UX Designer

Merging of Process from 2 different Models
Hi, I want to merge 2 processes from two different Models, as I require a single button to be displayed on the dashboard. Is this achievable? Regards, Vaibhav Baddalwar
Level 2 Sprint 3 Product Replenishment UX
@JaredDolich I have created my Product Replenishment UX and I'm at the point where I am verifying the end user checklist. I cannot edit the submit PO request or override suggested order amount. I have added DCA to INV01 for write access but it's still not allowing me to edit the cells. Also, my chart at the bottom of the…
Time Range as Context Selectors for Dashboards
Hi, I'm trying to work out how to have a context selector be a time period which will impact what the users see on charts. The charts themselves would still have the time periods on as well - by quarter or by month. Ideally, I'd be able to choose two months and the charts would update to show the data by month between…
Managing List Item Subsets from NUX
Hello! I faced up with an issue in Anaplan. I am transforming dashboards from old UX to new UX and i need to have an ability to change subsets of a list in this NUX. Now we cannot publish lists to NUX. Is there an easy way to do it? Thank you very much! Anton
Anaplan - Displaying values on UX Pages
Hello all, I have two question about displaying values in Anaplan, specifically on the UX Pages: 1. Is it possible in Anaplan (UX Pages) to write negative numbers in brackets? e.g. instead of – 100 as (100) 2. Is it possible in Anaplan (UX Pages) to insert ‘– ‘ instead of 0 (when no value or value is zero)? e.g. instead of…
Board Page vs Worksheet Page?
The new user experience provides two different types of layouts. A model builder's first step is to decide whether to build something as a board or a worksheet. It might seem as though this is a big decision to make at the outset, but it becomes clear almost immediately when to use each type of page. The other important…
Using a line item with list as a selector
Hello, I have a line item called 'Size' which is a list made of three values "Small, Medium, Large". I was wondering if there is a possibility that I create a UX page with a selector which uses the Size list? If I select Large, it shows me only Large values ? Attached screenshot shows blueprint with list values. Appreciate…
Search a Hierarchy using Code, classic vs. NUX
Hello, I am noticing a behavioral difference between classic vs. NUX. In classic view, let's say I have a module that is dimensionalized by L2 Hierarchy x Line Items. If I have L2 Hierarchy as my page selector, and I have a list member with the code ABC_123, in classic I can search for this in the page selector and return…
Apply Conditional Formatting only to Totals in a worksheet
Hi Anaplan community, I have run into the following conundrum - I want to apply conditional formatting only to the totals of my line items in a worksheet. Now, I know that this isn't possible out of the box as Anaplan applies conditional formatting on a line item basis; however, I checked out this workaround posted…
Sync Problem
In New Ux Page, I have A1,A2,A3 Page selectors, When I select items in A1 it is sync with A2 and A3, But when i am trying selecting Item in A3, It is not sync with A2 and A3. Anyone could Assist?
UX-PAGE:browse on the web page without login?
Can UX-PAGE be loaded on a web page? user not need to log in，browse the UX-PAGE by visiting the web page.Can it be realized?
Hide items in dropdown list
Hi there, I have a list dropdown for our users to select from. However, I am wondering the best way to "hide" certain list items. I want to ensure users don't have the ability to see or select an incorrect item, however I can't delete these list items since they have data tied to them from past years. Attached is a photo…
full line conditional formatting
Hi, If i have 20 line items in a view, i have to conditional format everyone, would be a great idea to be able to format ALL line items using a single line item reference?
Export with labels in NUX
I found that in NUX while I export the grid on a dashboard I am not getting options to Include labels in my export like properties or codes we use to get in Old UX.Is this feature not available or I am missing out something in config?
Delete Action in the NUX
How we can manage the "Delete from list using selection" action in the NUX?
Conditional Formatting
Hi. I'm struggling to understand where I apply conditional formatting.
New UX APPs and Archived Models
