-
New UX: Set a Default Source Model in each Slide / Dynamic way to refresh source Model
It would be useful to have an option to set a Default Source Model in each Slide of the Report allowing users to reconcile data between 2 or 3 models in a single Report without the need of reselecting source Model in each Slide again and again AND/OR instead of opening multiple Reports side by side and do reconciliation.…
-
Allow the Page Builder to select if a Card will show in the Mobile App or not
There are situations where certain cards are used purely to get other cards to be properly aligned. There are other cards that make sense/are nice in the desktop experience but are extra/noisy in the Mobile experience. The request: give the ability for the PB to uncheck a switch/slider. The result would be that the…
-
New UX - ‘Publish selected line items to dashboard’ on Cards
Hi, I’m wanting to add a card on the below Worksheet in the new UX, and I’ve got 2 questions/enhancement suggestions. Firstly, when I’ve pivoted my saved view to how I want to show it in my card, I only want to see the text box, and in my saved view, I’ve reduced the left hand column, to 6pixels in length, but when it…
-
New UX - Add Collapsible Cards on Boards
It would be great to be able to add collapse cards on the boards - similar to Additional Insights- . It will allow the view to be clean but will also house the information to be accessible without going to another page. Boards are especially helpful when displaying charts and key KPIs and being able to house the supporting…
-
Interaction between 2 cards in NUX
Hi, I think it would be useful if we could sort cards simultaneously. Specifically, to sort a table and a bar chart at the same time. For example, I have a table of countries (list) with their price and volume values ( line items). A bar chart is used for visual presentation of this data as well. If I sort (from highest to…
-
New UX Idea - Line item list selector expand width of the selection window
It will be very convenient to setup width value of a window where user selects a list item. Or to make it always be as wide as the longest list item name plus width of tabbed white-space due to hierarchy visualization. This is how it works in Classic UX: New UX is shrunk too much. The same problem appears in fields: Yes,…
-
Optimize NUX Pages - Title
Whenever the Title of the card is input, it eats up a lot of real estate vertically as it pushes down the card contents. Can this be optimized so that the real estate can be put to better use.
-
UX idea: Pictures on published actions and processes
To make interface more user-friendly I propose to add ability to appy some images instead of action labels. Currently you can use emojis instead of an action label. But this means you are limited by existing emojis and they also can look diferent on different browsers and devices. Would be nice if we could choose an image…
-
Background Color of User Input Fields on New UX
Hi, I recently received feedback from the users that the input fields are not very distinct from the calculated fields on the new UX. Conditional formatting can help us change the background colour but I fear it can confuse the user if there is another genuine Conditional Formatting on the same line item. It would be…
-
Report Page - Table formatting options for font size and colors
Enable increasing the font size of tables in a Report page similar to font size in text card. On placing a text card next to the tables card, the font size in tables are very small in comparison to other text. For better readability, it would be great to have this feature enabled. Adding colors for text would a "good to…
-
New UX Report Page: Add Guidelines
Please add ability for page builders to add vertical and horizontal guidelines to report pages. Objects (tables, KPIs, text, etc) should snap to these guidelines. Similar functionality exists in programs such as Microsoft Publisher and Adobe Illustrator. This would be helpful in creating 'pixel perfect' aligned reports…
-
New UX: Add functionality to hide top level in list when it's used as line item in grid
When a list formatted item with a top level is used as a line item in a grid, there is no option to hide or make the top level not selectable without completing a workaround. This request is to add an option to hide top level or make the top level uneditable/selectable on new UX page.
-
Report Page - Set Context for the Columns on a Table
The new Report Page is great, but having used it for a few days I notice that I am unable to set the Context for the dimension that is on the Columns of a Table. This is possible on a chart, but not a Table. Hopefully just an initial oversight.
-
New UX Report: Add Snap to Grid
On report pages, please add a snap to grid feature. Objects placed on the report page should snap to the page grid. Please add a toggle to allow page builders to overlay a grid when editing a page. Finally, please give page builders the ability to change the size/spacing of the grid.
