-
Extend Workspace size beyond 130 GB
Current 130 GB limit is not enough for organizations with huge data lists used as the module dimensions. Extending size will help to maintain real-time ability by not splitting solutions into different models/workspaces.
-
Improving Loading Time of Revision Tags (RT)
Once the count of RT's exceed 500, the loading time of the RT's is too long (almost 1 to 1.5 minutes). Probably the loading time can be reduced by restricting the number of rows that are being loaded on the first go. Moreover, the older RT's are not of much use for day-to-day use.
-
Display of Selective Access-enabled Numbered Lists
Although not ideal, sometimes it's required to enable selective access on a numbered list. First of all, you should be able to import comma-delimited text-formatted codes into the Users list to assign the appropriate list members to each user. Short of that, Anaplan requires that you go into the numbered list and select…
-
Display Name User Selection
Hi, At present within Anaplan it is possible to dynamically change the contents of a Display Name (on a numbered list) and to give the end user the ability to change the Display Name (or its alias) as required. However the problem at the moment is that this solution is not scalable. i.e. if User A were to change the…
-
Ability to disable the user administrator from the workspace admin profile
I'd like to have the ability to disable the user administrator from the workspace admin profile. The client always ask me about this because they wouldn't like all the workspace administrator have this task...
-
SSO Integration - Friendly URL
Our company has been recently setup with SSO itnegration with Anaplan. Because of security measures, it had to be done. Now that SSO is there, the URL provided to our users is long and hard to remember. Users have to bookmark it. Issue at hand is that when users click on the custom URL, it changes to typical anaplan url…
-
User Administration export action
My company has a requirement to recertify all users quarterly. I would like an action that would allow me to export all users from the Anaplan Administration Users view. This will allow us to export all users in Anaplan and validate them against our AD users to verify that all users are valid.
-
List model admin
It would be nice to see the primary admin for each model listed when navigating the list of models and also within the model itself.
-
Delete Dormant Users from the Anaplan Tenant Admin Tool
The ability not only to disable but also delete dormant users directly from The Anaplan Tenant Admin tool. The assumption is that the Anaplan Tenant Admin tool can also offer a feature to enable the Tenant Admin to identify how long a specific user or group of users have not logged on to Anaplan models facilitating the…
-
Anaplan Platform Multi-Factor Authentication (MFA)
Multi-factor authentication (MFA) is a method of confirming a user's claimed identity in which a computer user is granted access only after successfully presenting two or more pieces of evidence (or factors) to an authentication mechanism: * Knowledge (something the user and only the user knows) * Possession (something the…
-
Sortable, group-able, concertina-able user lists
Feature request: A way to sort and cascade users, similar to how modules/dashboards can be via functional areas. Large user lists are a nightmare to sort through and maintain. It would be a dream to be able to sort users by say department, so a model owner could quickly sort permissions for new models.
