-
Editing what is visible when drilling down a calculation
Is it possible to edit what can be seen when a user drills down on a cell? The model has a few complex formulas and the user does not need to seem them but would like to retain the ability to drill down through the different levels of the calculation. Thanks, Chris Heathcote
-
Old UX - Update parent selection based on child selection
Been searching the forum but cannot find a good answer to this challenge. In the old UX, we have dashboards with e.g. two modules where one applies Level 2 (e.g. department) of a hierarchy as a dimension whereas the other applies Level 3 (e.g. employee) of the same hierarchy as a dimension. What we want to achieve is that…
-
Extend the KPI cards Conditional Formatting on Filter driven KPIs
In New UX KPIs can be created in two ways: Line item and View Line item: You can do the conditional formatting on KPI cards as it displays all the line items that are available in your default module. It will not allow you to use filters to drive the selection . Hence the need to extend existing conditional formatting…
-
Actions in new UX
Hi Friends, I have actions and process created in old dashboard. I want to bring that in the new UX. I am trying to assign cards with Process but it is not getting saved. Any suggestions, will be of real help.
-
Horizontal scrollbar gets stuck in New UX
When scrolling left to right in a New UX worksheet page, sometimes the scroll bar gets locked to my mouse movement as if the mouse is still clicked down on the scroll bar, even when it isn't. So, when I'm done scrolling and release the mouse button and move the mouse around, the table still scrolls left and right in…
-
New Filter - From Column not Dimension
I need to create a filter for one of the columns in my module. It is not part of the dimension and it needs to be a drop down select list not the default filters in the module. How do I accomplish this?
-
Line Item Context Selectors to List of line items on a page
When two or more cards a published to a UX page and the line items are placed as context selectors it is not possible to filter or manually limit the selection of these line items without impacting the other cards. This seems to come from the fact that when entering the settings for line items in the page design screen you…
-
New UX Idea - General Selector list items order change
While setting up a P&L report I found out that the order of the elements in a selector is default and cannot be changed. It goes from the upper elements of the list down to the lowest. (See required order below) Even if the order in the list is presented as "grouping after" it does not help. (if you pivot module that P&L…
-
Adding numbered list actions in Anaplan new UX
Hello, I am not able to add numbered list actions such as create , copy and delete in the new UX. Can anyone help me on how to add the said actions in the new UX ? Regards, Rajaram
-
ANAPLAN Optimization for N users
Hi , If we have users of around 10000000 in Sales team and we are using that list (Users) in one module so how can we optimize the structure of module as if that module page is published in Dashboard then it will take time at great extent to open and to load so how can we optimize the page of dashboard so that the user…
-
Build Guide
Where is the 'Download the "Build Guide" from the resources tab' that is mentioned near the end of the New UX Experience Course ? Also where are the MicroSprint Exercises ?
-
New UX - One column needs to be editable
Hello Group, My first post. I created a new module and loaded all all the data we need, but one of the columns is just a place holder for the user to enter a value. How do I make this one column editable? In the UX, when you make it editable, all columns become editable. Thanks.
-
Anaplan Interview Questions
What Is Anaplan? Anaplan - Cloud Based financial planning and performance management platform. Anaplan aims for multi-dimensional planning, and business users who can create and use models. Q3) What Are The Features Of Anaplan? Cloud Based Platform Scalable Modeling Apps catalog In-Memory Engine Graphical Data Presentation…
-
Ability to specify mandatory fields in a dashboard
A detailed description of the enhancement that is being requested: Customer would like the ability to specify the mandatory/optional aspect of a field when designing a new Form on a Dashboard. To provide more clarification, could you please explain how you hope the enhancement would assist in your business process(es)?:…
-
One place manage Page security in one place
if we have manage security for a page, currently we have to go to each page, select a button go to security and manage the access. this is a very time consuming process. having a single page where we can edit the access will make the developer life lot better and helps to save client cost in terms effort required.