-
Extending styling options for Line charts - weight of lines
Hi Team, As a page builder I would like to have multiple line width options in NewUX like it is implemented in Excel so that I could separate lines from each other. It may help end users faster and better read and analize data on charts with lots of lines. Many thanks for your support Regards, Danil
-
Comments on report cards
As an user, I would like to be able to add comments to the report cards, in the same way that it is already available for board and worksheet pages. This would allow users to take advantage of the collaboration functionalities within Anaplan and increase the use and engagement of the tool.
-
NUX Comments - Include comments when duplicating a page or duplicating an app
Currently when you duplicate a page or even the app, you do not bring with it any of the comments. This can be quite limiting when building, as then you cannot pivot the information of your page without losing the comments. Also, if that page is deleted, you will lose all of the comments permanently (as Anaplan cannot…
-
Ability to display List Item attributes as row headers (for the list specified as Rows)
This is similar to the Export Option "show Labels". The current workaround is to expose the attributes as line items (assuming line items are in columns) which can get very problematic when combined with another dimensions where the attribute does not apply, like Time. And then you're forced to select specific combinations…
-
Image/Branding and formatting of Page Title bar
In the New UX at the moment we have a very limited space on the page. We want to limit scrolling as much as possible but have more basic customization and branding features. As such I think that the ability of placing an image and maybe even more details on the page title would be great ! Here is a random example of a menu…
-
New UX - copy pasting with right-click menu
When I want copy or paste data in cell(s) in new UX using right-click menu, it doesn't allow me to do it and tells to use hotkeys instead. As an end user I would like to be able to copy/paste data by right-clicking without using hotkeys. This would be a benefit as it would help end users that are not technically proficient.
-
Quick Links in New UX
Hi Everyone, I would like to suggest an idea about quick links. New ux is the one which will highlight our modeling efforts, in the process of building the n number of dashboards in each category I have found one conflict. In worksheet we will give quick links for easy navigation, what I have found here if we want to…
-
"Details" option in Activity not to be disabled when a Cloudworks integration/process has run
After a Clouworks integration/process has run the "Details" option when clicking "view activity" from the "overview" tab in the sidebar for each task is disabled. It would be useful if details of how many records are updated, ignored, created are displayed per integration or process when the task has been successful and,…
-
Personalize Anaplan
Is Anaplan getting upgraded to personalize with colors of the organization? I know about the third party application but it's difficult to do that with every user we have.
-
When Process is Running: Status Popup or Badge on new UX pages
Request concerning UX: When an action is running (like import/export) it slows the system. In Classic UX dashboards the platform provides a popup indicating to the users that the action is ongoing, and who triggered it. This gives the users comfort that slowness is under control and for a known period of time. There is no…
-
Copy Data Shown in Drill Down New UX
Not sure how many people have stumbled upon this but, it is not currently possible to copy data from a table presented when drilling down in the New UX. Not sure what is preventing this from happening but hopefully a quick fix that has multiple benefits.
-
Ability to Format Cells and Cell Contents
Give the user or then model builder the ability to format the line and data not just the line item name, need to be able to control: * Font (bold, underline, italic, etc) * Font Size * Text Colour * Cell background colour (fixed colour, different functionality to conditional formatting) * Text Allignment (left, centre,…
-
In NUX, Ability to add cards referencing different models in the same Dashboard
Currently in NUX, we don't have the ability to point different cards in the same dashboard to different models. E.g. The customer wants to see milestones that are defined in the R&D portfolio planning model and input the volume to calculate the cost that resides in the Finance Model, all in one dashboard. Would love to…
-
NewUX: Header alignment improvement with design principles
NewUX should follow the basic rule of design, the principle of alignment. The row header and Item should be aligned on top, and the column header should be aligned on the right, this simple adjustment will greatly improve the visibility. Following is comparison with tableau which follow the principle of alignment. (quiet…
-
Decimal places default value to be 2 instead of 0
By default, when changing number to have decimal places, the number of places is 0. After finishing L1 model building course, I realized that most of the time the number of digital places is changes to 2, so I suggest it would be the default value for that action.
-
Conditional Formatting Expansion
I have a need to have more than 3 "anchors" for conditional formatting. I've used an additional line item to try to use shading between the three standard anchors but that is not an ideal look. Preference would be to have at least 5.