also...
-
Tapping on image linked to another page takes you straight there
As a mobile user, I want to be able to tap an image that I have linked to another page and for it to take me there immediately. On the New UX, clicking anywhere on an image card that is linked to another page takes you to that page. On mobile, the card enlarges (as designed) and the user must click on the small text in the…
-
Doughnut Chart
It would useful to have an additional chart option of a doughnut chart, this could also possibly be combined with a KPI card in the new UX to give additional information, as an example if would look something like this:
-
Management Reporting Request: better ability to set the PDF name on export
Either allow the user to set the name of the PDF export and/or set the PDF export name based on the name of the MR page in the App (not the slide names, the MR name as listed in the breadcrumbs of the app.)
-
Dashboard 'dynamic' grids of saved views
Description of the enhancement required: Saved Views/Dashboards -currently any changes made to a saved view that is published on a dashboard is not updated automatically on the dashboard. There are only two options to have updates reflected: * Republish the view to the dashboard (requires user to reselect all the options…
-
Management Reporting: Export into Landscape
When you are exporting into PDF, the report comes out in portrait mode. If you had slides made in landscape mode, you must rotate them manually. Having the ability to export into Landscape would improve the users' experience.
-
Maximizing Cards to Full Screen in NUX
We have a feature on Classic dashboard which allow us to maximize the grid to the full screen. It has its advantages like scrolling gets reduced and the numbers look finer and bigger. With that said I want to propose this idea of having the similar feature within New UX. As of now I don't think we have such a feature on…
-
NUX Show/Hide user selection persistent after refresh worksheet
It would be very useful if the show/hide feature available on worksheet for end users was keeped in memory after refreshing the page like it is already for filter and sort features. Some users would like to be able to hide some items in the main page without having to recreate their selection every time they refresh the…