-
Set default to Pages based on User preferences
Currently we do not feature to set a page default list selection based on end user preferences. In most cases users want to start a page with predefined defaults.
-
New UX: page/context selectors on cards that synchronise with the elements on the page
It would be useful to be able to publish the page/context selectors as a separate card in the New UX boards so you can decide where on the page you want it to be located instead of being either at the top-right corner or on each of the cards/board elements. This request would pose additional flexibility as at the moment if…
-
Be able to add a specific Page Selector on the top of the Page without publishing a module
In the old UX, we can publish a Page Selector (List > Grid View > View > Publish List as Page Selector on Dashboard) even if we don't have a module at this dimension on the dashboard. For exemple, to publish a Page Selector "P1 COUNTRY" to dynamically filter a module at "P2 STORE" level (child of "P1 COUNTRY") thanks to…
-
View Summary Data at the Bottom of the Page for Grids in Additional Insights
Summary data at the bottom of the page is a nice way to quickly see how numbers in selected cells add up. However, this functionality doesn't work for the grids that are created in the Additional Insight section on worksheets. I would like the summary of selected cells to be working not only for the primary grid, but also…
-
Global Conditional Formatting for Time
Instead of formatting line items in each module with a color for past periods, and current or future periods. I believe there should be a global setting allowing users to have all past periods shaded gray and current/future periods as another color. It would be nice to be able to select these colors rather than a standard…
-
Right align or Right justify override including drop-down list
When my line items reference list items for a drop down it moves the results over the the left. There is no override for to make list items right aligned or right justified. Please provide a right align, center, and left align override within modules.
-
New UX: Arranging content selectors
It would be great to be able to rearrange the content selectors (change the sequence) in the new UX. In classic dashboard, we can changed the views in pivoting or establish a list as page selector. But we are not able to do so in new UX. I am curious how the content selectors are arranged.
-
Manage my app - New UX
Can anyone tell me why am I not able to see "Manage my app" icon? I saw saw that initially, when I entered the page for the first time then after clicking the "Continue" button - I no longer see it now Please advise "
-
Totals and filtering
Hi, I'm trying to implement model where users could easily apply filters on customer list based on segments and subsegments. Problem is that when the user list is filtered by segment or subsegment the customer total doesn't change. Filter is made on user level. Amount of customers, products and users is so high that I…
-
Mapping Data into a Dimension
Hi Community, For a UX Dashboard, I'm trying to have some functionality where the end user can choose a year and a version and it would then populate that data from Jan-Dec in front of them. I'd ideally like them to be able to then choose another year and version and to have both compare to each other. For example, if they…
-
Side by Side NUX Worksheet Configuration
I'd like the option to default the worksheet layout for primary and secondary tables to side by side (left and right tables) as opposed to top by bottom (top and bottom tables).
-
New UX Hiding Time "All Periods" in Custom Views
In the New UX, it would be a good enhancement if Time.All periods could be deselected in much the same way as a Top Level in a list can ben deselected. All Time Periods is a best practice time summary as it can be selected in formulas for checking if any data exists in an ALM deployed model. Currently there are only one…
-
Ability to rearrange Time Periods within Time Dimension in Custom Views of NUX
We should have an ability to rearrange time periods in custom views of NUX. As of now it only allows us to Show/Hide items within time dimension and we have four options of Positioning the time periods. We need an option to customize as per our requirement after all it is a custom view.
-
Filtering custom views on Time only has 1 time summary for P,Q & Y, better to split out
I have encountered the following thing: I have a module on weeks, with summaries for periods, quarters & years. When wanting to filter this in a custom view i can only choose for 1 'Time (summaries)' which in this case covers P, Q & Y. Customers want to filter out in certain circumstances the Periods & Quarters but keep…
-
New UX - create multiple items in forms
I would like to be able to create multiple items at the same time instead of doing one-by-one. That is an equivalent of Add/Create in Numbered list, where you can specify the number of items to be created.