Does anyone know what happens to Apps attached to a model that gets archived? My guess is that the Apps are not longer available, so best practice would be to re-point the pages to a different model before archiving the original model.
Conditional Formatting for Field Cards in New UX
Hi All, We have one use case which requires a New UX Page where we use Field Cards for showing some additional information. Some fields contain formulated values while some others are input. Is there a way that we can do conditional formatting for field cards with input values to highlight them? Thanks, Anaswara Suresh
Row Height and Image Display in a Line Item
Finally the wait is over and we have these two features available in Anaplan New UX. This can be seen in Grid Card. Row Height - Four Variants, Standard(Default), Medium, Large and Extra Large Select Line item to Display as Image- By default it will be unchecked and this line item has to be Text->Link Formatted. See below…
Level 2 Sprint 3
@JaredDolich I am at the point where I am comparing my INV01 data to the Anaplan lesson example and my numbers aren't matching. I have a couple of questions about INV01. For Beginning Inventory: My numbers are good until week 4. Then I realized that when triggered the PO Submitted boolean, it showed up in the confirmed PO…
Conditional formatting colors classic UX vs NUX
Hello, I'm looking for some assistance with conditional formatting in the NUX. I am migrating all classic UX dashboards to NUX dashboards. I was able to migrate(by importing the DBs) and I see the conditional formatting applied in the NUX. However, the color choice is not consistent between classic and NUX. I like the…
Cost of Amazon Forecast
Hi. If I want to use Plan IQ, I will have to contract with AWS. Of course, I need to pay to using AWS, but I have to pay a fee to using Amazon Forecast? Is it Anaplan's resposibility?
Export action very slow in New UX
Hi All, I have published a couple of exports on the New UX. However, they take a lot of time in completing the export. There are times when it takes almost >30 seconds for a 3/4 MB export. The same export when run from within the model is much faster. Is this a New UX issue?
Create Action Button in New UX
Hello! Could you please help me: i need to add a button "Add line" to the page in the App in New UX. Is it possible? The action is created, but i see only import/export actions there. Thanks in advance, Anton
NUX Source Model Selection in Mobile App
My team and I can't seem to find the Source Model selection available in the NUX on the mobile app (iOS and Android). All of the context selectors are available and visible, but the Source Model selection doesn't seem to be anywhere. Are we missing it? Is it in a menu somewhere? Or is it not available in the mobile app? We…
New UX-Comment Box
Hi, Is that a way to increased the size of the comment box in the new UX? This can be done in the classic dashboard but apparently not in the UX. Thanks.
Remove memory of previous entries in a text field card
Hi All, I would like to prevent Anaplan from pre-populating a text line item which has been published as a field card to a board with previously used entries. Is this possible? Thanks,
Waterfall chart NUX
Hi, I want to use the following data to create a waterfall chart: In the old UX, my waterfall chart includes an end target: However, in the NUX, the End Total does not appear: Is there something more I have to do in order to visualize the End Total? Br Bjorn
[SubscriptionHasClosedError]
Hi All, I often get the [SubscriptionHasClosedError] and a red diamond while editing the input cells. Any idea what does that mean? Attaching the error message for reference. Thanks
Level 1 13.6.5 Show/Hide Function
I'm trying to build the custom view in activity 13.6.5, however I'm not understanding how to specify which line items to hide (I know to hide all, but Margin) and I know how to open the show/hide specification, but dont understand what I should be selecting in levels or specifying in items to get the view I'm looking for.…

Upcoming Events

Save the Date: Anaplan Workflow - Next Steps in 2026
We’re continuing the conversation! Following the success of our first Anaplan Workflow event, we’re bringing you a deeper look at what’s next. Join us in March as we expand on the insights shared in the previous session and explore how Workflow continues to evolve to support planning collaboration and process efficiency.…
Community Challenge Recap: Annual rollover best practices
In this ACE Spotlight event, we will cover the most effective techniques for making your annual rollovers seamless and repeatable, based on the solutions from our latest Community Q&A Challenge.

UX Designer

Discussion List