-
Estimated size of deployed model when making changes to dev model
After making changes in dev, we could not synchronise them with the production model because the latter model would have been larger than 130GB. This means that we had to turn off / change the newly developed functionalities because we were not able to estimate the size impact of the changes. It would therefore be great to…
-
User change of access role
We received request from our users for a new functionality that they want to be implemented in Anaplan. They want to be able to change their role and access without having admin privileges. The idea is to grant some users the ability to copy the access of other users, so that they can see the model the way the other users…
-
Not lose your data in Prod model when you change a list from Structural to Production and sync
List A was Structural in dev and prod models. I now want to have list A as production so change it in the dev and sync with Prod. The problem is that as a result I lose my list items in prod model. So when this move from Structural to Production list happens, I would like to be asked whether I want to keep my data as it is…
-
Model copy & archiving before any synchronisation
Before any synchronisation, the model should be copied and archived automatically so if something wrong happens we have a back-up. Benefit: not loosing all your data when you have synchronised after having changed a list from structural to production
-
Enable/disable access to hidden content not as a production feature
Content > View > Enable/disable access to hidden content. This functionality is available in production environment whereas it should rather be set in dev and then synchronised with prod. The fact it can be done in production causes data security issue if it is changed without model builder permission
-
Create a new profile : "Viewer" Workspace Admin
Hello, If you want to check the settings (users, version, list, etc) you have to be "Workspace Admin". This profile is too large ; writte, delete everything. I would like to be able to check, for example, the security without be able to change them. Morever, with this new profile, I can display every list, modules wihtout…
-
Notification of Changes that don't move with ALM
Certain items don't move with ALM, such as production lists updates and direct input (a non formula) into blueprint mode. It would be helpful to get a list of changes that Anaplan logged but are not being updated with ALM. The benefit here is to give an end to end ALM experience to the customer, guiding them to make…
-
Modules and Dashboards Display Who Is Currently Viewing and Last Viewer
Hi All, Modules and Dashboards actively show who is viewing the module and dashboard currenty and who the last viewer was. This will help to show who has seen updates or currenlty active or might be changing something in a module or dashboard. Thanks, Usman
-
The Ability to Identify a Role in Selective Access for a List Instead of Individual Users
The ability to identify a role in Selective Access for a list as opposed to individual users is needed. If you are able to select a role to provision for certain members in a list, you can add users in and out of that role as opposed to individually selecting users that have access to members in a list. This will not only…
-
Ability to define type of license for users
Would be great to have an ability to set license type for users, so no one could accidentelly give a user contributor role when there's only viewer license purchased for him
-
Excel Add-In: Module Security/Restriction
When using the Excel Add-In, there is currently no way to restrict a module from being pulled into Excel if a user is provided access to that module. We have multiple users whose roles require them to view confidential data within Anaplan, but they should not have the ability to export the data out of Anaplan. Within…
-
Date Stamp - for manually entered reference data
Create a Date Stamp function simliar to GETDATE() from MS SQL, to remove manual inserted dates to allow business teams to know when key pieces of data were manipulated WITHOUT going into the history section.
-
Mutual Authetication for Anaplan V2 connector for informatica i-paas
As of today, Anaplan v2 connector in informatica i-paas only use client authetication, it does not offer server athetication. While today's security demand is for Mutual authetciation. such an enhancement should be made to support Mutual authentication using CA certificates.
-
Allow actions to apply to different User Roles
Right now, actions can open different dashboards depending on a list property. However, it would also be convenient if different dashboards could open based on the user's role.
-
Automate reset of Selective Access
We're looking for a way to automate updates of selective access which would include: 1) clear all existing list member access 2) set new list access. Would like to have this automated via an import action. Current imports into Selective Access appear to only be acretive. Importing NO ACCESS into User Role, reloading…
-
Create a Roles List That Can Be Referenced in Modules
Having a Roles list that is auto-generated and able to be leveraged in modules would be very helpful. For example, in certain system/admin modules we assign read/write drivers on partiucular line items. Currently, the users list is leveraged to dynamically change the access via a formula and an import. However, having the…
-
Search for model from all accessible models in tiles/model select
As a user I have forgotten which customer a model is in if I have a lot of models across a lot of customers. I would like to search models from all customers / all models I have access to from the tiles/modelSelect search bar. This could also be implemented as a Customer : [Any] option in the advanced filter bar.
-
Function that returns a user's role
There are times I would like to show or hide data, allow access, etc. based on the user's role. For example, some data is sensitive, and I would like to use Dynamic Cell Access to allow someone with the user role "Admin" to read/write the sensitive information, while someone without the Admin role would see nothing.…
-
[ALM] When using Production Data imports, there is no source file in the prod model, meaning you can
[ALM] When using Production Data imports, there is no source file in the prod model, meaning you can not edit it. As it is deployed, you can not upload the file either Currently when using Production Data imports, you cannot edit file imports as they give a message to say "The uploaded file is no longer available; please…